Performance - Seat Ibiza MK4 (6J) 2008-2017

The Multiple Award-winning Kompact EM Series of Upgraded Diverter Valves are the world’s first genuine plug-and-play Upgrade solution for your factory diverter valve. Unplug and unbolt your OEM Valve, and install a Kompact EM Valve. No adaptors, hoses or extra assembly are required. The Kompact EM Valve Series from Turbosmart takes the motorsport-proven billet valve technology and adds an onboard proprietary solenoid system and internal pressure control channels for a simple plug-and-play valve with full OE integration and control. There are no reference hoses, separate solenoids and no fiddly bits – Just bolt-on and plugin! You can count on unmatched performance & reliability as a direct replacement for your factory diverter valve. The Kompact EM Valves overcome the common faults associated with plastic factory valves through our Boost-Balance Valve Design (The more boost you have, the better it seals), Positive Seal O-Ring on the Piston’s face and Billet Construction. No matter your application, the Kompact EM Series will hold more boost and be more responsive in any environment. Available In Dual Port: TS-0223-1091Plumback: TS-0223-1291Key Features Boost-Balance Valve TechnologyPatented integrated pressure controlTrue plug-and-play upgradeIntegrated proprietary high-temperature solenoid valveBillet construction with high-temperature o-ringsFitment available in Plumback or Dual Port optionsUSA Patent: 10,781,745AUS Patent: 2018253619 FITMENT: MAKE Model Variant HP Fuel Engine Year Range AUDI A1 8X1, 8XK 185HP Petrol (CAVE) 2011 - 2018 AUDI A1 8XA, 8XF 185HP Petrol (CAVE) 2011 - 2018 SEAT ALAHAMBRA 7N 150HP Petrol (1.4L) 2010 - 2019 SEAT IBIZA IV 6J1 150HP Petrol (1.4L) 2009 - 2015 SEAT IBIZA IV 6J1 180HP Petrol (1.4L) 2009 - 2015 SEAT IBIZA IV 6J5 150HP Petrol (1.4L) 2009 - 2015 SEAT IBIZA IV 6P1 (FACELIFT) 150HP Petrol (1.4L) 2015 - 2017 SEAT IBIZA IV 6P5 (FACELIFT) 150HP Petrol (1.4L) 2015 - 2017 SEAT IBIZA IV 6P5 (FACELIFT) 180HP Petrol (1.4L) 2015 - 2017 SEAT IBIZA IV ST 6J8 150HP Petrol (1.4L) 2012 - 2015 SEAT IBIZA IV ST 6P8 (FACELIFT) 150HP Petrol (1.4L) 2015 - 2017 SKODA FABIA 542 180HP Petrol (1.4L) 2010 - 2014 VOLKSWAGEN GOLF V 1K1 140HP Petrol (1.4L) 2006 - 2008 VOLKSWAGEN GOLF V 1K1 170HP Petrol (1.4L) 2005 - 2008 VOLKSWAGEN GOLF VI 517 160HP Petrol (1.4L TwinCharge) 2011 - 2016 VOLKSWAGEN GOLF VI 5K1 160HP Petrol (1.4L TwinCharge) 2008 - 2012 VOLKSWAGEN GOLF VI AJ5 160HP Petrol (1.4L TwinCharge) 2009 - 2013 VOLKSWAGEN POLO 6R, 6C 180HP Petrol (1.4L) 2010 - 2018 VOLKSWAGEN SHARAN 7N1, 7N2 150HP Petrol (1.4L) 2010 - 2019 VOLKSWAGEN TOURAN 1T1, 1T2 140HP Petrol (1.4L) 2006 VOLKSWAGEN TOURAN 1T1, 1T2 170HP Petrol (1.4L) 2006 VOLKSWAGEN TOURAN 1T1, 1T3 140HP Petrol (1.4L) 2007 VOLKSWAGEN TOURAN 1T1, 1T3 170HP Petrol (1.4L) 2007 VOLKSWAGEN TOURAN 1T1, 1T4 140HP Petrol (1.4L) 2008 VOLKSWAGEN TOURAN 1T1, 1T4 170HP Petrol (1.4L) 2008 VOLKSWAGEN TOURAN 1T1, 1T5 140HP Petrol (1.4L) 2009 VOLKSWAGEN TOURAN 1T1, 1T5 150HP Petrol (1.4L) 2009 VOLKSWAGEN TOURAN 1T1, 1T5 170HP Petrol (1.4L) 2009 VOLKSWAGEN TOURAN 1T1, 1T6 140HP Petrol (1.4L) 2010 VOLKSWAGEN TOURAN 1T1, 1T6 150HP Petrol (1.4L) 2010 VOLKSWAGEN TOURAN 1T1, 1T6 170HP Petrol (1.4L) 2010 VOLKSWAGEN TOURAN 1T3 140HP Petrol (1.4L) 2010 - 2015 VOLKSWAGEN TOURAN 1T3 150HP Petrol (1.4L) 2010 - 2015 VOLKSWAGEN TOURAN 1T3 170HP Petrol (1.4L) 2010 - 2015

