30% OFF ALL REVO SOFTWARE IN MARCH. USE CODE *MODMARCH* AT CHECKOUT - INSTALL IN OUR BRADFORD HQ - click here

Revo Wheels

6 products

  • Revo RF018 Alloy Wheels - Fiesta Fitment (4x108 18 inch) - Car Enhancements UK

    Revo Revo RF018 Alloy Wheels - Fiesta Fitment (4x108 18 inch)

    REVO RF0 WHEELLIGHTWEIGHT. STRONG. FLOW FORMED.  OVERVIEW The RF0 wheel is a flow-formed alloy that's lightweight yet exceptionally strong, designed in-house at Revo HQ in the UK. Flow forming is one of the most advanced manufacturing technologies to enter the wheel industry. Flow Forming Technology involves the application of pressure to the inner barrel of the wheel while spinning and after it has been cast. This process stretches and compresses the aluminium, which increases tensile strength. In this respect, the process shares similar properties to those found in the forging process. The final product is lighter, stronger, has increased elongation, and much greater shock resistance as well as an increased load capacity over regular cast wheels. Whilst the RF0 wheel shares a similar design concept to our previous generation RV0, the more advanced manufacturing process offered through flow forming allows for more definition in the design, particularly noticeable in the spokes and rim edge fillets. By reducing the weight of your wheels 'unsprung weight' your suspension starts to have a much easier time. Each bump can be controlled more quickly and easily. This helps keep your tyre in contact with the road for longer, which is obviously great news for car control and braking. Reducing the 'rotational mass has its benefits too. A classic/timeless motorsport look featuring an embossed Revo logo and branded centre cap to compliment the subtle styling. Available in a choice of Gloss Black, Matte Bronze & Matte Anthracite. BENEFITS TÜV approved Flow formed manufactured Lightweight at only 8.85kg Fits Revo big brake kit* COLOUR OPTIONS Gloss Black Matte Bronze Matte Anthracite   FITTING      Manufacturer Model Variant Year Ford Fiesta MK8 EcoBoost 2017 Onwards Ford Fiesta MK8 ST 2018 Onwards Ford Focus Mk1 RS 2002-2003 Ford Focus Mk1 ST170 2002-2004   REVO BIG BRAKE KIT The RF0 range of wheels are lightweight and strong and give the car great look while still fitting with the Revo Big Brake Kit. The RF018 4x108 ET40 18" wheel will fit directly over the Revo 332mm Disc with 4pot monobloc calliper. NOTES Fitment table above is a guide, please check your vehicle for correct fitment. When using the RF019/018 wheels on track it is advised that you remove the centre caps from the wheel to avoid distortion due to excessive heat transfer Price includes x4 RF018 wheels, Tyres not included. © Revo

