THIS IS BRAND NEW UNUSED STOCK ON CLEARANCE
New easy fit design with the end of the pipes swayed to stop the pipes blowing off on mapped Focus RS’
Features:
Direct replacement! No modding required
Billet airflow sensor boss
Main induction pipe body is high quality alloy and manderal bent – no welds
Super light weight design
Alloy has better heat deplacement compared to stainless – so colder air enters the turbo
Profiled 3mm thick securing brackets
Available in polished or stealthy Pro-Series Black
Swaged ends to prevent pipes from coming off
Replaces that ugly Ford black plastic Induction pipe in a matter of minutes.
Fitting takes only 10 minutes, why not add some of our new stainless steel fitting posts to go with your new induction pipe, these can be added on the options list.
Picture 4. Stainless fitting posts are not needed to fit your new alloy induction pipe, they just enhance the overall look.
Please note: This product will only fit with the uprated Pro Hoses turbo to crossover.
Registered Design Right number: 6033439
THIS IS BRAND NEW UNUSED STOCK ON CLEARANCE
FITS STOCK TURBO ONLY
As part of our expanding Focus Mk2 product range, AIRTEC Motorsport are proud to launch our 90mm enlarged induction pipe suitable for track or fast road use.
A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a huge increase in overall internal volume to reduce restriction and improve flow to the turbo. The kit features a large AIRTEC Motorsport cotton air filter that mounts to an 80mm aluminium trumpet and a silicone coupler attaches it the enlarged induction pipe, which measures 90mm throughout, offering a 29% increase in diameter and capacity. This increases to 100mm diameter to suit aftermarket big turbo inlets.
Made from high quality aluminium for an improved look and feel, the larger pipe also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look.
The comprehensive package includes all silicone connectors, fixtures and fittings, which makes installation a simple task.
With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification for modified cars.
Please note: This kit does not feature a MAF sensor and so will not work with the OEM ECU. Only aftermarket ECU configurations that do not use a MAF sensor, such as Syvecs/ECU Master/SCS Delta will be compatible.
Specification:
Suitable for Mk2 Focus RS
Stock RS turbo or big turbo options
Huge improvement to turbo air flow
Made from lightweight aluminium
High quality powder-coated black finish
AIRTEC Motorsport plaque
Includes all fixtures and fittings
AIRTEC Part No: ATMSFO127
Currently made to order, please allow 2-3 weeks before dispatch.
AutoSpecialists Design extended wheel arches for the Focus ST 225 (Pre-Facelift)
Suitable for the Focus MK2 ST 225 5-door Pre-Facelift to fit with standard front bumpers.
**IMPORTANT**
Unpainted, comes finished in white or black coating.
We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.
Registered Design Right number: 6044470
Part no: ASDFO18
AutoSpecialists Design WRC style bonnet vents.
Available for Focus MK2 pre-facelift.
**IMPORTANT**
Unpainted, comes finished in white or black coating.
We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.
Supplied with cutting templates.
Please note: Mesh not included.
Registered Design Right number 6016416
AutoSpecialists Design WRC style bonnet vents.
Available for Focus MK2 Facelift (INC RS)
**IMPORTANT**
Unpainted, comes finished in white or black coating.
We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.
Please note: Mesh not included.
Registered Design Right number 6021160
AutoSpecialists Design Focus RS Mk2 Spoiler Lip
Finished in a high quality gel coat ready to paint, designed to fit over the standard spoiler.
Please note: We cannot guarantee security, double-sided tape can be at risk of lifting when using a jet wash or when travelling at high speed. Bonding the spoiler lip is recommended to ensure it doesn’t lift or come off.
**IMPORTANT**
Unpainted, comes finished in white or black coating. comes with no adhesive- will need to source your own.
We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.
Part no: ASDFO24
The AIRTEC Motorsport Air-Ram Scoop and RS Slam Panel for Group A induction kit just got better!
Now offered with an AIRTEC Motorsport-branded RS slam panel that fits both pre-facelift and facelift models.
The Group A open air filter kit has been a great addition to the ST225 product range through the years, however ensuring it has a constant feed of cold air feed can prove tricky.
AIRTEC Motorsport has come up with the ideal solution with our Air-Ram diverter scoop that has a factory appearance with in the engine bay but works to continually force cold air towards the filter, ensuring consistent flow and performance.