Read more less

This is a performance enhancing induction kit for the VAG 1.2 & 1.4 TSI TFSI EA211 engine. This may fit other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Reduced turbo lag Turbocharger feels more responsive Enhanced BOV sounds What Does It Do? This induction kit delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated turbo inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

This is a performance silicone intake hose for 1.2 & 1.4 TSI TFSI EA211 engine. This kit fits other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Silicone inlet pipe Dyno results: max gains 5-7bhp (this may vary dependant on vehicle) What Does It Do? This induction silicone intake hose delivers increased air flow over the standard restrictive part. Whether this hose is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black silicone inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

This Performance intake kit is designed to fit the MK7 Volkswagen Golf, Audi, Seat Leon, and Skoda that have the EA211 - 1.4 TSI/TFSI engine. Features 70mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Ramair Foam Filter Black powder coated aluminium intake pipe PVC intake ducting Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi A3 (8V) 1.4 TFSI

Read more less

This performance intake kit is designed to fit the VW 1.0 TSI platform. For full compatibility please check list below. Features Easy to maintain with our filter maintenance kit – CK-003 Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Proram pleated filter Black powder coated aluminium intake pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015-2018 Audi A1 (8X) 1.0 TFSI 2016-2020 Audi A3 (8V) 1.0 TFSI 2017-2025 Seat Arona (KJ) 1.0 TSI 2016-2025 Seat Ateca (KH) 1.0 TSI 2015-2020 VW Caddy (MK4) 1.0 TSI 2014-2022 Skoda Fabia (MK3) 1.0 TSI 2015-2020 VW Golf (MK7) 1.0 TSI 2019-2025 Skoda Kamiq (NW) 1.0 TSI 2017-2025 Skoda Karoq (NU7/ND7) 1.0 TSI 2015-2020 Seat Leon (MK3) 1.0 TSI 2016-2020 Skoda Octavia (MK3) 1.0 TSI 2017-2025 VW Polo (AW) 1.0 TSI 2017-2019 Skoda Rapid (NH) 1.0 TSI 2016-2020 Audi Q2 (GA) 1.0 TFSI 2019-2025 Skoda Scala (NW) 1.0 TSI 2018-2025 VW T-Cross (MK1) 1.0 TSI 2019-2025 VW T-Roc (MK1) 1.0 TSI 2017-2019 Seat Toledo (MK4) 1.0 TSI 2015-2017 Seat Ibiza (MK4) 1.0 TSI 2018-2025 Seat Ibiza (MK5) 1.0 TSI