    £960.00

  • REVO RF018 WHEEL 18 X 8J, 5 X 112, ET40, CB 57.1MM - Car Enhancements UK

    Revo REVO RF018 WHEEL 18 X 8J, 5 X 112, ET40, CB 57.1MM

    REVO RF0 WHEELLIGHTWEIGHT. STRONG. FLOW FORMED.  OVERVIEW The RF0 wheel is a flow-formed alloy that's lightweight yet exceptionally strong, designed in-house at Revo HQ in the UK. Flow forming is one of the most advanced manufacturing technologies to enter the wheel industry. Flow Forming Technology involves the application of pressure to the inner barrel of the wheel while spinning and after it has been cast. This process stretches and compresses the aluminium, which increases tensile strength. In this respect, the process shares similar properties to those found in the forging process. The final product is lighter, stronger, has increased elongation, and much greater shock resistance as well as an increased load capacity over regular cast wheels. Whilst the RF0 wheel shares a similar design concept to our previous generation RV0, the more advanced manufacturing process offered through flow forming allows for more definition in the design, particularly noticeable in the spokes and rim edge fillets. By reducing the weight of your wheels 'unsprung weight' your suspension starts to have a much easier time. Each bump can be controlled more quickly and easily. This helps keep your tyre in contact with the road for longer, which is obviously great news for car control and braking. Reducing the 'rotational mass has its benefits too. A classic/timeless motorsport look featuring an embossed Revo logo and branded centre cap to compliment the subtle styling. Available in a choice of Gloss Black, Matte Bronze & Matte Anthracite. BENEFITS TÜV approved Flow formed manufactured Lightweight at only 8.85kg Fits Revo big brake kit* COLOUR OPTIONS Gloss Black Matte Bronze Matte Anthracite   FITTING     Manufacturer Model Variant Year Audi A3/S3/RS3 8P 2003 - 2012 Audi A3/S3/RS3 8V 2012 > Audi A4/S4 B5/6/7 1994 - 2011 Audi A6/S6 C5/6/7 1994 - 2011 Audi Q2 All 2016 > Audi Q3 All 2011 > Audi TT/TTS/TTRS 8J 2011 - 2013 Audi TT/TTS 8S 2014 > Seat Altea All 2010 > Seat Leon All 2010 > Skoda Karoq All 2017 > Skoda Octavia Mk2/3/4 2005 > Skoda Superb Mk2/3 2002 > VW Arteon All 2017 > VW Golf Mk5 All 2004 - 2009 VW Golf Mk6 All 2008 - 2012 VW Golf Mk7 All 2012 > VW Jetta All 2011 > VW Passat All 2005 > VW Scirocco All 2008 > VW Tiguan All 2007 >     REVO BIG BRAKE KIT The RF0 range of wheels are lightweight and strong and give the car great look while still fitting with the Revo Big Brake Kit. The RF018 5x112 ET40 18" wheel will fit directly over the 355mm Disc but will require a 10mm spacer and longer bolts when fitted with the larger 380mm disc. NOTES Fitment table above is a guide, please check your individual vehicle for correct fitment. When using the RF019/018 wheels on track it is advised that you remove the centre caps from the wheel to avoid distortion due to excessive heat transfer Price includes x4 RF018 wheels, Tyres not included. © Revo

    £1,166.40

  • RF019 WHEEL 19 X 8.5J, 5 X 108, ET45, CB 63.4MM - Car Enhancements UK

    Revo RF019 WHEEL 19 X 8.5J, 5 X 108, ET45, CB 63.4MM

    REVO RF0 WHEEL LIGHTWEIGHT. STRONG. FLOW FORMED.  OVERVIEW The RF0 wheel is a flow-formed alloy that's lightweight yet exceptionally strong, designed in-house at Revo HQ in the UK. Flow forming is one of the most advanced manufacturing technologies to enter the wheel industry. Flow Forming Technology involves the application of pressure to the inner barrel of the wheel while spinning and after it has been cast. This process stretches and compresses the aluminium, which increases tensile strength. In this respect, the process shares similar properties to those found in the forging process. The final product is lighter, stronger, has increased elongation, and much greater shock resistance as well as an increased load capacity over regular cast wheels. Whilst the RF0 wheel shares a similar design concept to our previous generation RV0, the more advanced manufacturing process offered through flow forming allows for more definition in the design, particularly noticeable in the spokes and rim edge fillets. By reducing the weight of your wheels 'unsprung weight' your suspension starts to have a much easier time. Each bump can be controlled more quickly and easily. This helps keep your tyre in contact with the road for longer, which is obviously great news for car control and braking. Reducing the 'rotational mass has its benefits too. A classic/timeless motorsport look featuring an embossed Revo logo and branded centre cap to compliment the subtle styling. Available in a choice of Gloss Black & Matte Anthracite. BENEFITS TÜV approved Flow formed manufactured Lightweight at only 10kg Fits Revo big brake kit* COLOUR OPTIONS Gloss Black Matte Anthracite   FITTING      Manufacturer Model Variant Year Ford Focus RS - MK2 2009 - 2010 Ford Focus ST - MK2 2006 - 2010 Ford Focus ST - MK3 2012 > Ford Focus RS - MK3 2016 > Ford Focus All 2004 > Ford CMAX All 2010 > Ford Kuga All 2008> Ford Mondeo All 2007 > Ford SMAX All 2006 >   REVO BIG BRAKE KIT The RF0 range of wheels are lightweight and strong and give the car great look while still fitting with the Revo Big Brake Kit. The RF019 5x108 ET45 19" wheel will fit directly over 380mm or 355mm Revo big brake kit with 6 pot monobloc calliper. NOTES Fitment table above is a guide, please check your individual vehicle for correct fitment. When using the RF019/018 wheels on track it is advised that you remove the centre caps from the wheel to avoid distortion due to excessive heat transfer Price includes x4 RF019 wheels & Wheel nuts, Tyres not included. © Revo

    £1,387.20

  • Revo RF019 19x8.5, 5x112, ET45, Audi, VW, Seat, Skoda fitment - Car Enhancements UK

