Performance - Mercedes G Class (W460 / W461) 1979-1992

Custom Car Number Plate Keyring – Personalised Reg Plate Keyring for Car Enthusiasts Add a personal touch to your keys with our Custom Number Plate Keyring, designed to replicate your actual car registration plate. Whether you're a proud car owner, collector, or just love a bit of custom flair, this keyring is the perfect accessory to show off your pride and joy. ✅ Customisable with your exact number plate✅ Durable Dual Layer 6mm acrylic construction✅ Colour Customisable for maximum visibility✅ Ideal gift for car lovers, new drivers or clubs✅ Lightweight yet strong – built to last Why choose our number plate keyring? Each keyring is made to order using high-quality materials that ensure long-lasting colour and detail. It’s lightweight enough for everyday use, yet tough enough to handle daily wear and tear. The miniature plate design mirrors UK registration plates, giving it a premium and authentic look. Choose whatever colour Face plate and back plate you want to give you a truly customised look. Perfect for: Personal use Gifts for new car owners Car club merchandise Show & shine accessories  

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Custom 4D Number Plate Tags – Pair | Fully Legal | Any Colour & Logo Add a bold, custom touch to your UK number plates with our CEUK 4D Number Plate Tags – fully road legal and made to match or enhance your 4D plates. These are not just stickers – they’re premium, 3mm acrylic tags with a raised 4D effect, available in any colour and logo combination you choose. Designed to stick to the left side of your number plate using weatherproof backing tape, these tags offer a fully customisable and stylish upgrade that complies with UK number plate regulations. ✅ Key Features: Sold as a Pair – includes 2x matching tags 100% Road Legal – 50mm wide to comply with DVLA size regulations Fully Customisable:• Choose tag colour• Choose logo/emblem• Choose logo orientation• Choose logo colour Weatherproof & Durable – designed to last in UK conditions Easy Fit – pre-applied adhesive for quick install 🛠️ Size Options: Option 1 – Standard Plates (No Frame): • H 110mm x W 50mm x T 3mm• Designed to fully cover the corner of any number plate without a frame Option 2 – Plates with Surround Frame: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit inside plate frames (may leave a small border) 💡 Note: Fit may vary slightly due to universal design. See product images for visual examples. Looking for something completely custom? Contact us at support@ceuk.org and our in-house design team will be happy to help you create a truly unique tag!

Read more less

Custom 4D Number Plate Tags – Fully Legal Acrylic Pair | Multiple Colours & Logos Take your number plate styling to the next level with CEUK’s Custom 4D Number Plate Tags – designed to perfectly complement 4D number plates, but also compatible with any standard UK number plate. Crafted from 3mm premium acrylic, these tags are 100% road legal at just 50mm wide, and adhere easily to the left-hand side of your plate using pre-applied, weatherproof adhesive backing. Sold as a pair (2 tags), each set is fully customisable to match your build’s style. 🎨 Customisation Options: Choose your tag colour Choose your logo or emblem Choose the logo orientation Choose the logo colour 📏 Size Options: Option 1 – For Plates Without Frames: • H 110mm x W 50mm x T 3mm• Designed to fully cover the plate’s left edge — ideal for plates fitted directly to the car. Option 2 – For Plates With Surround/Holder: • H 100mm x W 47mm x T 3mm• Slightly smaller to fit cleanly within most number plate holders (see sizing disclaimer below). ✅ Key Features: Sold as a pair (2 tags included) Legal under UK number plate regulations Premium laser-cut acrylic (3mm thick) Weatherproof adhesive – pre-applied for easy install Designed and made in the UK by CEUK Perfect for adding personal or branded touches to your plate setup ⚠️ Disclaimer: Full-size tag (Option 1) is universal and may slightly overlap corners depending on plate shape — designed to fully cover edge areas. Smaller tag (Option 2) may leave a 1–2mm border between the tag and frame depending on your holder’s dimensions. 📩 Want Something Completely Custom? No problem — just email support@ceuk.org, and our design team will help bring your idea to life.

