Performance - Ford Focus MK2 (2004-2010)

The all new ST logo Key Chain by CEUK Featuring a Gloss Black central logo outline and 1 logo either side in your chosen colour, to give a fully 4D design! Made from Premium 3mm Acrylic sections, this keyring has the following specs: Width: 81mm / 8.1cm Height: 37mm / 3.7cm Thickness: 9mm / 0.9cm Supplied fully assembled complete with Key Chain, this is the perfect modification for any Ford Car Key! Please note: The centre is supplied Gloss Black as standard, if you would like a different colour please contact us via email or whatsapp.

Read more less

Add the finishing touch to your interior with our Dead Pedal Foot Rest. The CEUK Dead Pedal is the latest in a long line of CEUK products produced In house on our top of the line Laser Cutter.  Constructed from Premium 5mm Acrylic, this product is available in a multitude of designs and colours to suit any colour scheme! No mechanical background or tools are required, fitting will take less than a couple of minutes to complete. Please note this dead pedal is NOT a direct fit for left hand drive models or AUTOMATIC Models Fitment: Mk2 Ford Focus All Models (2004-2010) Choice: Choose from either Double Sided Velcro or Double Sided Gel Tape to attach this to your vehicle, depending on whether your car has a plastic or carpet footrest! Addons: The pedal is supplied as standard with a Gloss Black Face with your chosen colour as the background showing through as the pattern / design. If you would like a customisation or a different coloured face plate, please drop us an Email or WhatsApp! Fully customise your dead pedal further by adding one of our "Logo Inserts" in any colour by clicking here. Want a colour that isnt on our listing? Get in touch!

Read more less

These are replacement logos for our CEUK dead pedals - they come with double sided tape on the rear and drop right in to change the colour of your dead pedal logo! Can also be used wherever else you can stick one!

Read more less

The price is for ONE PAIR of spacers - if you wish to do all 4 spacers, you need to order QTY x2 The Wheel Spacers Detailed Below Also fits the following Vehicles: Manufacturer Vehicle Model Year FORD BRONCO 01.19 - FORD C-MAX 02.07 - 09.10 FORD FOCUS FOCUS C-MAX 10.03 - 03.07 FORD FOCUS FOCUS II (DA_) 07.04 - 09.12 FORD FOCUS FOCUS III 04.11 - FORD FOCUS FOCUS IV (HN) 01.18 - FORD GRAND C-MAX GRAND C-MAX (DXA/CB7, DXA/CEU) 12.10 - 06.19 FORD KUGA KUGA I 03.08 - 11.12 FORD KUGA KUGA II (DM2) 05.12 - 2019 FORD KUGA KUGA III (DFK) 07.19 - FORD MONDEO MONDEO III (B5Y) 11.00 - 03.07 FORD PUMA PUMA (J2K, CF7) 09.19 - FORD TOURNEO TOURNEO COURIER V769 GROßRAUMLIMOUSINE (N1P) 07.23 - FORD TRANSIT TRANSIT COURIER V769 GROßRAUMLIMOUSINE (N3P) 11.23 - JAGUAR F-TYPE 10.13 - VOLVO C30 12.06 - 12.12 VOLVO C70 03.06 - VOLVO S40 01.04 - 12.12 VOLVO V40 V40 SCHRÄGHECK / V40 HATCHBACK (525, 526) 03.12 - VOLVO V50 04.04 - The Table Below Shows Each Spacer Size & System: Spacer Width Total Car Widening System Number 9mm 18mm 6N 15mm 30mm 4 20mm 40mm 4 25mm 50mm 4 30mm 30mm 4 35mm 70mm 4

Read more less

CLEARANCE AND NONE RETURNABLE   PACKS OF ST ACRYLIC BADGES IN BLACK WITH STICKY BACKING ON THEM.  SEE PICTURES FOR SIZING. 

Read more less

Manufactured from Lloyds approved Grp materials to a very nigh standard.  This product comes in Gloss black exactly as pictured with all fixings required.

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.Sold as a Pair.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our MK2 RS modified splitter, Specifically styled design that follows the curves and angles of the front bumper. The modified was designed for those with the lowered RS, sitting flush against the bumper and sitting higher than the original version.   This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our MK2 RS Standard front splitter is the original design, Specifically styled design that follows the curves and angles of the front bumper. The Standard leaves a gap between the bumper and the splitter making it lower varient for the MK2 RS.  This product is manufactured utilising time proven composite technology. They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.   Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.Please note - We advise to use a small amount of polyurethane (such as tigerseal) adhesive to help secure the brows when fitting.