    Revo Revo RF019 19x8.5, 5x112, ET45, Audi, VW, Seat, Skoda fitment

    Revo RF019 19 X 8.5, 5 X 112, ET45, 57.1mm CB Only 10kg per wheel TUV Approved Stunning Matt Anthracite Gloss Anthracite Made in UK by Team Dynamics 2 Year Warranty Designed to fit Revo Brake Kit without spacers 10 Spoke Motorsport design Revo Logo embossed on wheel with matching Revo centre cap Properly tested in house on road and track OVERVIEW The 19” cast alloy is a lightweight yet exceptionally strong wheel, designed in-house at Revo HQ and manufactured by OE Manufacturer and Motorsport specialist Rimstock making it a truly British product. Utilising the low pressure casting process used in the production of Rimstock’s tried-and-tested motorsport wheels, we were able to produce a timeless motorsport classic that could perform where it matters most; on the road. As with all Revo products, performance was a key factor in our design requirements. With an impressive weight of 10kg the RV019 is one of the lightest 19 x 8.5 cast wheels available, offering a huge reduction in unsprung mass over a factory wheel. The 10 spoke design not only looks great but is designed to clear your Revo big brake kit and offer more efficient cooling to the brake system than other wheel designs. On top of the performance and aesthetic qualities our RV019 also comes with full TÜV approval. With a classic motorsport look featuring an embossed Revo logo and branded centre cap to compliment the subtle styling, the wheel is available in a choice of Gloss or Matt Anthracite. FITTING Manufacturer Model Variant Year Audi A3/S3/RS3 8P 2003 - 2012 Audi A3/S3/RS3 8V 2012 > Audi A4/S4 B5/6/7 1994 - 2011 Audi A6/S6 C5/6/7 1994 - 2011 Audi Q2 All 2016 > Audi Q3 All 2011 > Audi TT/TTS/TTRS 8J 2011 - 2013 Audi TT/TTS 8S 2014 > Seat Altea All 2010 > Seat Leon All 2010 > Skoda Karoq All 2017 > Skoda Octavia Mk2/3/4 2005 > Skoda Superb Mk2/3 2002 > VW Arteon All 2017 > VW Golf Mk5 All 2004 - 2009 VW Golf Mk6 All 2008 - 2012 VW Golf Mk7 All 2012 > VW Jetta All 2011 > VW Passat All 2005 > VW Scirocco All 2008 > VW Tiguan All 2007 >  

    £1,387.20 - £1,435.20

  • RF019 WHEEL 19 X 8.5J, 5 X 112, ET45, CB 57.1MM - Car Enhancements UK

    Revo RF019 WHEEL 19 X 8.5J, 5 X 112, ET45, CB 57.1MM

    REVO RF0 WHEEL LIGHTWEIGHT. STRONG. FLOW FORMED.  OVERVIEW The RF0 wheel is a flow-formed alloy that's lightweight yet exceptionally strong, designed in-house at Revo HQ in the UK. Flow forming is one of the most advanced manufacturing technologies to enter the wheel industry. Flow Forming Technology involves the application of pressure to the inner barrel of the wheel while spinning and after it has been cast. This process stretches and compresses the aluminium, which increases tensile strength. In this respect, the process shares similar properties to those found in the forging process. The final product is lighter, stronger, has increased elongation, and much greater shock resistance as well as an increased load capacity over regular cast wheels. Whilst the RF0 wheel shares a similar design concept to our previous generation RV0, the more advanced manufacturing process offered through flow forming allows for more definition in the design, particularly noticeable in the spokes and rim edge fillets. By reducing the weight of your wheels 'unsprung weight' your suspension starts to have a much easier time. Each bump can be controlled more quickly and easily. This helps keep your tyre in contact with the road for longer, which is obviously great news for car control and braking. Reducing the 'rotational mass has its benefits too. A classic/timeless motorsport look featuring an embossed Revo logo and branded centre cap to compliment the subtle styling. Available in a choice of Gloss Black, Matte Bronze & Matte Anthracite. BENEFITS TÜV approved Flow formed manufactured Lightweight at only 10kg Fits Revo big brake kit* COLOUR OPTIONS Gloss Black Matte Bronze Matte Anthracite   FITTING   Manufacturer Model Variant Year Audi A3/S3/RS3 8P 2003 - 2012 Audi A3/S3/RS3 8V 2012 > Audi A4/S4 B5/6/7 1994 - 2011 Audi A6/S6 C5/6/7 1994 - 2011 Audi Q2 All 2016 > Audi Q3 All 2011 > Audi TT/TTS/TTRS 8J 2011 - 2013 Audi TT/TTS 8S 2014 > Seat Altea All 2010 > Seat Leon All 2010 > Skoda Karoq All 2017 > Skoda Octavia Mk2/3/4 2005 > Skoda Superb Mk2/3 2002 > VW Arteon All 2017 > VW Golf Mk5 All 2004 - 2009 VW Golf Mk6 All 2008 - 2012 VW Golf Mk7 All 2012 > VW Jetta All 2011 > VW Passat All 2005 > VW Scirocco All 2008 > VW Tiguan All 2007 >     REVO BIG BRAKE KIT The RF0 range of wheels are lightweight and strong and give the car great look while still fitting with the Revo Big Brake Kit. The RF019 5x112 ET45 19" wheel will fit directly over 380mm or 355mm Revo big brake kit with 6 pot monobloc calliper.      Notes: Fitment table above is a guide, please check your individual vehicle for correct fitment. When using the RF019/018 wheels on track it is advised that you remove the centre caps from the wheel to avoid distortion due to excessive heat transfer Price includes x4 RF019 wheels, Tyres not included. Before installation of any wheels please ensure that you have the correct bolt fitment with correct seating radius. Failure to do so could result in poor fitment and potential damage to your wheels. Audi TTRS Mk3 will require a spacer. Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

