30% OFF ALL REVO SOFTWARE IN MARCH. USE CODE *MODMARCH* AT CHECKOUT - INSTALL IN OUR BRADFORD HQ - click here

Turbos

30 products

  • AIRTEC Motorsport Fiesta ST180 turbo induction elbow - Car Enhancements UK

    Airtec AIRTEC Motorsport Fiesta ST180 turbo induction elbow

    AIRTEC Motorsport turbo induction elbow for Fiesta ST 180. Direct replacement of the stock turbo induction pipe which has a very small internal diameter. Only company supplying with a gasket, to prevent any air leaks or engine management lights. Features: 10mm larger internal diameter than stock Direct replacement Enhanced induction noise Increased flow for more power Fits standard turbo and all hybrid turbos with original turbo housing Optional extra Pro Hose

    £121.51 - £139.66

  • AIRTEC MOTORSPORT ENLARGED TURBO ELBOW FOR FIESTA ST 180 - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT ENLARGED TURBO ELBOW FOR FIESTA ST 180

    We’ve developed another solution to our popular enlarged turbo elbow for the Fiesta ST180. This new design features a bespoke one-piece silicone connector to directly replace the original plastic item, or as an alternative to our enlarged alloy design. AIRTEC part number: ATMSFO121   TECHNICAL DATA AIRTEC Motorsport Enlarged Turbo Elbow for Fiesta ST180 in Silicone We’ve developed another solution to our popular enlarged turbo elbow for the Fiesta ST180. This new design features a bespoke one-piece silicone connector to directly replace the original plastic item, or as an alternative to our enlarged alloy design. The internal dimeter of the new Pro Hoses silicone hose measures 70mm from start to finish, offering uninterrupted flow throughout, compared to other enlarged elbow pipes on the market and is a vast improvement over Ford’s restrictive design. This solution also fits in place using a two-piece threaded adapter, which bolts to the flange as usual and then allows the new enlarged inlet pipe to easily tighten into place. This design feature means fitting becomes a much easier and simpler process, and is unlike any other on the market. Features: Direct replacement Enhanced induction noise Improves response and increases performance 70mm continuous internal diameter 10mm larger than original Ford hose Easy fit two-piece threaded adaptor Includes new gasket & fitting kit Fits standard and hybrid turbos   Registered Design Right: AIRTEC part number: ATMSFO121

    £104.69

  • REVO 2.0 TSI EA888 TRANSVERSE K04 TURBOCHARGER SYSTEM EXC. SOFTWARE - Car Enhancements UK

    Revo REVO 2.0 TSI EA888 TRANSVERSE K04 TURBOCHARGER SYSTEM EXC. SOFTWARE

    The Revo 2.0TSI Stage 3 Turbo kit combined with Revo Stage 3 software can give up to 164bhp and 215Nm peak increases over standard quoted figures with smooth power delivery and excellent drivability. With the larger turbo-charger and supporting Stage3 software, the 2.0TSI engine is given an entirely new lease of life, seeing over 360 bhp and 360 lbft along with increases throughout the rev-range making for not just a powerful car but a true all-round performance car. Whether you have a 2.0TSI Gti, LeonFR, Scirocco, or even a VW Tiguan a Revo Stage3 package will give you an incredibly capable and rewarding vehicle to drive. The hoses themselves have been made with stepped necks so the transition of airflow is smooth throughout the system, the intake hose on the TSI and has been designed so that you can reduce the neck size to accommodate the factory intake set up or an aftermarket intake with 3 varying reducers. The diverter valve relocation features a one-piece machined housing for the OE part to bolt to and then connect to the new silicone hoses. BENEFITS +360 BHP +360 lbftTorque Genuine Borg Warner Turbo Stepped Silicone Hoses Smooth Power Delivery   REVO QUALITY The Borg-Warner turbo has been modified to Revos’ exact standards and features a set of custom silicone hoses which relocates the factory diverter valve. The Revo Borg Warner K04 - 0064 benefits from a redesigned outlet that not only removes the OEM resonator but increases airflow, as with all Revo products the quality of the work is second to none. Our comparison images show the quality/ superiority over competitor K04 turbos on the market. The kit comes complete with all new gaskets, bolts and fittings required for simple installation.   POWER & TORQUE   Power (BHP) Power (kW) Torque (lbft) Torque (Nm) OEM Stock 200 / 207 / 211 149 / 154 / 157 207 280 Revo Stage 3 364 271 365 495   SEE IT IN ACTION     Notes: Recommended Revo Authorised Dealrf Fitment only Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

