Performance - Ford Focus MK4 (2018-Present)

Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates. Best quality guaranteed!

Read more less

 Visibility in your boot absolutely shocking? Constantly cursing your vehicle manufacturer for giving you just ONE boot light? We have the solution for you! Description Utilising our SMD Panel upgrades we have created a solution to the poor visibility found in the boots of most of todays hot hatch's. Simply extending your existing fittings and using all your OEM plugs and sockets, zero splicing and hard wiring required this kit can be installed in under 5 minutes. Featuring a 501 AND a Festoon socket, the kit plugs into your existing boot light socket, with a splitter and extension, allowing light at both sides of your boot. Whats In the Box? 501 Adapter Festoon Adapter 2x SMD Panels (in a choice of 6 colours) 1x Wiring Loom Instructions Fitting The kit will fit any vehicle with a 501 or festoon Boot light fitting! The kit can be fitted in under 5 minutes following our instructions, and requires simply a small flat head screw driver Wiring Loom The wiring loom of this kit receives a lifetime warranty LED Panels The LED Panels in this kit receive a 12 month warranty, being a perishable item! Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Your chance to represent the fact that you have been #Enhanced by us! Top quality premium grade gel badges to go anywhere on your car; either under the engine bay, on a window.. Or maybe even on your tail gate! In a choice of multiple colours (please see options) Show everyone your proud to be running the best Car Enhancements around, and that you too... Are #Enhanced

Read more less

Upgrade poly exhaust mount - reduces flexibility and swinging of exhaust stronger than existing oem bushes Price is for One Item FITS: Citroen AX Mk1 & 2 (1986-1998), Citroen Saxo inc VTS/VTR (1996-2003), Mazda Mk1 NA (1989-1998), Mazda Mk2 NB (1998-2005), Peugeot 106 (1991-2003), Peugeot 205 GTi (1985-1998), Peugeot 309 inc GTI (1985-1994) Honda Civic Mk5 EG-EJ inc CRX del Sol (1991-1995), Honda Integra Mk3 DB/DC2 inc. Type-R (1993-2001) Ford Fiesta MK8 (2017 - ON), Ford Fiesta MK8 ST 200 (2017 - ON), Ford Fiesta MK8.5 ST 200 Facelift (2021 on), Ford Focus MK2 RS (2005-2010), Ford Focus MK2 ST (2005-2010) Ford Fiesta Mk7 Facelift Incl. ST (2012 - 2017) AND MORE

Read more less

#Enhance the entrance of your vehicle with this fantastic product! All new Black Brushed stainless steel design for better durability and a massive improvement on quality! Now wireless, can fit ANY vehicle! We give you, The #Enhanced Illuminated Sill Protectors - ST Spec In a Stunning Red colour, you can truly give your Car not only what it deserves, But the one thing it is missing! What's in the kit? 2x Illuminated Door Sill Protectors with specified design Fitting Kit How does it work? Simply stick the wireless sill in place and attach the supplied magnet in place, when your door opens and moves the magnet - the light activates for 30 seconds giving you amazement. After 30 seconds, or the door closing (which ever happens first) the light will go off, until the door is opened again! Sizing: Wireless: 47cm long x 5cm deep x 1cm tall Why CEUK? Our aim is and has always been to bring you the best possible products to #Enhance your vehicle, and this is another step in the right direction! Modify your ride the #Enhanced way! Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.

Read more less

The official CEUK workshop logo is now available as an air freshener. Show your support for the brand with an added bit of style! These are dipped, as opposed to sprayed meaning the scent is a lot more potent and lasts 5x longer than most commercial air fresheners on the market today. The scents are heavenly! scents selected at random. current scents are bubblegum or black cherry 

