APR

The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise. The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple upgrade will last the test of time, unlike others, and packs a limited lifetime warranty against cracking! We offer the mount in two different configurations depending on the style of your factory mount. Be sure to check your subframe mount before purchase.

Read more less

APR Carbon Open Intake System - MQB - 1.8T and 2.0T EA888 Gen 3The APR Open Carbon Fiber Intake System is the ultimate intake system for the 1.8T/2.0T Engine! We've maximized performance and sound dramatically by reducing pressure drop and increasing airflow. This translates to more horsepower and torque, and less physical strain on the turbocharger. The system looks great, sounds amazing, and produces more horsepower and torque you can feel.Our beautiful carbon fiber intake system does away with the closed airbox design and uses a massive 7" washable and reusable cotton filter with a frontal inlet and 4" rear outlet. This was necessary to limit pressure drop across the factory system and maximize airflow, while allowing you to fully hear the engine breathe! The massive filter provides excellent filtration. By oversizing the filter, we're able to limit pressure drop without sacrificing filtration. This is made possible through the use of greatly increased filter surface area. Carbon fiber not only looks great, but it allows us to make a complex and organic heat shield shape that keeps hot air pushed through the frontal radiator away from the intake tract. Furthermore carbon fiber allows us to limit wall thickness on the intake pipe, maximizing the pipe's internal diameter and thus airflow. Lastly, carbon fiber retains heat less than other materials, such as metal, making it ideal for performance.The factory intake system simply can’t match the performance of our intake system. The full factory frontal airbox only flows 521 CFM at 28” of H2O. We improved this by 60% with our open airbox, which flows 833 CFM by comparison! However, it’s important to always look at the intake system as a whole as flow numbers alone don’t always speak to the broader picture. The factory turbocharger can only flow just under 400 CFM through the factory opening, and any intake system will lessen maximum flow. The goal is to minimize all restrictions before the turbocharger as much as possible to maximize performance. The full factory system brings this down to 275 CFM, or 31% less. The full APR System (Open airbox, rear pipe, and turbo inlet pipe), bring this down to 345 CFM, which is only 13% less, or a 25% improvement over stock! This directly translates to more power you can feel. Our full bolt on APR Tuned S3 saw max gains of 12 AWHP and 13 AWFT-LBS of torque using the full intake system compared to stock! These are solid gains that make a noticeable difference in performance!

Read more less

Key Points: Addresses both issues with the OEM design Cast 304 stainless steel eliminates flexible plastic OEM design CNC-machined solid mounts eliminate rubber OEM bushings Removes play, slop and the rubbery feeling of the OEM part Will not flex, wear out and / or break under prolonged use Lifetime warranty APR is pleased to present the Solid Shifter Cable Bracket. Through countless years of professional racing, APR Motorsport identified the factory shifter cable bracket system as a source of sloppy shifts, missed gears, bracket and bushing failure and even transmission failure. The factory shifter cable bracket is made from plastic with rubber bushings. Over time the bushings wear out, and during long races, heat can cause the bracket to flex and break. To alleviate all issues related with the factory design and not just some, APR's Mechanical Engineers created the ultimate and final upgrade: The APR Solid Shifter Cable Bracket.

Read more less

This disc installation kit come with everything you need to install 356x22 rear brake discs (including the RS7 wavy discs) to the rear of the following cars:- Mk7 Golf GTI Performance Pack- Mk7 Golf GTI Clubsport- Mk7 Golf 'R'- S3 8V Quattro- RS3 8V Quattro The caliper carriers in this kit are made from steel for strength. To ensure correct fitment our kit also includes a pair of centring rings to reduce the larger internal diameter of the discs so they fit like OE. Lastly the fitting kit include bolts are M12x1.5 and are of high tensile strength with good quality spring washers. New pads are highly recommended to be installed. Included in our kit:2x Vagbremtechnic caliper carriers4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts2x Centre bore adapters To complete this rear brake kit you will need:1x Set of brake pads to suit your driving style1x Pair of rear brake discs2x Brake discs (if not purchasing from us) Weights:Our adaption kit - 0.6kg totalHooked or Grooved rear discs -  8.7kg per side (17.4kg total) RS7 wavy rear discs - 7.4kg per side (14.8kg total)OE Standard 310mm disc - 6.8kg per side (13.6kg total)