The optional AIRTEC Motorsport slam panel fits all ST models and works with the Air-Ram diverter scoop for the perfect combination.
Please note, this currently only fits AIRTEC’s Group A induction kit.
Kit includes:
1x Alloy fabricated Air-Ram feed finished in Pro-Series satin black
3x Billet alloy spacers and stainless-steel fittings
Optional AIRTEC Motorsport RS slam panel that fits both pre-facelift and face lift models
AIRTEC part no: ATMSFO45
As part of our expanding Focus RS product range, AIRTEC Motorsport is proud to launch our Stage 3 intercooler upgrade suitable for track or fast road use.
In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have taken our hugely popular Stage 1 Focus RS intercooler and modified it to fit within the ST bumper and added our 2.5″ Pro Hoses(intercooler to inlet manifold connector and Pro Hoses intercooler to ST boost hose.
This offers a massive increase in overall capacity in comparison to the original intercooler, as well as a significant increase in frontal area over standard, which allows it to make the most of the air flow provided.
Together with our high-flow end tanks and air diverter scoop to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard.
Matched with our 2.5″ hard boost pipe upgrade that replaces the OEM 2″ pipework. Increasing the dimeter reduces restriction and improves flow, which in turn sees an instant increase in power, as seen during back-to-back dyno testing which saw a huge 11.8bhp and 9lb ft of torque gain simply by fitting the new pipework.
Features:
Huge high flow 60mm core
Air Ram Scoop forces air directly into core of intercooler
Smooth-flow end tanks
AIRTEC logo brackets
2.5″ pipe work improves flow
Increased BHP & torque
Pro-Series Black or Natural Silver
Strongest intercooler available, backed up by our 3-year warranty
Please note: Pipework only available in Pro-Series Black
PLEASE ADD NOTE AT END NEAR CHECKOUT OF WHICH LOGO COLOUR YOU WOULD LIKE ON INTERCOOLER:- NO LOGO-WHITE-YELLOW-BLUE-RED-PURPLE-PINK-ORANGE-GREEN -GREY-BLACK
Important Note: The Pre-facelift ST has a different radiator compared to the facelift & RS, this makes the left hand cold side silicone hose very tight against the radiator cradle. We recommend removing the radiator cradle bolt, levering the cradle to the right and re-drilling a new hole & then replacing the bolt. It’s very simple and easy to do, but is necessary to give you extra clearance for the bigger 2.5″ cold side hose. If you are still not happy with the fit, we would recommend fitting an RS radiator.
Registered Design Right number: 6022644
AIRTEC Part No: ATINTFO34
AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.
AIRTEC Part Number: ATMER38
TECHNICAL DATA
AIRTEC Motorsport Embroidered High-Quality Car Mats
Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.
Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting.
Fits Right-Hand Drive vehicles only
⦁ AIRTEC Motorsport branded complete set of front and rear mats⦁ Fitted with original retaining/mounting holes where applicable⦁ High-quality finish in black with white embroidered logo⦁ Huge range of makes and models available⦁ Vehicle specific – no trimming required
AIRTEC Part Number: ATMER38
AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.
TECHNICAL DATA
AIRTEC Motorsport Embroidered High-Quality Car Mats
Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.
Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting.
Fits Right-Hand Drive vehicles only
⦁ AIRTEC Motorsport branded complete set of front and rear mats
⦁ Fitted with original retaining/mounting holes where applicable
⦁ High-quality finish in black with white embroidered logo
⦁ Huge range of makes and models available
⦁ Vehicle specific – no trimming required
AIRTEC Part Number: ATMER37
Back by popular demand is our Stage 2 Closed Air Induction System (CAIS) made from real carbon fibre. Now with a new design but the same huge benefits that still make it the best induction kit on the market for the Mk2 Focus RS.
AIRTEC Part No: ATIKFO14
Back at last by popular demand is our revised Stage 2 Closed Air Induction System (CAIS) made from real carbon fibre. Now with a new design but the same huge benefits that still make it the best induction kit on the market for the Mk2 Focus RS.
What’s the difference?The top section was raised and blended to aid air flow to the huge Group A cone filter inside, whilst the right-hand side of the snorkel area was also enlarged and the underside of the snorkel section that joins into the lower section of the filter was made bigger.