Read more less

All the colours of the rainbow - at once!   Description You've seen our chaser halos, but what about our chaser grilles? This fully independent and self serving kit allows you to install an LED strip behind your grille and use your phone to choose from any colour you want - or several at the same time. Fully plug and play and easily installed this kit has a far superior output to any other grille light kit, Providing both stylish looks and excellent performance. Whats in the Kit? 1x Bluetooth Receiver 1x Power wiring loom with inline 3amp fuse 2 LED Strips (60cm per strip) 1x Fitting Kit Instructions Fitting The kit is very easily installed, taking power from your car battery and fully controlled by your mobile phone. The LED strip is provided with an amount of self adhesive clips which can be used to place your LED strip behind the grille, alternatively you can use a form of adhesive to secure in place, EG Tiger Seal (Not provided)   Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description #Enhanced Edition 501A LED Mirror Indicator / Side Repeater Bulb - Canbus Friendly To work as part of a set with our Enhanced Edition 581 Indicator Unit These LED Indicator Bulbs produce a bright orange light as well as enhancing the overall look of the vehicle by producing a strong light output of upto 7x as bright. With 52 LED's PER BULB These are sure to Enhance Your ride! Whats in The box? 2x 501A LED Side Repeater Bulbs Specification: 501A Fitment Long Lasting LED's Ultra Bright all round light output Canbus error free Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.   Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Fits: Kuga 09/2016 – 11/2019 Manual transmission Fiesta-ST 07/2017 – Manual transmission Fiesta 07/2017 – Manual transmission EcoSport 10/2017 – Manual transmission Focus-ST 04/2018 – Manual transmission Focus-ST 04/2012 – Manual transmission Focus 04/2018 – Manual transmission with red ST logo or plain Carbon fibre gear shift knob with 6-speed gear shift pattern. Ford recommends that you use a qualified technician to fit parts. Damage owing to incorrect fitment is not covered under warranty. Spice up the interior of your Ford with this racing-inspired authentic Ford Performance shift knob.

Read more less

This soft, stretch fit steering wheel cover for Disklok will help prevent lay marks and scratches on soft leather wheels. Extremely easy to fit to the wheel and easily stored inside your Disklok when not in use. One size fits all steering wheels 30 – 45cm in diameter.

Read more less

Add some colour to the interior to the B&o speaker grill with these gel badge covers! 3 x 15mm B&o gel stickers to cover the three front speakers (front, left & centre speaker) Set only comes as one single colour with a black "B&o" logo. (Dark colours will have a light grey logo). Mix & Match not available on this product Fits the following: Mk8 Fiesta Mk4 Focus Mk3 Kuga 2020 Puma This will also fit other new generation fords that use this same type of speaker grill. Please measure before purchasing This will not fit vehicles without the B&o speaker upgrade. Please see our other product for standard speakers

Read more less

The All new Enhanced Edition sequential indicator unit from CEUK for the MK4 Focus A fine complement for our LED front and rear indicator offerings  Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit! Amber sequential strobing that is completely canbus friendly!  Designed in house by the team at CEUK you will not find these anywhere else at present!  Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.

Read more less

Add a bit of Bling to your smelly interior Official CEUK air freshener which can be hung from your mirror or indicator stalk  featuring the CEUK logo front and rear Bubble-gum flavour - these are the absolute bomb! Dipped instead of sprayed the smell lasts! 

Read more less

AIRTEC Motorsport Weighted Gear Knob. In a black finish, with your choice of colour ring, finished with the AIRTEC Motorsport logo. Designed to enhance your driving experience and improve the looks of your interior. TECHNICAL DATA AIRTEC Motorsport Weighted Gear Knob. In a black finish, with your choice of colour ring, finished with the AIRTEC Motorsport logo. Designed to enhance your driving experience and improve the looks of your interior. The aluminium gear knob is finished in AIRTEC’s Pro-Series Black hard anodised finish with etched logo, offers a smart and slick look. Designed as a direct screw on replacement of the factory knob, whilst still retaining the reverse gear shift interlock feature. The black top is separated by a coloured ring, available in Red, Blue, Green, Yellow or white. Features: High quality hard anodised finish in Pro-Series Black Laser etched AIRTEC motorsport logo Choice of red, blue, green, yellow or white ring Direct replacement of the OEM part Will fit the following: Fiesta MK7 (ST) Fiesta MK8 (ST) Focus MK3 ST & RS MMT6 & IB5+ AIRTEC Part No: ATMSGK01