    £1,854.00

  • IS38ETR V2 | ENHANCED TURBO UPGRADE - Car Enhancements UK

    Revo IS38ETR V2 | ENHANCED TURBO UPGRADE

    REVO IS38ETR V2 TURBO 2.0 TSI EA888 GEN3 The next generation of Revo IS38ETR Enhanced Turbo offers even more exhilarating performance than before. Revo offers a reliable package capable of over 500HP without the need to upgrade engine internals or DSG clutches. Whilst also focusing on the driveability and feel of the vehicle, on-road or the track. Only Revo Enhanced Turbos are specifically designed to work in harmony with your vehicle and Revo Software. Engineered to directly replace the stock turbo, the Revo IS38ETR is a high-quality upgrade, precision balanced to motorsport tolerances to improve performance and ensure reliability. KEY FEATURES Capable of 500HP + Custom designed compressor and turbine wheels 360º thrust bearing kit with custom direct oil-fed pads Precision balanced to motorsport specification Designed in harmony with Revo Software   DIRECT REPLACEMENT A direct replacement for the IHI Turbo found on 2.0 TSI EA888 GEN3 engines, the IS38ETR is an enhanced version of the OEM IS38, with increased airflow from the re-profiled housing and larger compressor and turbine wheels. Revo Hardware and Software is key to achieving this performance and have been developed to work in harmony with the ETR upgrade. TURBO FEATURES The high-performance Revo IS38ETR offers a significant upgrade over the stock IS38 whilst maintaining the original fitment and compressor and turbine housings. The compressor and turbine housings have been CNC re-profiled to match the custom-designed larger wheels and stronger shaft. Strength is a key factor to the IS38ETR, a replacement back-plate machined from a single billet piece offers greater resistance to warping, while the increased diameter shaft eliminates the weakness in the OE part.   COMPRESSOR WHEEL The larger compressor wheel has been machined from a solid billet of aluminium giving a much stronger construction. The new custom design gives the highest level of aero performance, providing superior flow characteristics to achieve the required boost levels with less effect. The lightweight construction of the compressor wheel also ensures low inertia, resulting in increased performance.   TURBINE WHEEL The precisely engineered turbine wheel has been made with a custom high flow aero blade profile to compliment the aero of the compressor wheel. The result is an extremely high flow aero turbine wheel which increases exhaust gas choke flow limits and reduces backpressure.   HOUSING AND BEARINGS The bearing housing has also been enlarged and upgraded to make room for a specifically designed 360° thrust bearing system, incorporating a custom 4 oil-fed thrust pad for increased reliability. Precision VSR balanced to levels above the OEM specification, something seen in the motorsport industry. This reduces vibration to the lowest possible level and improves the performance and reliability of the turbocharger. INTEGRATED RECIRCULATING SYSTEM The integrated recirculation valve is fundamentally a blow-off valve integrated into the compressor housing. When the throttle valve is closed and the pressure in the inlet drops, the valve opens and air from the discharge side of the compressor is diverted back into the inlet of the compressor. This helps to avoid the compressor going into surge.   TURBO MUFFLER DELETE The Revo Turbo Muffler Delete offers a high-quality single piece replacement for the OEM part which allows for smoother uninterrupted airflow, increasing throttle response and providing improved turbo acoustics. Its single-piece design allows air a more direct path when exiting the turbo, smoothing flow to offer enhanced throttle and boost response.   RESEARCH AND DEVELOPMENT Utilising decades of experience in software calibration and precision turbo engineering, Revo is proud to offer a package that provides the performance you demand and the reliability you expect. The IS38ETR forms one part of this package; with all available Revo hardware and software having been designed and tested to work in harmony to achieve exhilarating performance that only the driven demand; the result of extensive development, testing and prototyping programme. The aim from the outset was to achieve a balance of top-end power and bottom-end response, without having to forge internals. Combining extensive turbocharger manufacture experience with Revo’s industry-leading ECU calibration and hardware design, we have been able to achieve incredible performance results without compromising on component reliability or engine longevity. DYNO GRAPH Dyno testing was carried on our inhouse DynaPack chassis dynamometer, which measures performance at the wheel hubs, for comparisons between a Stock VW Golf R with IS38 Turbo and the same vehicle fitted with a full Revo performance Pack and IS38ETR turbo. Stock Golf R Peak performance: 283HP / 379NM (HP at the hubs) IS38 ETR Peak performance:: 457HP / 567NM (HP at the hubs) Peak Gains: +174HP / +188NM Max Gains Over Stock: +183HP @ 6500RPM / +188NM @ 4600RPM   FITMENT VEHICLE APPLICATIONS2 Manufacturer Model Engine Year Audi S3 2.0 TSI 300PS 2014-2017 Audi S3 2.0 TSI 310PS 2017-2019 Audi TT/TTS 2.0 TSI 2014-2018 SEAT Leon 2.0 TSI 2014-2018 Skoda Octavia 2.0 TSI 2014-2018 VW Golf GTI 2.0 TSI 2014-2017 VW Golf R 2.0 TSI 300PS 2014-2017 VW Golf R 2.0 TSI 310PS 2017-2019   Notes: Revo Authorised Dealer fitment only Software availability to support this turbo is ECU ID dependant IS38ETR upgrade is not currently supported on GPF/OPF equipped vehicles Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

