Performance - Ford Focus MK2 (2004-2010)

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the  Show Day Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK by CEUK, this lightweight and secure Stainless Steel prop is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets / doors / boots open, whether or not your vehicle has gas lift struts. Crafted from Air Grade Stainless Steel and featuring precision-machined billet aluminium components with stainless steel fixings; then finished in a coloured polyolefin coating, the Show Day Prop offers both functionality and a sleek, professional appearance. Shaft Made from Stainless Steel, the shaft is ultra-thin at just 6mm and lightweight, with no wrapping or skinning. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. Lower Fixing The lower fixing features a precision bend, with a rubber cap to prevent scratches or damage to the vehicle. Extendability: The upper fixing has a 4cm / 40mm extendable thread, which can be raised to give a longer prop. Sizing Length of Prop Section only: 500mm / 50cm Total length when fully extended: 570mm / 57cm Adjustment Capability when installed: 53cm / 57cm

Read more less

The ZERONINE Design lower pitch control mount for Mk2 and Mk3 Focus ST and RS models reduces the amount of engine roll / movement experienced during hard acceleration and gear changes. It also helps reduce 'wheel-hop', which is particularly evident in vehicles with increased power and torque outputs. Correct design and material selection is essential with a product such as this to ensure NVH (Noise, Vibration and Harshness) doesn't spoil your overall enjoyment and general driving pleasure. Product Features: Engineered and optimised for Focus ST and RS models High quality 6000 series billet aluminium body Bespoke size and shore hardness polyurethane bushes Reduction in engine movement  Minimal effect on NVH Compatible Models: Mk3 Focus RS 2.3-litre EcoBoostMk3 Focus ST 2-litre EcoBoostMk2 Focus ST 2.5-litre Mk2 Focus RS 2.5-litre

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

  Tidy up your interior with our set of 4 seat rail end covers (for the front of the front seats only). Please note these are to fit the seat rail ends from the Recaro seats fitted in the Mk2.5 Focus RS. Available in a selection of plastic colours/finishes. 'Speed Shapes' shown for colour demonstration purposes only. Please note smooth for painting plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

The AIRTEC Motorsport Air-Ram Scoop and RS Slam Panel for Group A induction kit just got better! Now offered with an AIRTEC Motorsport-branded RS slam panel that fits both pre-facelift and facelift models. The Group A open air filter kit has been a great addition to the ST225 product range through the years, however ensuring it has a constant feed of cold air feed can prove tricky. AIRTEC Motorsport has come up with the ideal solution with our Air-Ram diverter scoop that has a factory appearance with in the engine bay but works to continually force cold air towards the filter, ensuring consistent flow and performance. The optional AIRTEC Motorsport slam panel fits all ST models and works with the Air-Ram diverter scoop for the perfect combination. Please note, this currently only fits AIRTEC’s Group A induction kit. Kit includes: 1x Alloy fabricated Air-Ram feed finished in Pro-Series satin black 3x Billet alloy spacers and stainless-steel fittings Optional AIRTEC Motorsport RS slam panel that fits both pre-facelift and face lift models AIRTEC part no: ATMSFO45

Read more less

🔧 Bespoke Dress-Up Washer Kit – M6 Universal Fitment Turn heads at shows and under the hood with CEUK’s Bespoke Dress-Up Kit – one of our most iconic and sought-after creations! 👑 Why spend a fortune creating a flawless engine bay, only to leave rusty, factory screws in place? 😬 We’ve solved that problem with this anodised aluminium washer and stainless steel bolt combo, designed to replace your standard screws and give your car that clean, custom look. ✅ What Makes This Kit Special? 🛡️ Premium Grade Anodised Washers – Fade-resistant & corrosion-proof 🔩 Stainless Steel Screws – Will never rust or flake like OEM 🌈 Choose Your Colour – Match your theme or make it POP 🧰 Direct Replacement – No fiddling or modding required ⚙️ Tailored Quality – Engineered to OE standards for a snug fit 🧼 Show-Ready Finish – Polished bay vibes guaranteed 📦 What’s in the Kit? 10x Premium Anodised Aluminium Washers 10x Stainless Steel Screws (M6 Fitment) 🧩 Ideal For: Headlight mounts Headlight covers Slam panels General bay dressing ⚠️ Fitment Notice This is a universal M6 kit. Please confirm your existing screws are M6 before ordering. Not sure? Contact our team – we’re here to help. 💬 Why CEUK vs eBay? eBay kits may look similar, but they’re not.Those kits come with cheap, low-quality fasteners that corrode or strip after a few uses. CEUK kits are engineered in the UK, made from aircraft-grade aluminium and true stainless steel, designed to last as long as your pride and joy. 🛠️ Need More or Something Custom? We offer custom colours, extra screws, or specific fitments. Just message us for a bespoke setup!

