Performance - Ford Focus MK2 (2004-2010)

Turbo to crossover hose for the Focus ST 225. Gloss Black, Race Red, Performance Blue normally kept in stock. Other colour hoses, made to order Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange, Purple, Vivid Pink, Ultimate Green Please allow 2-4 weeks for delivery.

Read more less

The AIRTEC Motorsport big boost pipe kit is a must for all remapped RS’, everything you need is included in the kit. Features: Hot side (Turbo to Intercooler) is made from 2.5″ light weight alloy and connected with 5 ply silicon hose joiners. Cold side (Intercooler to throttle body) we went for a 1 piece 2.5″ silicon hose, this means you have NO joins and can add to extra flow and increased power. Available with or without dump valve outlet. Will fit With the following Intercoolers AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! no modding required. Our 2.5″ hard pipe upgrade removes Ford’s 2.0″ restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increase’s over the standard Ford pipes and these gains were achieved by simply bolting on the kit. This kit is designed for BIG BHP Focus RS’ and will work best on 375bhp and over, was tested on our 400bhp demo car. All pipes have swaged ends to stop the pipes blowing off on BIG BHP Focus RS’. Fitting takes approx 1 hour. For Focus ST 225 – MUST Be fitted with 2.5″ outlets on intercooler. Stock ST is 2″.Will not fit Focus ST Stage 1/2 intercooler. Will fit focus ST Stage 3 intercooler.

Read more less

The AIRTEC Motorsport big boost pipe kit is a must for all remapped RS’, everything you need is included in the kit. Features: Hot side (Turbo to Intercooler) is made from 2.5″ light weight alloy and connected with 5 ply silicon hose joiners. Will fit the following intercoolers: AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5″ hard pipe upgrade removes Ford’s 2.0″ restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increase’s over the standard Ford pipes and these gains were achieved by simply bolting on the kit – including the additional cold side pipe. This kit is designed for BIG BHP Focus RS’ and will work best on 375bhp and over, was tested on our 400bhp demo car. All pipes have swaged ends to stop the pipes blowing off on BIG BHP Focus RS’. Fitting takes approx 1 hour. For Focus ST 225 – MUST Be fitted with 2.5″ outlets on intercooler. Stock ST intercooler is 2″.*Will not fit Focus ST Stage 1/2 intercooler. Will fit focus ST Stage 3 intercooler.

Read more less

At last, we have now released a full 70mm cold side hose for the Focus RS MK2! This hose will fit either a standard throttle body or an aftermarket uprated 70mm throttle body, expanding up to 70mm though the rest of the hose to then connect to most brands of intercooler with 63mm outlet including the standard OEM intercooler. Please select the option below for the size you require. (Standard Throttle Body size is 63mm) Please Note: This is a Symposer Delete Item Most uprated boost hoses are 2.5 inch (63mm). This boost hose is 70mm through the entire hose allowing faster airflow. Choose from, Green, Black, Blue, White or Red.  Will fit With the following Intercooler’s Airtec Stage 1 & Stage2 Pace Pro-Alloy Forge Mountune Ford OEM Direct replacement! no modding required. The Pro-Hose 70mm cold side pipe upgrade removes fords 2.0″ restrictive boost pipe.  Fitting takes 0.5 to 1 hours.

Read more less

TECHNICAL DATA Great addition to your ST, Fits all Pre-Face lift and Face lift models Deep induction note & lots of waste gate chatter No worrying about water ingress on low level filters, which is a concern for some ST owners Not content with fitting a huge group a cone filter we have also added a cold feed scoop which can aid Airflow into the filter & also doubles up as a protection if you have RS vents fitted Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green) Kit includes 1x Huge Group ‘A’ style cone filter 1x AS performance 80mm trumpet with cold feed scoop ‘powder coated satin black’ 1 x Pair of custom made silicon Pro-hose joiners ‘stainless clamps included’ AIRTEC two-piece ECU cover is required to fit this filter kit Add AS Alloy top induction pipe Please note, now supplied with AIRTEC Motorsport Black Cotton Filter.  Part No: ATIKFO9

Read more less

The 2.5" big boost pipe kit is a must for all remapped RSs, Everything you need is included in the kit. Features: Hot side (turbo to intercooler) is made from 2.5" light-weight alloy and connected with 5 ply silicone hose joiners. NEW! Now comes with 70mm coldside hose to fit standard size throttle body expanding up to 70mmPlease Note: This is a Symposer Delete Item Will fit With the following intercoolers AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5" hard pipe upgrade removes Ford's 2.0" restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increases over the standard Ford pipes and these gains were achieved by simply bolting on the kit.    This kit is designed for BIG BHP Focus RS' and will work best on 375bhp and over. All pipes have swaged ends to stop the pipes blowing off on BIG BHP Focus RS'.  Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay. Choose from options throttle body size:Standard Throttle Body  (63mm)Uprated Throttle Body (70mm) Fitting takes 1 - 2 hours. Please note: For Focus ST 225 - MUST Be fitted with 2.5" outlets on intercooler. Stock ST is 2".Will NOT fit Focus ST Stage 1/2 intercooler. WILL fit focus ST Stage 3 intercooler. Please Note: Pipework only available in pro-series black (not silver)

Read more less

The Ultimate alloy Turbo top induction pipe Mirror finish , the ultimate finishing touch to any engine bay! Now available in 3 different finishes, Pro-Series Satin Black, Polished Silver and the new Satin Silver (Motorsport Style Finish) Fitting takes about 20-30 minutes Registered Design Right number: 6033438

Read more less