    £1,324.80

  • REVO RF020 WHEEL 20 X 8.5J, 5 X 112, ET45, CB 66.6MM - Car Enhancements UK

    Revo REVO RF020 WHEEL 20 X 8.5J, 5 X 112, ET45, CB 66.6MM

    REVO RF0 WHEEL LIGHTWEIGHT. STRONG. FLOW FORMED.  OVERVIEW The RF0 wheel is a flow-formed alloy that's lightweight yet exceptionally strong, designed in-house at Revo HQ in the UK. Flow forming is one of the most advanced manufacturing technologies to enter the wheel industry. Flow Forming Technology involves the application of pressure to the inner barrel of the wheel while spinning and after it has been cast. This process stretches and compresses the aluminium, which increases tensile strength. In this respect, the process shares similar properties to those found in the forging process. The final product is lighter, stronger, has increased elongation, and much greater shock resistance as well as an increased load capacity over regular cast wheels. Whilst the RF0 wheel shares a similar design concept to our previous generation RV0, the more advanced manufacturing process offered through flow forming allows for more definition in the design, particularly noticeable in the spokes and rim edge fillets. By reducing the weight of your wheels 'unsprung weight' your suspension starts to have a much easier time. Each bump can be controlled more quickly and easily. This helps keep your tyre in contact with the road for longer, which is obviously great news for car control and braking. Reducing the 'rotational mass has its benefits too. A classic/timeless motorsport look featuring an embossed Revo logo and branded centre cap to compliment the subtle styling. Available in a choice of Hyper Silver, Gloss Black, Matte Bronze & Matte Anthracite. BENEFITS Flow formed manufactured Lightweight under 12kg Fits Revo big brake kit* COLOUR OPTIONS Gloss Black Matte Bronze Matte Anthracite Hyper Silver   FITTING  RF020 Wheel 20 x 8.5j, 5 x 112, ET45, CB 66.6mm – The below fitments will require a 66.6mm to 57.mm spigot ring which is included with this wheel size. Manufacturer Model Variant Year Audi A3 / S3 / RS3  All 2012 > Audi TT / TTS /TT RS All 2014 > Audi A4/A5/A6/A7 5 All 2007 > Seat Leon All 2012 > Skoda Octavia All 2014 > VW Golf All 2014 > VW Golf GTI / R All 2014 > VW Beetle All 2011 > VW Caddy All 2003 > VW Passat All 2015 > VW Tiguan All 2016 >   REVO BIG BRAKE KIT The RF020 wheels were also designed to fit with all Revo brake kits without the need for spacers.     Notes: The fitment table above is a guide, please check your individual vehicle for correct fitment. When using the RF0 wheels on track it is advised that you remove the centre caps from the wheel to avoid distortion due to excessive heat transfer Price includes x1 RF020 wheel, Tyres not included. Before installation of any wheels please ensure that you have the correct bolt fitment with the correct seating radius. Failure to do so could result in poor fitment and potential damage to your wheels. No Spigot ring is needed for this vehicle.  Please contact your local Revo Authorised Dealer for additional information and availability.

    £1,536.00 - £1,584.00

Revo Wheels

Login

Forgot your password?

Don't have an account yet?
Create account