Read more less

Enhanced Edition H7 Mini LED Bulbs – Ultra Compact, 6000Lm Output (6000K Ice White) All the power of our popular V3 LED Bulb – in a compact, low-profile design.Introducing the Enhanced Edition H7 Mini, designed to deliver exceptional brightness and clarity while eliminating the bulk of traditional LED upgrades. This is the perfect solution for tight-fit housings or vehicles with limited rear clearance. Ideal for dipped beam, high beam, or fog light applications, the H7 Mini fits any vehicle using a standard H7 fitting – no adapters, clips, or caps required. 💡 Why Choose the H7 Mini? Massive 6000Lm per bulb output – crisp 6000K Ice White Micro-sized cooling fan built into the shaft – no bulky heat sink Zero polarity issues – 4-point design works in multiple orientations Plug & Play Installation – fits directly into H7 sockets with no mods Compatible with projector and reflector housings ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K (Ice White) Lumen Output: 6000Lm per bulb Fitment: H7 (replaces OEM halogen) 📦 What's in the Box: 2x H7 Mini Enhanced Edition LED Bulbs Default colour: 6000K Ice White Supplied with 12-month CEUK warranty (keep packaging if longer warranty is stated) ⚠️ Vehicle Fitment Note: While this bulb fits all standard H7 sockets, spec-level variants (e.g. Ford ST, VW GTI) may use different housings. Please confirm bulb type before ordering by checking your existing unit. Installing LEDs may trigger a dashboard bulb error on some vehicles. This is harmless and explained in our FAQs.

Read more less

Enhanced Edition H8/H11 Mini LED Bulbs – Ultra Bright, Compact Fit (6000K Ice White, 6000Lm) All the power of our V3 LED bulb – in a sleek, compact design.Introducing the CEUK Enhanced Edition H8/H11 Mini LED Bulbs, engineered for maximum output and perfect fitment in tight headlight or fog light housings. These bulbs deliver a massive 6000Lm per bulb and feature a compact heat management system – ideal for modern vehicles where space is limited. Compatible with H8 and H11 fitments, these bulbs are perfect for fog lights, dipped beams, or high beam upgrades, delivering clear, crisp 6000K Ice White light with superior reliability. 💡 Key Features: 6000Lm Output Per Bulb – 6x brighter than most OEM halogens Ultra-Compact Design – mini cooling fan built into the shaft, no bulky heat sink Plug & Play Fitment – no adapters, clips, or caps needed 12V, 28W Power Efficiency Zero Polarity Issues – works in any orientation Suitable for Projector & Reflector Housings Safe for OEM Components – no CANBUS interference on most vehicles ⚙️ Technical Specs: Voltage: 12V Wattage: 28W LED Chip: 3570 Colour Temperature: 6000K Ice White Lumen Output: 6000Lm per bulb Fitment: H8 / H11 📦 What’s in the Box: 2x H8/H11 Enhanced Edition LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (retain packaging if warranty is extended) ⚠️ Fitment Note: Always double-check your vehicle's bulb type – special editions (e.g., Ford ST, VW GTI) may differ from standard specs. Some vehicles may display a dashboard error message when LEDs are installed – this is harmless and addressed in our FAQs.