Read more less

Genuine Ford/Castrol Magnatec Professional 5W20 Fully Synthetic Oil 1L For Ford EcoBoost engines which requires oil that meets SAE 5W-20; WSS-M2C948-B specifications. Used on servicing for the Focus & Fiesta Range

Read more less

Description  Please note if you select the 'RS' variant two of the panels will be 'frames' shaped around the factory fitted bonnet vents.  If you select 'All Other Variants' these parts will be supplied as full plates Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 14 piece Under Bonnet Panel set. Supplied in a range of plastic finishes, these parts are available with or without double sided tape as some customers prefer to fit the parts with sealant or their own adhesive tape.   CNC machined from high quality plastic these panels are much lighter than the stainless steel mirrored plates on the market reducing the risk of them dropping off and also the additional weight on the bonnet. These parts should fit any variant of Mk2.5 Focus but please double check the underside of your bonnet before purchasing and contact us if unsure. These parts are made from 2mm plastic material so can easily be cut if you have had aftermarket bonnet vents fitted. Please note the reflective finish on the Chrome variants may be slightly different to other metal products on the market - please see photos.   Guaranteed fit for Ford Focus Mk2.5 Ford Focus Mk2.5 Diesel Ford Focus Mk2.5 RS Ford Focus Mk2.5 ST

Read more less

Direnza suspension mounts: where exceptional engineering meets incredible performance. Manufactured from CNC billet aluminium, Direnza mounts are designed and developed in-house using sophisticated CAD techniques. Once fitted, Direnza suspension mounts will improve your vehicles ride and handling characteristics thanks to their premium quality construction. Their rubber mounts and poly bushes are far stronger than OEM spec, and unlock previously untapped potential in your car. Fitment Ford Focus MK2 ST2 ST225 2005-2011 models Please note – Uprated engine mounts will increase vibrations felt through the cabin and as such are intended for track use Product Category Other Part Number DZGM002

Read more less

Ford Focus Mk2 Facelift Bonnet Lifter Kit This kit is an extremely easy modification to make to your Focus,Replace the stock bonnet prop with the bonnet lifter kit . Designed for Focus Mk2 facelift models Kit includes: 2 x Gas-charged struts 2 x Bonnet hinge brackets 2 x Wing brackets

Read more less

AIRTEC Motorsport Focus Mk2 ST/RS & Volvo C30 T5 Air-Con Delete Kit For those looking to extract the very best performance from their Mk2 Focus ST/RS or Volvo C30 T5, the AIRTEC Motorsport air-con delete kit helps to reduce engine parasitic loss, improving response and horsepower, as well as reducing unwanted weight and removing clutter from the engine bay. This comprehensive kit includes a carefully machined alloy pulley, to directly replace the air-con pump unit, along with specially crafted CNC machined brackets, new auxiliary belts and all of the fixtures and fittings required to safely remove the entire air-con system. Please note: This is recommended for Motorsport use only and is not intended for road use.Sump bolt will need to be removed, air-con delete kit adds adequate pressure due to the 3 point fixing system.

Read more less

AIRTEC Motorsport Dump Valve Symposer Bung Aluminium finish, 25mm diameter bung or 33mm diameter bung Suitable for Mk2 Focus ST / Mk2 Focus RS

Read more less

AIRTEC Motorsport oil breather top plate for Focus MK2 ST & RS. Billet CNC machined plate designed to replace the stock oil breather housing. This kit allows you to replace  the original plastic top and replace it with the AIRTEC Motorsport oil breather housing top. Registered Design Right Design number: 6093146

Read more less

AIRTEC Motorsport complete breather kit for Focus MK2 ST & RS. Designed to help reduce the risk of split diaphrams on the 2.5 turbo engine that suffers with oil filter and breather issues, common on modified cars. Includes a full fitting kit with Pro Hoses and everything ready to fit! Features: AIRTEC Motorsport breather top plate AIRTEC Motorsport oil catch can New oil filter New O-ring seals Pro Hoses silicone hose kit All fittings and fixings ready to fit Complete fitting instructions

Read more less

AIRTEC Motorsport Power Steering Tank for Focus Mk2 – with Sight Glass and Cap Made from lightweight alloy, the AIRTEC Motorsport power steering tank is a direct replacement item that replaces the standard plastic item that can become brittle over time. The tank also features a sight glass to check the level and comes complete with a cap. Finished in Pro-Series black only with a silver cap, the tank completes the aesthetic look of a Mk2 Focus engine bay perfectly. Registered Design Right number: AIRTEC part number: ATMSFO109

Read more less

Replacement Blue Header Tank Cap to fit all AIRTEC Motorsport header tanks.