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat.This diffuser fits into place and requires the use of the two original fixings.This product may require some trimming / sanding to ensure the perfect fit and we advise for the perfect finish to have the product sprayed gloss black.Fitting guidance1 - Make sure the clips are sanded down to a thickness of around 4mm max2 - Lube up the clip area on the cars bumper, all the way around the clip section (WD40)3 - Take a blunt screw driver or such like to the clip section on the bumper and prise open the clips holes (don’t worry they shouldn’t break, the plastic clip section on the bumper will form its original shape once you have fitted the diffuser) Doing this will help the clips slot in as they are bigger than the original clips.4- Start from one end of the diffuser, you will notice once a few clips are in it will become a bit tougher, as you get to the tight/tougher area of the diffuser you’ll need a hand pushing from behind the bumper and the other pushing against the diffuser, forcing the diffuser into the bumper 5- If the clips look like are not lining up, lift the diffuser upwards whilst still pushing against the bumper.You may need to repeat step 5 for all the clips across the top section of the diffuser, the more clips you get in the easier it becomes and it should end up in place towards the last few clips.Please try to ignore the fact it looks like it doesn’t fit.. It does

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK2.5 ST V2 front splitter, Specifically styled design that Follows the front bumpers curves. The V2 front splitter is the higher level splitter option and is more suited to the lowered Focus ST's. If you are wanting to acheive the lower appearance on your ST225 then check out the V1   This product is manufactured utilising time proven composite technology.   They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK2.5 ST front splitter, Specifically styled design that follows the curves of the front bumper. This splitter will add around 2" to the centre section of the bumper, giving the ST's front end a lower stance.   This front splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

PLEASE NOTE – THIS PART IS NOT SUPPLIED IN A PRE-FINISHED STATE, IT WILL REQUIRE PREPPING AND PAINTING.  Manufactured from fibreglass.  This part will require bonding on to the spoiler using a polyurethane adhesive (such as tigerseal).   Some sanding / trimming may be required.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper Our Ford Focus MK2 ST Pre facelift front splitter, Specifically styled design that follows the curves of the front bumper. This product is manufactured utilising time proven composite technology.This front splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.Sold as a Pair. It comes with a full stainless steel fitting kit and is a simple direct fit.  Need help fitting? We can do this for you, feel free to get in touch.

Read more less

THIS IS BRAND NEW UNUSED STOCK ON CLEARANCE New easy fit design with the end of the pipes swayed to stop the pipes blowing off on mapped Focus RS’ Features: Direct replacement! No modding required Billet airflow sensor boss Main induction pipe body is high quality alloy and manderal bent – no welds Super light weight design Alloy has better heat deplacement compared to stainless – so colder air enters the turbo Profiled 3mm thick securing brackets Available in polished or stealthy Pro-Series Black Swaged ends to prevent pipes from coming off Replaces that ugly Ford black plastic Induction pipe in a matter of minutes. Fitting takes only 10 minutes, why not add some of our new stainless steel fitting posts to go with your new induction pipe, these can be added on the options list. Picture 4. Stainless fitting posts are not needed to fit your new alloy induction pipe, they just enhance the overall look. Please note: This product will only fit with the uprated Pro Hoses turbo to crossover. Registered Design Right number: 6033439

Read more less

THIS IS BRAND NEW UNUSED STOCK ON CLEARANCE FITS STOCK TURBO ONLY As part of our expanding Focus Mk2 product range, AIRTEC Motorsport are proud to launch our 90mm enlarged induction pipe suitable for track or fast road use. A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a huge increase in overall internal volume to reduce restriction and improve flow to the turbo. The kit features a large AIRTEC Motorsport cotton air filter that mounts to an 80mm aluminium trumpet and a silicone coupler attaches it the enlarged induction pipe, which measures 90mm throughout, offering a 29% increase in diameter and capacity. This increases to 100mm diameter to suit aftermarket big turbo inlets. Made from high quality aluminium for an improved look and feel, the larger pipe also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look. The comprehensive package includes all silicone connectors, fixtures and fittings, which makes installation a simple task. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification for modified cars. Please note: This kit does not feature a MAF sensor and so will not work with the OEM ECU. Only aftermarket ECU configurations that do not use a MAF sensor, such as Syvecs/ECU Master/SCS Delta will be compatible. Specification: Suitable for Mk2 Focus RS Stock RS turbo or big turbo options Huge improvement to turbo air flow Made from lightweight aluminium High quality powder-coated black finish AIRTEC Motorsport plaque Includes all fixtures and fittings AIRTEC Part No: ATMSFO127