Can I have a choice in hose colour?Yes you can choose from a wide range of colours, please select from the menu.
Features:
Made from genuine carbon fibre with a high quality gloss finish
Huge Group A cone filter element housed inside
Fully enclosed design to ensure minimum heat soak
5-ply 6mm thick quality silicone Pro Hoses
Proven to increase power on the rolling road
Power gains of 10-20 bhp (depending on spec of car)
Noticeable difference in performanc
Comes assembled and ready to install in a matter of minutes
AIRTEC part no: ATIKFO14
Turbo to crossover hose for the Focus ST 225.
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Purple, Vivid Pink, Ultimate Green
Please allow 2-4 weeks for delivery.
You asked and we listened – AIRTEC Motorsport is proud to launch our RS-style crossover pipe for the Mk2 Focus ST 225, suitable for track or fast road use.
The challengeWe’re always eager to develop parts and products that cater for our customer’s needs and with interest shown to produce an RS-style intake pipe that crosses over the top of the engine instead of working around it to reduce restriction and improve sound, response as well as under bonnet looks.
The solutionDesigned to exclusively to fit the ST model but in a similar style to our incredibly popular Mk2 Focus RS enlarged crossover pipe, this direct replacement pipe offers a shorter and simpler path from the air filter to the turbo inlet.
Where as the original ST intake pipework deviates from 80mm down to 70mm through a series of bends, including a harsh 90-degree turn, our RS-style pipe measures 76mm throughout the entire length and removes the restrictive 90-degree bend. It also allows the fitment of our huge Focus RS Group A filter; which is the largest filter we offer, whilst retaining the original MAF sensor, so there is no need to adjust the ECU calibration.
Made from high quality aluminium, it is offered in either Motorsport brushed silver or powder coated black finishes and features a laser cut AIRTEC Motorsport plaque. The comprehensive kit also includes a Pro Hoses silicone connector and all fixtures and fittings, which makes installation a simple task.
Available with optional vacuum pipe (highly recommended) that reroutes to suit the new intake pipe layout correctly.
Specification:
Increase in overall internal diameter
Removes restrictive 90-degree bend
Improves response and sound
RS-style improved appearance
Direct replacement fitment
Made from high quality aluminium
Retains original MAF sensor
Optional rerouted vacuum line
Available in Motorsport brushed silver or powder coated black finishes
Includes all fixtures and fittings
Features detailed fitting guide
As part of our expanding Focus Mk2 product range, AIRTEC Motorsport are proud to launch our 76mm enlarged induction pipe suitable for track or fast road use.
A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a smoother design with less bends to hinder airflow and an increase in overall internal volume to reduce restriction and improve flow to the turbo. The kit features a large AIRTEC Motorsport cotton air filter that mounts to an 80mm aluminium trumpet. A silicone coupler attaches it the enlarged induction pipe, which measures 76mm throughout, before it meets the original turbo inlet fitting.
Made from high quality aluminium for an improved look and feel, the larger pipe also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look.
The comprehensive package includes all silicone connectors, fixtures and fittings, which makes installation a simple task.
With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification for modified cars.
Specification:
Suitable for Focus Mk2 ST and RS
Direct replacement part
Improves air flow to the turbo
Made from lightweight aluminium
High quality powder-coated black finish
AIRTEC Motorsport plaque
Includes all fixtures and fittings
As part of our expanding Focus Mk2 product range, AIRTEC Motorsport are proud to launch our 90mm enlarged induction pipe suitable for track or fast road use.
A direct replacement part that offers increases in performance and response, as well as sound and aesthetics, the enlarged induction pipe features a huge increase in overall internal volume to reduce restriction and improve flow to the turbo. The kit features a large AIRTEC Motorsport cotton air filter that mounts to an 80mm aluminium trumpet and a silicone coupler attaches it the enlarged induction pipe, which measures 90mm throughout, offering a 29% increase in diameter and capacity. This increases to 100mm diameter to suit aftermarket big turbo inlets.
Made from high quality aluminium for an improved look and feel, the larger pipe also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look.
The comprehensive package includes all silicone connectors, fixtures and fittings, which makes installation a simple task.
With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification for modified cars.