    £3,757.20

  • PRO HOSES TURBO TO INTAKE HOSE FOR EA888 2.0 TSI - Car Enhancements UK

    Pro PRO HOSES TURBO TO INTAKE HOSE FOR EA888 2.0 TSI

    TECHNICAL DATA Pro Hoses Turbo to Intake hose for EA888 2.0 TSI MQB engine. Designed to replace the stock induction hose and turbo elbow on the 1.8 and 2.0 TSI engines with the IHI turbo. A single hoses with CNC connector to fit directly to the turbo, which allows for a smother airflow, improving throttle response and an increase of power. The Pro Hoses machined CNC connector replaces the restrictive OEM part using the twist and lock tabs with supplied O-rings. Larger diameter intake hose which runs from the airbox to the turbo allows for maximum air flow, and can be fitted to vehicles running the stock air box. Part Number: PH/INDVAG8

    £189.55 - £196.83

  • Turbo Blanket For Subaru - Car Enhancements UK

    forge Motorsport Turbo Blanket For Subaru

    The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by your turbocharger. This design has been created to withstand the harshest of environments. The Forge turbo blanket is designed to assist in the protection and prolonging of your engine components and its unique design will assist in reducing turbo lag and produce cooler air intake temperatures, You will find that the Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. Stainless Steel Rivets Stainless Steel Fasteners Carbon fabric Outer Shell Calcium Magnesium Silicate Wool constructed Inner Core High temperature silica fabric   This product fits the Subaru models below: 2002 - 2005 Subaru Impreza WRX 2.0L 2006 - 2011 Subaru Impreza WRX 2.5L 2004 - 2011 Subaru Forester 2.5L 2005 - 2009 Subaru Legacy 2.5L   This product has also been fitted to a Subaru fitted with a VF43 turbo Interior Surface: ·       Max Temperature Rating: 2300°F/1260°C·       Continuous Use Limit: 1832°F1000°C Exterior Surface: ·       Direct Contact Limit: 1800°F/982°C·       Radiant Heat Limit: 2500°F/1371°C   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £87.53

  • Alloy Adjustable Actuator for Subaru Legacy BP/BL VF45 - Car Enhancements UK

    forge Motorsport Alloy Adjustable Actuator for Subaru Legacy BP/BL VF45

    Alloy Adjustable Actuator for Subaru Legacy BP/BL VF45. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACSUB6 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £198.74

  • Adjustable Actuator for Subaru IHI VF24 Turbo - Car Enhancements UK

    forge Motorsport Adjustable Actuator for Subaru IHI VF24 Turbo

    Adjustable Actuator for Subaru IHI VF24 Turbo. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMAC3SUB Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £198.74

  • Adjustable Actuator for Subaru IHI VF36/VF37 Turbo GDB Spec C - Car Enhancements UK

    forge Motorsport Adjustable Actuator for Subaru IHI VF36/VF37 Turbo GDB Spec C

    Adjustable Actuator for the Subaru IHI VF36/VF37 Turbo - GDB Spec C Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMAC1SUB Actuator1 x Forge Sticker This actuator is built with a green coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £198.74

  • Adjustable Actuator for Subaru IHI VF35/VF34 Turbo GDB - Car Enhancements UK

    forge Motorsport Adjustable Actuator for Subaru IHI VF35/VF34 Turbo GDB

    Adjustable Actuator for Subaru IHI VF35/VF34 Turbo GDB - However, this is not suitable for spec C. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMAC2SUB Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £198.74

  • Adjustable Diaphragm Actuator for Subaru TD04/TD05 Turbochargers - Car Enhancements UK

    forge Motorsport Adjustable Diaphragm Actuator for Subaru TD04/TD05 Turbochargers

    Adjustable Actuator for Subaru TD04/TD05 Turbochargers. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMAC4SUB Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £198.74

  • Saab 95 2.0T 2.3T and 93 2.0T Adjustable Actuator - Car Enhancements UK

    forge Motorsport Saab 95 2.0T 2.3T and 93 2.0T Adjustable Actuator

    Saab 95 2.0T 2.3T and 93 2.0T Adjustable Actuator. This actuator is designed for the SAAB9-5 2.0T / 2.3T 98 to 05 and 9-3 2.0T 00 to 02. (This is not suitable for Aero models) Manufactured from Billet aluminium, this Forge adjustable actuator is a two part assembly that will allow servicing and mainteinance. It also allows for rod adjustment to suit the customers individual application. Laser cut stainless steel brackets ensure OEM like fitment. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMAC95932 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £133.35

Login

Forgot your password?

Don't have an account yet?
Create account