Read more less

APR Roll-Control Rear Stabiliser Bar- Diameter: 25mm- Construction: Weight Saving Hollow Bar APR Roll-Control Stabiliser Bars are designed to improve corner handling without diminishing ride quality. This simple, yet effective upgrade reduces cornering load differentials between your vehicle’s inner and outer wheels during cornering. In doing so they improve the vehicle’s under and oversteer balance, giving the vehicle greater stability and control, with increased grip. Each bar is manufactured using the latest high-end techniques to offer a strong, weldless design capable of withstanding harsh track conditions. Front and rear bars are sold separately, but are designed for use together. Rear bars include a new set of poly bushings to further reduce undesirable suspension flex. Front bars also include new bushings, as well as new mounting brackets with hardware, and billet spacers. Lastly, where applicable, some bars offer further fine-tuning through the addition of multiple suspension pickup-points

Read more less

APR Roll-Control Front Stabiliser Bar- Diameter: 28mm- Construction: Weight Saving Hollow Bar APR Roll-Control Stabiliser Bars are designed to improve corner handling without diminishing ride quality. This simple, yet effective upgrade reduces cornering load differentials between your vehicle’s inner and outer wheels during cornering. In doing so they improve the vehicle’s under and oversteer balance, giving the vehicle greater stability and control, with increased grip. Each bar is manufactured using the latest high-end techniques to offer a strong, weldless design capable of withstanding harsh track conditions. Front and rear bars are sold separately, but are designed for use together. Rear bars include a new set of poly bushings to further reduce undesirable suspension flex. Front bars also include new bushings, as well as new mounting brackets with hardware, and billet spacers. Lastly, where applicable, some bars offer further fine-tuning through the addition of multiple suspension pickup-points

Read more less

Looking for a replacement filter for your APR / APR Carbon Air Intake? Look no further. Fits The following engines with APR or APR Carbon intakes:* 2.0TSI Transverse* 1.8T 20v  Note: Hose clip not included

Read more less

APR Carbon Intake System - MQB 1.8T / 2.0T EA888 Gen 3 The APR Carbon fibre Intake System is an attractive high performance upgrade for the latest 1.8T and 2.0T engines as found in various MQB platform vehicles. The factory intake design has the foundation for excellent performance, but much of this is sacrificed in an effort to meet other design requirements. With requirements set forth for only supporting factory power output levels, low engine sound levels and long service intervals, there is plenty of room for improvement. The APR Carbon fibre Intake System increases performance primarily by improving mass airflow through the system while still proving adequate filtration. Expect greater horsepower and torque through the power band with a more direct and responsive feel upon pressing the throttle. Sounds from the engine and turbocharger are enhanced and some may even experience better fuel economy depending on driving style.Research and Development: Uncommon to most in the market today, APR spared no expenses during the research and development period. For the better part of a year, APR’s Mechanical Engineers created several prototype intake designs utilizing our in house Sterolithography 3D printer and other rapid prototyping techniques. Various filter mediums were tested in conjunction with the new intake designs through simulated models, flow bench analysis, dyno data collection and in real world applications all in an effort to derive the best possible solution.Intake Air Temperature Management: Intake air temperature (IAT) plays a critical role in engine performance, especially on turbocharged engines where the ambient air temperature is raised twice through both compression via the turbocharger, and then again during the engine’s compression stroke. In an effort to maintain the lowest possible starting IAT, the APR Intake system begins by drawing air from the coldest possible location, which is the front end of the vehicle before the radiator. Air travels a short path through the intake system, past the filter and on its way to the turbocharger through a sealed intake design that prevents ingestion of hot, under-hood air. Finally, the intake’s carbon composite design features a thin fibreglass backing, which improves thermal insulative properties. Filtration: APR’s design requirements called for an intake filter medium that exhibited high flow capabilities, long service life and adequate filtration properties. While traditional paper filters and even some foam filters can achieve one or more of these requirements, only a pleated cotton filter was able to achieve all three. This is due in part to the intake housing’s volute design and turning vanes. With even pressure flow distribution across the entire filter element, the filter is loaded more evenly, retaining performance over time, increasing the length of the maintenance intervals, and increasing the filter's effectiveness.Sound: In an effort to please customers unaware of the sounds caused by turbocharging an engine, as well as cross platform use on both economy and performance oriented vehicles, the OEM was tasked with creating an intake that many would consider to be too quiet for a performance vehicle. APR’s design requirements called for an intake system that only delivered the engine’s true turbocharged sound as air is sucked through the turbocharger or exhausted from the diverter valve upon lifting off the throttle. The inherent stiffness of carbon fiber composite material results in an induction resonance from the engine allowing the occupants to hear a clean and crisp intake note without being overbearing or cheap sounding in nature.Installation: The intake system comes pre-assembled from APR ready to be installed in minutes with minimal tools. With the factory unit removed, the intake slips into place and connects to the factory turbo inlet pipe using the OEM hardware without filling the engine bay with additional couplers and hose clamps. Because the system fits in the OEM location, it’s fully compatible with future upgrades from APR, including our larger Stage III Turbocharger Systems.Optional APR Silicone Coolant Hose:The factory coolant hose is designed to be routed over the top of the intake system. However, when routed underneath the intake, it’s far more aesthetically appealing. The APR coolant hose replaces the factory unit and routes cleanly under the intake and around the APR catch can without kinking or adding extra stress to the mounting points.