Please note: This kit does not feature a MAF sensor and so will not work with the OEM ECU. Only aftermarket ECU configurations that do not use a MAF sensor, such as Syvecs/ECU Master/SCS Delta will be compatible.
Specification:
Suitable for Mk2 Focus RS
Stock RS turbo or big turbo options
Huge improvement to turbo air flow
Made from lightweight aluminium
High quality powder-coated black finish
AIRTEC Motorsport plaque
Includes all fixtures and fittings
AIRTEC Part No: ATMSFO127
Ford Focus Mk2 Facelift Bonnet Lifter Kit
This kit is an extremely easy modification to make to your Focus,Replace the stock bonnet prop with the bonnet lifter kit .
Designed for Focus Mk2 facelift models
Kit includes:
2 x Gas-charged struts
2 x Bonnet hinge brackets
2 x Wing brackets
AIRTEC Motorsport Focus Mk2 ST/RS & Volvo C30 T5 Air-Con Delete Kit
For those looking to extract the very best performance from their Mk2 Focus ST/RS or Volvo C30 T5, the AIRTEC Motorsport air-con delete kit helps to reduce engine parasitic loss, improving response and horsepower, as well as reducing unwanted weight and removing clutter from the engine bay.
This comprehensive kit includes a carefully machined alloy pulley, to directly replace the air-con pump unit, along with specially crafted CNC machined brackets, new auxiliary belts and all of the fixtures and fittings required to safely remove the entire air-con system.
Please note: This is recommended for Motorsport use only and is not intended for road use.Sump bolt will need to be removed, air-con delete kit adds adequate pressure due to the 3 point fixing system.
Large Group A style cotton air filter, to fit multiple different applications. Fits the following models:
Focus Mk2 RS Group A induction kit
Focus Mk3 RS Stage 2 induction kit
Focus Mk3 ST250 Stage 2 induction kit
Toyota Yaris GR
TRUMPET NOT INCLUDED
Part no: ATIKFIL1
AIRTEC Motorsport MIL light cheater.
If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.
AIRTEC Motorsport 3.5″ downpipe for Focus MK2 ST/RS.
The AIRTEC Motorsport 3.5″ downpipe reduces down to a 3″ flange to fit the stock cat / aftermarket de-cat or sports cat.
Can be easily cut and modified to fit a larger flange.
Made to a high quality standard and all tubing is finished in brushed stainless steel.
Designed and finished in the UK
*This is a universal fitting product proven to give significant power gains as well as increased pops and bangs due to an improved flow of exhaust gases.*
We recommend this to be used with Stage 2 (ECU Software) but can be used with a standard car.
Supplied with all relevant gaskets and fixings.
Comes with downpipe locking bolts.
Manufactured from T304 grade stainless steel tube.
Formed using the finest mandrel bending machines.
We have a off the shelf answer to fuelling your high powered Focus RS Mk2, this fuel pump upgrade is a straight swap for your standard pump unit and utilises a state of the art 340 litres per hour fuel pump!
Tested at Devil Developments on 02/12/11
Increases fuel pressure
Increases brake horse power
Increased bhp reliability, even after 10 power runs!
Rolling road testing saw fuel pressure rise from 3.26 bar on standard pump to 3.57 bar on the ‘AIRTEC’ AS340LPH fuel pump & BHP gains of 7.8bhp! Testing was carried out on our 400bhp demo car, on higher spec cars with see these gains rise.
1 year no fault warranty – AIRTEC, fuelling your passion for performance!
Now fitted with the latest 340LPH fuel pump
Please note, we now only supply brand new fuel pumps.
If fitting to ST, you are required to bend fuel pump float (ST ONLY)
Only £495.95 on sale for set of 5 biggest injectors currently used in Focus RS Mk2, we have large UK stock for next day delivery RS Owners looking for 500bhp+ Features: Genuine, reliable Bosch injectors excellent response characteristics Robust Design High Impedance Low Impedance performance characteristics with high impedance compatibility
We have Large UK stock for next day delivery, these injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors.
Many tuners push these injectors to 6bar and higher.
Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors single hole high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization.
This results in lower BSFC and better idle quality than many injectors with less flow.
Features: Genuine, reliable Bosch Injectors Excellent response characteristics Robust Design High Impedance Low Impedance performance characteristics with High Impedance Compatibility RS Owners looking for 400bhp – 500bhp+