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Enhanced Edition H1 LED Headlight Bulbs – 6000K Ice White | 20,000Lm | Direct Fit Experience unmatched brightness and clarity with the CEUK Enhanced Edition H1 LED Bulbs – designed for performance, built for simplicity. This powerful LED upgrade delivers a sharp, clean 6000K ice white output with a total output of 20,000 lumens, offering a drastic improvement over standard halogen H1 bulbs. ⚠️ Important: These are not suitable for cornering light applications. 🚀 Vision, Without Restriction We've engineered a direct-fit, no-fuss H1 LED solution that doesn't require any wire splicing, adapters, or awkward metal clips. Unlike many aftermarket options, CEUK’s H1 LEDs are built to fit into standard halogen bulb slots using the existing connectors and mounting points — just like OEM. Perfect for night drives, low-light conditions, or simply modernising your lighting setup, these bulbs are ideal for those who want high performance without the hassle. 💡 Why Upgrade to CEUK H1 LEDs? ✅ Direct OEM Fit – No clips, wiring mods, or converters ✅ 6000K Ice White Output – Modern, premium look ✅ Up to 20,000 Lumens Total Output – Huge visibility gain ✅ 50W Power Draw Per Bulb – Bright, but safe for OEM harnesses ✅ Projector & Reflector Compatible – Versatile installation ✅ No Flickering or Overheating – Optimised for daily driving ✅ Reduced Eye Strain – Crisp light that mimics daylight ✅ Quick & Easy Install – Designed with DIY installers in mind ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Colour Temp 6000K (Ice White) Brightness 10,000Lm per bulb (20,000Lm total) Fitment H1 (Standard Halogen Socket) 📦 What You’ll Receive: 2x CEUK Enhanced Edition H1 LED Bulbs (6000K Ice White) CEUK 12-Month Warranty (keep original packaging if longer warranty is stated) Support from our UK-based team if you need fitting advice 🔧 Vehicle Compatibility: This product is suitable for any vehicle using an H1 halogen headlight bulb – whether for dipped beam, high beam, or fog lights. Please Note: Always confirm bulb type before purchase. Some high-spec models (e.g. Ford ST, VW GTI) may use a different fitment than base trims. ⚠️ CANBUS Warning: Some vehicles may display a dashboard error message after installing LEDs due to reduced power draw. This is a harmless effect. See our FAQs for easy solutions like resistors or error cancellers, if required. 🧠 Did You Know? OEM halogen H1 bulbs typically produce 1,200–1,500 lumens per bulb. CEUK’s Enhanced Edition H1 LEDs provide over 6x the brightness with significantly less heat. White 6000K lighting not only looks better, but it improves contrast on road markings, kerbs, and signs — helping reduce driver fatigue during night driving. 🎯 Perfect For: Daily Drivers who want better visibility Car Enthusiasts looking to modernise the look of their headlights DIY Modders wanting a true plug & play upgrade Show Builds that need a clean, bright, premium light output  

Read more less

Enhanced Edition H8/11 LED Fog Light Bulb V3 – 6000K Ice White + Colour Tint Kit Upgrade your visibility and style with the CEUK Enhanced Edition H8/11 LED Bulb V3, the ultimate plug-and-play LED upgrade for your fog lights or dipped beam. Designed for OEM-fit compatibility, this next-generation bulb delivers an ultra-bright 6000K Ice White beam with no wiring or modification needed – and includes tint options for complete visual customisation. 🔥 Why Choose the V3 H8/11 Bulb? 💡 6,000 Lumens per bulb (12,000Lm pair) 🧊 6000K Ice White output as standard 🟡 Tint Kit Included: 2x 3000K Yellow Film Wraps 2x 8000K Cool White/Blue Film Wraps 🔧 Fits all H8 and H11 bulb sockets 🧩 No adapters, clips or wiring required 🌟 Compatible with reflector & projector housings 🧠 Designed to reduce eye strain while improving night-time visibility ⚠️ Fitment Note: Ensure at least 1 inch of space behind the bulb in your housing for safe installation. ✅ What’s in the Box: 2x CEUK Enhanced H8 / H11 LED Bulbs (6000K Ice White Default) 2x 3000K Yellow Adhesive Films (Fog Style) 2x 8000K Blue-White Adhesive Films (Colder Tint) Installation Tips 12-Month CEUK Warranty (keep packaging if a longer warranty is stated) ⚙️ Technical Specifications: Spec Detail Voltage 12V Wattage 50W per bulb Lumen Output 6,000Lm per bulb Colour Temp 6000K (default), optional 3000K or 8000K via tint film Fitment H8 / H11 🚗 Vehicle Compatibility: Fits any vehicle using H8 or H11 bulbs in: ✅ Fog Lights ✅ Low Beam / Dipped Beam (space permitting) ⚠️ Note: Check for trim-specific variations (e.g., Ford ST, VW GTI) before ordering. Some modern vehicles may display a dashboard bulb warning due to low power draw. This is harmless and may require a resistor or decoder depending on your vehicle. See our FAQs for more help. 🧠 Did You Know? OEM halogen bulbs output roughly 1,200–1,500 lumens CEUK Enhanced LED Bulbs deliver over 4x the brightness Yellow tint boosts visibility in fog, rain or snow 8000K offers a distinct premium aesthetic for show or daily use 🎯 Perfect For: Drivers seeking maximum light output Customisation lovers who want style + function Fog light or dipped beam LED upgrades Cars with tight headlight units (space-saving design)