Read more less

APR Carbon Intake Pipe - EA888 Gen 3 1.8TFSI / 2.0TFSI The APR Carbon fibre Turbo Inlet Pipe replaces the rear factory plastic accordion tube with an attractive carbon fibre inlet, complementing the APR Intake System’s aesthetically pleasing design. The intake and inlet hose are joined via a necessary flex coupler to allow for adequate engine movement under use without damaging the intake. The turbo inlet pipe is completely compatible with all factory turbochargers and APR’s Stage III Turbocharger System.

Read more less

The APR Intercooler System is a OEM-location upgrade that dramatically reduces intake air temperature (IAT), minimises heat soak, and provides increased performance! The system is a direct bolt-on upgrade that requires no trimming and is recommended at every stage of performance. APR Presents the 1.8T/2.0T Intercooler System for MQB Platform Vehicles! The APR Intercooler System is a OEM location upgrade that dramatically reduces intake air temperature (IAT), minimizes heat soak, and provides increased performance! The system is a direct bolt-on upgrade that requires no trimming and is recommended at every stage of performance. Quick Facts: Dramatically lowers intake air temp (IAT)-Increases horsepower while minimizing heat soak!-Effectiveness tested to over 500 HP!Massive core size-Use of the OEM-location allows for a massive intercooler core.-24.00" x 16.25" x 2.25" Intercooler installed in the best location for this platform-Utilizes factory air dams for exceptional airflow across the core.-100% compatible with the Adaptive Cruise Control (ACC) system. Highly effective core design-Bar-and-plate core with staggered and louvered fins.-Rigorous testing determined core style, fin density, and size.-Low pressure drop + highly effective cooling = high performance! Smooth cast end tanks-Engineered for low turbulence/restriction and maximum flow.-Organically shaped to promote airflow across entire core.No hidden labor costs or permanent modifications-No trimming, cutting, or other costly modification required.-No modification to the Adaptive Cruise Control System required. Designed by engineers with lasers-With the best equipment and smartest engineers, it just works!

Read more less

NOTE: We CANNOT Sell APR items outside of the United Kingdom!If this is ordered with a shipping address outside of the UK it will be removed from the order, refunded and other items shipped (if applicable) The APR Intercooler Hose System is a direct replacement upgrade, to the factory rubber hoses found on either side of the intercooler system.The system includes a multitude of enhancements designed for maximum performance, longevity and insurance against power robbing boost leaks.The system is fully compatible with the OEM and upgraded APR Intercooler system, OEM throttle body and all OEM turbochargers. Kit contents:* Intercooler Inlet Hose* Intercooler Outlet Hose* Hose Clamp SetSuitable for the following vehicles:* Audi A3 (8V) 1.8TFSI* Audi S3 (8V) 2.0TFSI* Audi TT Mk3 1.8TFSI* Audi TT Mk3 2.0TFSI* Audi TTS Mk3* Volkswagen Golf Mk7 GTI* Volkswagen Golf Mk7 'R'* SEAT Leon Mk3 1.8TFSI* SEAT Leon Mk3 Cupra (inc 280/290)* Skoda Octavia Mk3 vRS 2.0TFSI

Read more less

The APR Short Shifter System is a comprehensive upgrade to the factory gear shifter assembly and is designed to reduces shifter movement, in all directions, while simultaneously improving shift quality. The system provides fine tuning of front-to-back and side-to-side movements to shorten shifts, counterweight adjustments for enhanced shift quality, and upgrades the weak points of the factory setup to provide years worry free use. The upgrade is simple, easy to install, easy to adjust, and leaves the driver spending less time shifting, and more time accelerating to victory. To APR’s engineers, it’s the ultimate solution, but to the driver, it just works! Kit Contains: - Adjustable Short Shifter Lever- Adjustable Relay Shifter Lever

Read more less