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Seat Ibiza Cupra performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back) these exhausts replace the first silencer, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Please Note - This package includes a "Race Pipe" which removes the first standard box. All relevant fittings and gaskets are supplied. Media Example of Seat Ibiza Cupra 1.8 sports exhaust (Cat-back - non-resonated). Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Seat Ibiza Cupra 1.8 performance exhaust is made in 3"/76.2mm pipework and fits from the turbo to the first box section and replaces the front pipe. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. (Except turbo gasket). Media Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Seat Ibiza Cupra performance exhaust is made in 2.5" / 63.5mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, first silencer, centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied (Except turbo gasket). Media Example of Seat Ibiza Cupra sports exhaust (Cat-back - non-resonated). Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Fits - 1.2 FR TSI (6J 105PS) 2010-15 Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Ibiza FR 1.2 performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back) these exhausts replace the first silencer, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied.  Press Release Enhancing the driving experience via a combination of power, weight, styling and acoustic tone is always top priority on the agenda when engineering any exhaust system at Cobra Sport and the system which has been developed here certainly ticks all of the boxes. Cobra Sport's experienced engineers were able to design an exhaust upgrade which balanced the need for improved gas flow without sacrificing back pressure. The results speak for themselves and certainly boost the car's credentials. The new Cobra Sport exhausts for the 1.2 Ibiza FR benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says "We are very excited to have developed the new cat back exhausts for the 1.2 litre engine building on the success experienced with the 1.4 FR model. The new Cobra Sport systems greatly improve the exhaust pitch and tone and add the sporty edge which was missing from the factory system. The non resonated cat back system offers the most dynamic upgrade recording a sound level of 84.8dB in the 4,000 rpm static test and is the exhaust configuration which perfectly achieves the sound we were looking for with this model. The resonated cat back exhaust upgrade includes a centre resonated section designed to reduce the sound levels and provide a purposeful but unobtrusive pitch perfect sound quality which in no way interferes with day-to-day drivability of the car." The styling of the system is finished off with a choice of twin 3" tailpipes in a highly polished inverted or inward rolled T304 stainless steel finish. A third option for a 5" x 3" oval slash cut tailpipe is also available for those looking for something a little different to compliment the Seat Ibiza aesthetics. Media Example of Ibiza FR 1.2 sports exhaust (cat-back system - non-resonated). Cobra Sport Exhausts VAG promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Example of Ibiza FR 1.2 sports exhaust (cat-back system - non-resonated). p>   Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Seat Ibiza Cupra Bocanegra performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back) these exhausts replace the first silencer, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Please Note - This package includes a "Race Pipe" which removes the first standard box. All relevant fittings and gaskets are supplied. Press Release Adding to their expanding range of performance exhaust systems is Cobra Sport's latest offering for the Seat Ibiza Cupra and Bocanegra 1.4 TSi. Enhancing the driving experience via a combination of power, styling and acoustic tone is always top priority on the agenda when engineering any exhaust system at Cobra Sport and the system which has been developed here certainly ticks all of the boxes. Testing was completed on a fully tuned version which had been given the benefit of an added induction kit, intercooler and re-map (which is required if removing the Catalyst anyway) and an impressive 28.4% increase was achieved in BHP, with torque gaining 23.6% when compared with measurements taken on the standard model without the upgrades. These outstanding results are achieved by designing the exhaust to obtain optimum gas flow while perfectly balancing the required back pressure taking full advantage of the car's tuning potential. The exhaust upgrade provides a more powerful but unobtrusive soundtrack and comes with all the usual refinements which you can expect from Cobra Sport, with the highest quality engineered and hand finished systems, ensuring a perfect fit and all completed in grade 304 non-magnetic stainless steel, which will last a lifetime. Media Example of Seat Ibiza Cupra sports exhaust (Cat-back - non-resonated). Example of Seat Ibiza Cupra sports exhaust (Cat-back - resonated). Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.    

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Ibiza FR performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back) these exhausts replace the first silencer, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Please Note - This package includes a "Race Pipe" which removes the first standard box. All relevant fittings and gaskets are supplied. Press Release Cobra Sport have been at it again, this time with an upgrade on the popular the Seat Ibiza FR. This super little hatchback really does benefit from the Cobra Sport treatment which provides improved drivability throughout the entire rev range, together with attractive tailpipe options. Two different versions of twin 3" round tailpipes are available or the larger single oval design which really enhances the car's visual appeal. Improvements in power and torque are immediately apparent once the exhaust is added, with a sharpened throttle response and an enhanced acoustic profile, all the result of adding specially designed free flowing silencers, which improve gas flow without sacrificing any of the required back pressure. A really useful weight saving of 37% is also achieved with the upgrade. The addition of the Cobra Sport exhaust really tells you what potential this car has got going for it and further tuning modifications would see a significant power boost. As with all Cobra Sport Exhausts, the system benefits from mandrel bent tube for the smoothest of gas flow, with advanced TIG welding on all joints and the use of grade 304 stainless steel throughout, even in fittings and joints, where on other systems a lesser quality mild steel is sometimes used. You can therefore be assured of only the best quality in a Cobra Sport exhaust system. Media Example of Ibiza FR sports exhaust (cat-back system - non-resonated).