Read more less

ITG Profilter is the lightest and most capable filter on the market, designed to optimise the performance of every car. Used in Formula 1 vehicles and throughout the world of motorsport, Profilter's advanced technology makes it the filter of choice for automotive professionals and enthusiasts. Hand manufactured in the UK using a high-grade Trifoam system, Profilter gives three layers of air filtration to trap even the finest pieces of dust and dirt, while optimising air flow performance. Profilter is long-lasting, economical, and maximises performance from road to race. Filter size: 70 x 192 Make Model Variant Year(s) Engine Code BHP Quantity Required Ford C-MAX I, II, Grand C-MAX All Variants 07- 1 Ford Focus II [Inc. Cabriolet & C-MAX] All Variants 07-11 [Excl. RS Turbo, ST] 1 Ford Focus II [Inc. Cabriolet & C-MAX] RS, RS500 09- 305, 350 1 Ford Focus III All Variants 11- [Excl. ST] 1 Ford Focus III All Variants Inc ST & RS 12- 86-360 1 Ford Kuga I, II 1.6 [EcoBoost SCTi] 2.0 [TDCi] 08- Duratorq, Sigma 120, 136, 140, 150, 163, 180, 182 1 Ford Kuga I, II 1.5 [EcoBoost] 14- 150, 182 1 Ford Tourneo, Courier, Transit Connect I, II All Variants 13-16 [Excl. Courier] 1 Mazda 3, 5 (BK, BL, BM, CR, CW) 1.6 [CD, MZ-CD] 10- 115 1 Volvo C30 1.6 [D] 07-10 D4164T 109 1 Volvo C30 1.6 [D2] 1.8, 2.0 [Flexifuel] 07-10 B4164S3, B4184S8/11, B4204S3/4, D4162T 100, 114, 125, 145 1 Volvo C30 2.0 [D] 07-10 D4204T 136 1 Volvo C70 I, II 2.0 [D] 07- D4204T 136 1 Volvo S40 II, V50 1.6 [D2] 1.8, 2.0 [Flexifuel] 07- B4164S3, B4184S8/11, B4204S3/4, D4162T 100, 114, 125, 145 1 Volvo S40 II, V50 2.0 [D] 07- D4204T 136 1 Volvo S40 II, V50 1.6 [D] 07-10 D4164T 109 1 Volvo V40 II, Cross Country 1.6 [D2, T2/3/4] 12- B4164T/T3/T4, D4162T 115, 120, 150, 180     Will an ITG ProFilter increase performance? Yes, an ITG ProFilter can increase performance. It is a high-flow air filter upgrade designed to fit inside the car’s existing airbox. It is designed to provide better filtration than a standard paper air filter while offering a larger open surface area. This can result in increased horsepower, torque, and improved throttle response. Is there an environmental benefit to using an ITG ProFilter? Another critical benefit to note is the environmental one. The ITG ProFilter is designed to be reusable, whereas a single-use paper filter is not. When you replace a single-use paper filter, you are throwing away a filter that is only partially used. With a cleanable filter, you can reuse the filter many times, reducing the amount of waste produced.Second, cleanable air filters can save energy. When a dirty air filter is used, it can restrict airflow to the engine. This can cause the engine to work harder, decreasing fuel efficiency and increasing emissions. A cleanable filter can help keep the engine running smoothly and efficiently, saving fuel and reducing emissions.

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Focus Mk2 1.8 2005-2011 ATE FORD Focus Mk2 2.0 2005-2011 ATE FORD Focus Mk2 1.8 Turbo Diesel 2005-2011 ATE FORD Focus Mk2 2.0 Turbo Diesel 2005-2011 ATE

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Focus Mk2 ST 2.5 Turbo 225 2005-2011 320MM DISCS ATE

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type FORD Focus Mk2 ST 2.5 Turbo 225 2005-2011 ATE

Read more less