Read more less

Enhanced Edition H7 LED Bulb V3 – 6000K Ice White + Tint Kit | 12,000Lm Output Take your headlights to the next level with CEUK's #Enhanced Edition H7 LED V3 Upgrade. Delivering powerful illumination with a sleek OEM-style fit, these bulbs are designed for drivers who demand maximum visibility, improved safety, and a customisable finish – all in one upgrade. Engineered to outperform traditional halogen and even most LED rivals, the V3 model is CEUK’s most advanced yet. 🔥 Why Choose the H7 LED V3? ✅ High Output – 12,000 Lumens (6,000 per bulb) ✅ 6000K Ice White Default Output – sharp, modern lighting 🎨 Custom Tint Kit Included: 2x 3000K Yellow Films (fog-style, ideal for poor weather) 2x 8000K Blue-White Films (cool show car aesthetic) ✅ Projector & Reflector Compatible ✅ DIY-Friendly Installation ✅ Improves Night-Time Visibility & Road Contrast ✅ Reduces Eye Strain During Driving ⚠️ Installation Notes & Fitment Considerations: Some vehicles may require LED adapter clips (Sold Seperately) – contact us if unsure. These bulbs include an integrated driver/heat sink – ensure sufficient space behind your headlight housing. If your model is tight on space, check fitment first by emailing support@ceuk.org. LED installation may trigger dash bulb-out warnings on some vehicles – this is harmless and easily resolved (see our FAQs). 📦 What’s in the Box: 2x CEUK Enhanced H7 LED Bulbs – 6000K Ice White (default) 2x 3000K Yellow Adhesive Tint Films 2x 8000K Blue-White Adhesive Tint Films Installation Tips 12-Month Warranty (Keep packaging if longer warranty is specified) ⚙️ Technical Specifications: Spec Value Voltage 12V Wattage 50W per bulb Lumens 6,000 per bulb (12,000 total) Colour Temp 6000K standard, 3000K & 8000K via tint Fitment Type H7 (Standard Halogen Socket) 🚗 Vehicle Fitment Guidance: These bulbs are compatible with any H7-equipped vehicle, including: Ford, VW, BMW, Vauxhall, Audi, Mercedes, and more Suitable for headlights or fog lights (space-dependent) May require model-specific clips or holders 📌 Special trims (e.g. ST, GTI) may use different bulbs – always confirm your vehicle’s bulb type before purchase. 🧠 Did You Know? Standard halogen H7s typically produce ~1,200 lumens. CEUK’s V3 delivers up to 10x more light The included film kit means three beam colours in one product 3000K yellow is ideal for fog, rain, or snow 8000K blue is perfect for show use or premium aesthetics

Read more less

IllumiNite White Halogen Fog & Cornering Bulb – 35W | 6500K Ice White Upgrade your visibility and style with CEUK’s IllumiNite White Halogen Bulb, part of our premium lighting range. Designed as a direct halogen replacement, this bulb delivers a crisp 6500K Ice White beam that enhances both form and function without needing any LED conversion. Ideal for use in fog light and cornering light applications, the IllumiNite range is your go-to choice for a factory-fit appearance with a significantly brighter, whiter output. Will also work fine as a dipped or main beam! 💡 Key Features: ✅ Direct Halogen Replacement – plug-and-play fitment ✅ 35W Output – legal and compatible with most factory housings ✅ 6500K Colour Temperature – pure Ice White finish ✅ Ideal for Fog & Cornering Lights ✅ OEM Fitment with Enhanced Brightness ✅ Long-Life Design with Stable Output 🔧 No wiring mods, resistors or adapters required – just remove the old bulb and install. ⚠️ Vehicle Fitment Notice: Compatible with most vehicles using H11 halogen fog or cornering bulbs Some trims (e.g., Ford ST, VW GTI) may use alternate light units – please verify bulb type before ordering For confirmation, check your vehicle manual or contact us at support@ceuk.org 🛡️ Warranty: 12-Month Warranty included as standard If a longer warranty is noted on the packaging, keep it safe as proof of eligibility