Read more less

Carbon Gel Overlay for Card Slot Will not fit all models, please check your car model before purchasing Currently tested on Automatic ST-Line Model & Mk8 Fiesta   Please note: most PP&S badges / decals are made to order - Once shipped it will be via tracked24 however please allow 3-5 days for these to be made prior to dispatch

Read more less

Here we have a full replacement LED puddle unit for the MK4/ MK4.5 Focus ST (all models)   The unit contains a mini projector which projects a Red “ST” Logo on to the pavement!   Direct plug and play replacement, no cutting or drilling   Fits Petrol & Diesel ST Models - Made in house from scratch by CEUK, a True world first that is actually correct Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.  

Read more less

Introducing our brand new CEUK logo “Best of British” sticker Traditional CEUK logo complete with Union Jack background in celebration of the great country we live in and where the vast majority of our products are made!

Read more less

Carbon Fibre effect vinyl gel designed to cover over the complete control area of the headlight control panel of the Mk8 Fiesta & Mjk4 Focus (and other models using the same panel) Please note that extra care should be taken when handling this product as the item could become stretched out of shape if pulled too heavily   *** Click here to see our colour guide ***   Please note that there is an addtional 2 days lead time for gel products  Please note: most PP&S badges / decals are made to order - Once shipped it will be via tracked24 however please allow 3-5 days for these to be made prior to dispatch This product design is protected by the Intellectual Property Office. Registration no: Pending

Read more less

Here we have a Genuine Carbon Fibre gear knob for most ford models 2009 onward. Constructed from full Carbon Fibre, with the Gears 1-6 and R printed on as well as the Red ST logo then coated in a thick clear coat to protect from damage! Simple install, unscrew old know and install this one. Unfortunately the pattern of the gears cant be changed, so whilst this item may fit your vehicle the pattern of the numbers may differ to the location of the gears on your vehicle (MK8 1.0 etc)  Please note: Whilst this is genuine carbon, This is not the genuine ford part - if you would like the genuine ford part please search code 2215799 in the search bar

Read more less

Full set of cup holder inserts for the MK4 Focus NOT SUITABLE FOR AUTOMATIC WITH ROUND HOLDERS Fits all models pictured cup holder design! Available in Clear or Black Plate (Clear allows the existing lights to light up the insert, looks really nice!) ST Line or ST logo available in a choice of colours One solid piece with 2 logos, can easily be removed to access hidden pocket Simply sit in your cup holders, no adhesive needed! Note: Light is not provided, this may be standard in your vehicle! Please note: These come in separate pieces for self application to have the logo where you want it! CECHB6 - 75x200

Read more less

Official Merchandise from CEUK has once again Brough a new hoodie This time in the form of a Black soft style hoodie featuring the iconic ceuk workshop logo on the front left chest and an oversize rear!  Providing pure comfort and style, show your support and look great at the same time Also added option for the workshop top too at a discounted price! why not?!?     

Read more less

3 Piece trim removal tool kit. Ideal for those little jobs, We use these for installing sequential indicators and fog light guards as they work great at removing mirror caps and fog surrounds All 3 tools are the same size with 1 narrow end.

Read more less

Genuine Ford Performance Blue Touch Up Pen  For the MK8 Fiesta ST and MK4 Focus ST - this kit includes 1x Performance Blue and 1x Clear Coat Called a touch up pen however this is a small bottle with a brush on the lid!

Read more less

Replace your Awful Chrome and Red ST badges with our full 4D Replacement's Made from Premium 3mm Acrylic (6mm total with 2 colours) these come with 3M Tape already applied to stick straight on in place of your existing badges! Using the latest in Laser technology, these badges are cut with a smooth edge for a perfect finish! And using 3M's best Out door tape, which gets stronger in adverse weather conditions guaranteeing you will never lose them! Create your own look, with ANY colour Backing and Front to give you a truly Unique experience! The price shown is for 1 Pair (1 Front Small and 1 Rear Large) This is NOT a Gel Inlay - Your OEM Badges will need to be removed

Read more less