Performance - Audi A6 C8 (2020-Present)

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:70mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:76mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:83mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit Ramair universal filters are designed and manufactured for a very diverse range of applications. These filters themselves are constructed using stainless steel cage internal and a twin layer foam. They have an rubber polymer neck and a cone shaped filter element. These filters are cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of foam surface area an added boost of power to your engine too! Clean using our filter maintenance kit - CK-003 Filter Neck Outer Diameter:90mm Filter Neck Length:25mm Filter Base Width:195mm Filter Top Width: 120mm Filter Overall Length:200mm Filter Material: 15mm Dual Layer Foam Filter Base Material:Rubber polymer

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be fitted to the outside of a rigid pipe such as a MAF sensor housing. These filters have an rubber polymer neck and a cone shaped filter element. This enables easy fitting to space-restricted engine compartments, whilst providing a large surface to maximise potential air flow. The filters are constructed using stainless steel cage internal and our famous 15mm thick twin layer foam.  Ramair universal filters are designed and manufactured for a very diverse range of applications and are made here in the UK. They are available in many different sizes and styles available.  Clean using our filter maintenance kit - CK-003 This product has the following dimensions: Filter Internal Neck Diameter: You choose Filter Neck Length: 23mm Filter Overall Height: 130mm Filter Base Width: 150mm Filter Top Width: 93mm Filter Material: 15mm Dual Layer Foam

Read more less

This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle catergory does not mean it will definitely fit This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe. These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too! These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car. With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates. Filter Outer Neck Diameter: Select Your Option Filter Neck Length: 45mm (1.8inch) Filter Overall Length: 185mm (7.3inch) Filter Base Width: 150mm (5.9inch) Filter Top Width: 120mm (4.7inch) Filter Material: Pleated Nanofibre Filter Base Material: Aluminium Filter Base Finish: Black Powder Coat

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

The T9380 is the latest addition to the DV+ range of diverter valves from GFB (Go Fast Bits). It is specifically designed as a complete replacement for the newer generation of Continental brand OEM diverter valves found in late-model VW and Audi vehicles. Unlike the earlier generation diverter valves manufactured by Pierburg, the newer Continental valves cannot be disassembled and integrated into a DV+. Therefore, GFB developed the T9380 with a low-profile integrated solenoid as a complete replacement for the Continental diverter valve, enabling a hassle-free installation with no clearance issues. Like all valves in the DV+ range, the new T9380 delivers the following benefits over the OEM diverter valve: T9380 DV+ Improved boost holding Sharper throttle response Faster boost recovery after a gearshift or brief throttle lift Unrivalled longevity, backed by our Lifetime Warranty Improved Boost Holding Since electronic OEM diverter valves first appeared in the mid-2000s, there have been many revisions over the years in an attempt to address reliability issues. Whilst the latest generation of OEM diverter valves have become more reliable, there is always a performance trade-off due to their operational method and plastic construction. When GFB engineers performed boost leak testing on the OEM diverter valve in a VW Mk8 Golf R, they found the leak was significantly larger than in earlier generations. This excessive leaking is due to the emerging trend of manufacturers mounting diverter valves remotely on plastic piping rather than directly on the turbocharger. A plastic valve mechanism closing onto a plastic seat resulted in the largest OEM diverter valve leak we’ve seen yet at 28L/min at 1 Bar of boost. Even with the Viton face seal (featured on all DV+ pistons), the plastic OEM seat face was found to be so uneven that it was impossible to achieve a reliable seal. The T9380 successfully addresses this issue by incorporating an integral piston seat machined into its body. This design ensures a proper seal, even on uneven plastic OEM seats. Sharper throttle response, faster boost recovery after brief throttle lift Factory electronic diverter valves are binary in operation – they’re either open or shut. Your throttle, however, isn’t. When you make small throttle adjustments, the binary operation of the factory diverter results in abrupt changes in power delivery, which is the very definition of poor throttle response. The DV+ patented “pilot actuation” system allows the piston to open and close progressively, thereby smoothing the power delivery during throttle modulation, and ultimately improving throttle response. Unrivalled longevity, backed by our Lifetime Warranty The combination of precision manufacturing, attention to detail, and robust materials mean the DV+ will last a lifetime. So does the warranty! FITS: Make Model Mark Variant FuelType YearFrom YearTo Audi A4 B9 Avant RS4 quattro Petrol 2017 2024 Audi A4 B9 Avant S4 quattro Petrol 2016 2019 Audi A5 F5 RS5 quattro Petrol 2017 2024 Audi A5 F5 S5 quattro Petrol 2017 2024 Audi A5 F5 S5 quattro Petrol 2016 2024 Audi A5 F5 S5 quattro Petrol 2016 2024 Audi A6 C8 Avant 3.0 55 TFSI Mild Hybrid quattro Hybrid 2018 2024 Audi A6 C8 S6 TFSI Mild Hybrid quattro Plug-In 2020 2024 Audi A6 C8 Saloon / Limousine 3.0 55 TFSI Mild Hybrid quattro Hybrid 2018 2024 Audi A7 4KA 55 TFSI Mild Hybrid quattro Petrol 2017 2024 Audi A8 4N2,4N8,4NC,4NL 50 TFSI Mild Hybrid quattro Plug-In 2018 2024 Audi Q5 SQ5 TFSI quattro Petrol 2021 2024 Audi Q7 4MB 55 TFSI quattro Plug-In 2021 2024 Audi Q8 4MN 55 TFSI e quattro Plug-In 2020 2024 Audi Q8 4MN 55 TFSI Mild Hybrid quattro Plug-In 2018 2024 Skoda Octavia MK4 2.0 TSI RS Petrol 2020 2024 Volkswagen Golf MK8 2.0 GTI Petrol 2020 2024 Volkswagen Golf MK8 2.0 GTI Petrol 2020 2024 Volkswagen Golf MK8 2.0 GTI Petrol 2021 2024 Volkswagen Golf MK8 2.0 GTI Clubsport Petrol 2020 2024 Volkswagen Golf MK8 2.0 TSI R 4motion Petrol 2020 2024

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo  

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear!  It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these.  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

Front Splitter Audi A6 Allroad C8 FITS ONLY:Audi A6 Allroad C8 (2018-2023) COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Central Rear Splitter (Vertical Bars) Audi A6 Allroad C8 FITS ONLY:Audi A6 Allroad C8 (2018-2023) COMPLETE SET CONTAINS:-> Rear Diffuser-> Fitting manualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Side Skirts Diffusers Audi A6 Allroad C8 FITS ONLY:Audi A6 Allroad C8 (2018-2023) COMPLETE SET CONTAINS:-> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Spoiler CAP 3D Audi A6 Avant / A6 Allroad / A6 S-Line Avant / S6 Avant C8 FITS ONLY:Audi A6 Allroad C8 (2018-2023) Audi A6 Standard Avant C8 (2018-2023) Audi A6 S-Line Avant C8 (2018-2023) Audi S6 Avant C8 (2019-2023) COMPLETE SET CONTAINS:-> Spoiler Extension + 3M Tape-> Degreasing Cloth-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.

Read more less