Read more less

The perfect finishing touch to your Focus RS MK2 – Machined Finish Replaces Ford’s ugly Black Hexagonal posts with stainless steel polished items, come complete with stainless fittings. Fitting takes only minutes – designed with a cut out in the posts for a 10mm spanner to neatly fit into the groove, for easy installation

Read more less

Now available is our stunning performance inlet manifolds painted in the following solid colours to match your car – Gloss Black, Frozen White and Colarado Red We have taken more time than most perfecting our manifold to what you see here. We tested several designs, which include a square to tapered manifold that unfortunately didn’t work, and then our Gen2 design finally got the go ahead after months of testing. After completion, we found there was more gains to be made and instead of selling a manifold for the sake of getting sales, we held off the release while our development technicians matched the inlet manifold ports to the lower manifold ports – we felt the difference immediately. Features: Increase in BHP & Torque, expect to see gains from 5 – 10 bhp peak & 20 to 40 lb ft torque. We saw up to 25 bhp mid range gains on our tests. Heat treated for 36 hours & then pressure tested to 56 psi to ensure maximum strength Won’t crack or burst like Ford OEM plastic manifold Unique & stunning design, by far the best looking manifold available CNC Inlet ports to match lower section of the intake manifold ‘Injector side’ only one other cast manifold offers this critical design feature Value for money “You can feel the difference when fitted!” – This is what our customers are telling us time and time again. We are pleased to announce we supply a 12.5mm metal push fitting with every AS performance manifold. Registered Design Right number: 6041778 AIRTEC Part No: ATMSFO5

Read more less

Now available is our stunning performance inlet manifolds painted in the following metallic colours to match your car – Ultimate Green, Performance Blue and Electric Orange  We have taken more time than most perfecting our manifold to what you see here. We tested several designs, which include a square to tapered manifold that unfortunately didn’t work, and then our Gen2 design finally got the go ahead after months of testing. After completion, we found there was more gains to be made and instead of selling a manifold for the sake of getting sales, we held off the release while our development technicians matched the inlet manifold ports to the lower manifold ports – we felt the difference immediately. Features: Increase in BHP & Torque, expect to see gains from 5 – 10 bhp peak & 20 to 40 lb ft torque. We saw up to 25 bhp mid range gains on our tests. Heat treated for 36 hours & then pressure tested to 56 psi to ensure maximum strength Won’t crack or burst like Ford OEM plastic manifold Unique & stunning design, by far the best looking manifold available CNC Inlet ports to match lower section of the intake manifold ‘Injector side’ only one other cast manifold offers this critical design feature Value for money “You can feel the difference when fitted!” – This is what our customers are telling us time and time again. We are pleased to announce we supply a 12.5mm metal push fitting with every AS performance manifold. Registered Design Right number: 6041778

Read more less

AIRTEC Motorsport Focus Mk2 Two-Piece ECU Holder With the cost of a genuine Ford ECU cover regularly increasing, AIRTEC Motorsport are proud to launch its own direct replacement design. Made from high-quality, injection-moulded plastic and finished in smooth satin black, our two-piece holder looks and feels very similar to the genuine Ford item, but at far less cost. The intricate design means a perfect fit and features an AIRTEC cooling cut-out and embossed logo for a real OEM+ look that will compliment any Mk2 Focus ST/RS engine bay. It can be fitted with our hugely popular Focus ST Group ‘A’ filter kit, as well as other custom induction kits, and is secured in place using the original OEM fittings. AIRTEC part no: ASCOV1

Read more less

Tidy up your engine bay with one of our new domed Proform Coolant Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/ hydrodipped. Also available in OE style textured plastic, and range of coloured plastics including gloss black plastic and carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk 6/7/8 Fiesta and Mk 2/3/4 Focus models. NB: Please note the raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with one of our newly revised domed Proform Brake Fluid Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all derivatives of the Mk6/7/8 Fiesta and Mk2/3/4 Focus models. NB: Please note smooth plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Fuse Box Cover. Available in smooth plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A bespoke and registered design to us, the item fits over the top of your existing fuse box cover, hiding the logos and untidy clips. The tops are curved so when painted create a great reflective surface. Fits all Mk2 and Mk3 Focus models but please compare the photos with the shape of the fuse box on your vehicle before purchasing the item to be certain. Also available as part of our three piece Dress Up Kit. NB: Please note raw items may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Engine Bay coolant tank cover. Supplied in a choice of finishes. Raw plastic items come smooth and ready to be prepped and painted/hydrodipped. We also offer the OEM textured plastic finish for that factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the coolant tank cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print and will really make your engine bay stand apart from the rest.  Fits all Focus Mk2/2.5 Models inc ST and RS NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less