Read more less

Fits - 1.4 TSI ACT FR (2014-15) 3 & 5 Door Models Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Ibiza FR 1.4 ACT performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back) these exhausts replace the first silencer, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release Enhancing the driving experience via a combination of power, weight, styling and acoustic tone is always top priority on the agenda when engineering any exhaust system at Cobra Sport and the system which has been developed here certainly ticks all of the boxes. Cobra Sport's experienced engineers were able to design an exhaust upgrade which balanced the need for improved gas flow without sacrificing back pressure. The results speak for themselves and certainly boost the car's credentials. The Cobra Sport exhausts for the 1.4 ACT Ibiza FR benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says "We are very excited to have developed a cat back exhaust for the 1.4 ACT model. The new Cobra Sport system greatly improve the exhaust pitch and tone and add the sporty edge which was missing from the factory system. The non resonated cat back system offers the most dynamic upgrade recording a sound level of 84.8dB in the 4,000 rpm static test and is the exhaust configuration which perfectly achieves the sound we were looking for with this model. The resonated cat back exhaust upgrade includes a centre resonated section designed to reduce the sound levels and provide a purposeful but unobtrusive pitch perfect sound quality which in no way interferes with day-to-day drivability of the car." The styling of the system is finished off with a choice of twin 3" tailpipes in a highly polished inverted or inward rolled T304 stainless steel finish. A third option for a 5" x 3" oval slash cut tailpipe is also available for those looking for something a little different to compliment the Seat Ibiza aesthetics. Media Before and After Sound Example - Non Resonated Cat Back Exhaust. Cobra Sport Exhausts VAG promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Fits - 1.2 FR TSI (6J Facelift) 2015 - 17 Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Ibiza FR 1.2 performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back) these exhausts replace the first silencer, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied.  Please Note: Certain models are shipped from factory with a single hanger and exhaust rubber on the standard back box. The Cobra Sport back box features an additional hanger, however for models shipped from factory without the extra hanger, this will be of no detriment to the fitment of the exhaust. Please see the final product photograph for referance Press Release Enhancing the driving experience via a combination of power, weight, styling and acoustic tone is always top priority on the agenda when engineering any exhaust system at Cobra Sport and the system which has been developed here certainly ticks all of the boxes. Cobra Sport's experienced engineers were able to design an exhaust upgrade which balanced the need for improved gas flow without sacrificing back pressure. The results speak for themselves and certainly boost the car's credentials. The new Cobra Sport exhausts for the 1.2 Ibiza FR benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says "We are very excited to have developed the new cat back exhausts for the 1.2 litre engine building on the success experienced with the 1.4 FR model. The new Cobra Sport systems greatly improve the exhaust pitch and tone and add the sporty edge which was missing from the factory system. The non resonated cat back system offers the most dynamic upgrade and is the exhaust configuration which perfectly achieves the sound we were looking for with this model. The resonated cat back exhaust upgrade includes a centre resonated section designed to reduce the sound levels and provide a purposeful but unobtrusive pitch perfect sound quality which in no way interferes with day-to-day drivability of the car." The styling of the system is finished off with a choice of twin 3" tailpipes in a highly polished inverted or inward rolled T304 stainless steel finish. A third option for a 5" x 3" oval slash cut tailpipe is also available for those looking for something a little different to compliment the Seat Ibiza aesthetics. Media Example of Ibiza FR 1.2 sports exhaust (cat-back system - non-resonated). Cobra Sport Exhausts VAG promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Example of Ibiza FR 1.2 sports exhaust (cat-back system - non-resonated).   Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Airtec has released their Seat Spot Style Intercooler, reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercoolers, we take a huge amount of pride in making sure our kits are finished to an Extremely high standard. Intercooler only – This intercooler will fit the following known applications (crash bar alterations maybe required to fit some models)Ibiza Mk4 1.9 130PD Diesel (full kit inc pipes coming soon!)Ibiza Mk4 1.8 Turbo (full kit inc pipes coming soon!)Skoda Fabia VRS Diesel (full kit inc pipes coming soon!)Polo GTI 1.8 Turbo AIRTEC Front mount Intercooler Features 1 x huge 60mm core intercooler with flowed cast end tanks, this means less welding and a stronger intercooler Can be adapted to suit a number of VAG applications Unbeatable value for money Proven Power Increase’s for Fast Road & Track Available in Satin Black only Airtec 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill Finished In Pro-Series Black only (not silver no more) In stock ready to ship, please note the intercooler does not come with any fitting kit (brackets) or pipework. Intercooler Volume Capacity (The amount of charged air that the intercooler can hold)AIRTEC: 3.45 litresApproximate Dimensions:Thickness – 60mmWidth – 525mmHeight – 378mmAIRTEC part number: ATINTVAG3

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these.  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less