Read more less

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

💡 Enhanced Edition H7 LED V2 Headlight Upgrade Say goodbye to dim, underperforming headlights and welcome next-level illumination with our H7 LED V2 Upgrade from the #Enhanced Edition range. Crafted for those who demand brilliant light output without compromising OEM fitment, these bulbs pack power, precision, and reliability into one sleek solution. 🚀 Vision, Without Restriction Engineered for maximum brightness and clarity: ✅ Plug-and-play design with OEM-level fitment 💥 20,000 Lumens Total (10,000 per bulb) 🔧 Works with both projector and reflector headlamp units 🌙 Reduces eye strain and improves visibility at night ❄️ 6000K Ice White colour for that clean, modern look ⚠️ Note: Due to the integrated driver and heat sink, check housing space before purchase. Some vehicles may require additional LED clips – sold separately. 📦 What’s in the Box? 2x H7 Enhanced Edition LED Bulbs (6000K Ice White) 💬 LED Clip Not Included(If your vehicle requires a clip, feel free to contact us to confirm before ordering.) ⚙️ Technical Specifications Voltage: 12V Wattage: 50W per bulb Lumens: 20,000 total (10,000 per bulb) Compatibility: Suitable for most vehicles using H7 fitment (please confirm before ordering) 📌 Vehicle Fitment Notes Some vehicles — particularly higher-spec models like Ford ST, VW GTi, etc. — may use different housings or mounting styles.We recommend double-checking your existing bulbs or contacting us to verify compatibility. ⚠️ Dashboard Error Warning: Some cars may display a harmless warning message when LEDs are installed. Please refer to our FAQ section for info and remedies. 🛡️ Warranty Info Backed by a 12-month guarantee as standard.If your packaging states a longer warranty, please retain it for proof of eligibility.

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

3-Piece Trim Removal Tool Kit – Ideal for Fog Guards & Indicators Tackle those tricky trim jobs with confidence using our 3-Piece Trim Removal Tool Kit – a must-have for any enthusiast or DIY installer. These tools are especially handy for removing mirror caps, fog surrounds, and installing sequential indicators or fog light guards. Made from durable plastic, they're designed to protect your paintwork and trim from damage during removal. 🧰 Key Features: ✅ Set of 3 identical trim tools ✅ One narrow end per tool – perfect for tight spaces ✅ Ideal for mirror caps, fog light surrounds & delicate plastics ✅ Prevents scratches and scuffs on bodywork ✅ Trusted by CEUK team for installs! 🔩 Use For: Fog Light Guard installations Sequential Indicator installs Mirror Cap removal General interior or exterior trim jobs 📦 What’s in the Kit? 3x Trim Removal Tools (identical design, one narrow end each) 🛡️ Warranty Tools are non-electrical and do not carry a warranty – however, they are built to last for repeated use.

Read more less

H7 HID Replacement Bulb – 5000K / 6000K Options Need a fresh, reliable replacement for your existing HID kit?Our H7 HID Replacement Bulb is compatible with most HID systems – including CEUK Enhanced and Ultimate Kits – and is perfect if your current bulb has dimmed or stopped working. 🔧 Key Features: 🔄 Direct Replacement for most aftermarket HID kits 🌈 Available in 5000K (Pure White) or 6000K (Ice White) ⚡ 12v Compatible – Plug & play 💡 Ideal for restoring brightness and clarity 📦 What’s Included: 1x H7 HID Bulb in your selected colour temperature(Price is for a single bulb – order quantity 2 for a full headlamp set) 🧠 Good to Know: 🔴 Live wire may be red or blue depending on batch – product performance is identical 🛠️ Not vehicle-specific – check your bulb fitment before ordering 🧰 Suitable for any standard H7 HID ballast setup 🛡️ Warranty: ✔️ 12 Months Warranty as standard📦 If packaging states longer, keep it safe to retain extended cover 🚗 Vehicle Fitment: While this bulb is compatible with most HID kits, always confirm your vehicle uses H7 fitment. Special editions (e.g. Ford ST, VW GTi) may differ in configuration.

Read more less

Q0491 Mercedes G-Class W460/W461/W463 Fitment Guaranteed High Quality Standards 100% Secure Payments

Read more less