ITG Filters

ITG Air Filter to suit Ford Fiesta Mk 8 ST 1.5 EcoBoost & 1.0 EcoBoost from 04/2018 onwards. mk2 puma st ITG Air Filter Code WB280 measures 161 x 217mm Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering!

Read more less

Although good enough for a standard engine, the Clio RS200 standard airbox becomes restrictive when the power levels have been pushed up by a re-map and other modifications. To get the best performance from your Clio RS200, ITG have developed a new intake. The kit uses a conical filter housed in a high quality aluminium airbox.  The increased surface area of the filter greatly improves the flow and filtration characteristics of the induction system, providing gains in power, torque, throttle response and induction noise. Testing has shown gains of up to 15bhp. AluminiumPart No: ARAB65/73FReplacement Filter Part No:JC60/73FC Carbon FibrePart No: RAB65CRS200Replacement Filter Part No: JC60/73FC

Read more less

ITG Ford Fiesta ST180 direct replacement panel filter.   The Tri-Foam System Why foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum Air Flow the ability to allow air to pass through without causing a large drop in pressure. Cleaning Efficiency the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust Load-up Tolerance the capability to absorb a large amount of dust without reducing air flow capacity.

Read more less

ITG Maxogen PRO Intake System Replacement Head For The Ford Fiesta ST 180 Mk7 Damaged your Intake System Filter Head? No problem, you can purchase a replacement here at AET Motorsport. Contact a member of the team for any additional information you require. T: 01924 228042  |  E: info@aetmotorsport.com 

Read more less

The ITG induction kit for the Ford Focus RS Mk2 has a unique design that sources cool air from an area of positive pressure at the front of the vehicle.  Testing has shown gains of 20hp over the standard induction system on a re-mapped car. Aside from the increase in power, there are improvements with throttle response and an increase in torque.

Read more less

Although adequate for a standard engine, the Focus ST's standard air box can be found lacking when the power levels have been pushed up by a re-map and other modifications. To help improve the performance of your Focus ST, ITG have developed a new intake. The ITG kit increases the filter area by over 50% and uses high quality three layer foam to improve flow and filtering characteristics.  The air intake is mounted down behind the bumper, well away from any power robbing heat under the bonnet.  Aside from the increase in power, there are improvements with throttle response and a pleasing, yet unobtrusive increase in intake noise.   2012 - 2015 ST3 Pre Facelift shown - Part No: STAB99FST3 Replacement Filter Part No: ARAB65/78F   2015 - 2018 ST3.5 Facelift also available - Part No: STAB99FST3.5 Replacement Filter Part No: ARAB65/78VAGF

Read more less

The Megane 250/265’s standard airbox can be found lacking when the power levels have been pushed up by a re-map and other modifications. To get the most from your Megane, ITG have developed a new intake which so far in testing has shown gains of up to 10bhp. The filter is mounted down behind the bumper, well away from any power robbing heat under the bonnet.  Aside from the increase in power, there are improvements' with throttle response and a pleasing, yet unobtrusive increase in intake noise. Part No: COASRM250Replacement Filter Part No: JC60/67PLUS20

Read more less

To get the most from your Clio 197, ITG have developed a new cold air intake system. The air intake is mounted down behind the bumper, well away from any power robbing heat under the bonnet.  Aside from the increase in power, there are improvements with throttle response, torque and an increase in intake noise. AluminiumPart No: ARAB65RC197Replacement Filter Part No: ARAB65/67F Carbon FibrePart No: RAB65RC197Replacement Filter Part No: JC60/67FCB

Read more less

ITG Filters Panel Air Pro Filter for the Toyota Yaris GR. The ITG Panel Air Filter for the Toyota Yaris GR is a cheap and simple upgrade for the Yaris GR. The ITG Air Filter is a direct replacement for the restrictive OEM filter found in the stock models. Replacing the stock filter for the ITG filter results in an increase of airflow, while maintaining high quality filtration.  ITG Filters use foam in their filters rather than paper, which is what most OEM Filters are made from, because it allows for optimum airflow and filtration. Foam achieves optimum airflow, cleaning efficiency, and dust load tolerance, over their paper counterparts.  Key Features: - Increased Airflow  - Tri-Foam filtration. - Increase power output. - Hand washable & re-usable.  - Lasts 5x longer than paper filter. - Dust load tolerance.    ITG Filters are one of the leading manufactures of performance air filters. Their dedicated research and testing has built up their reputation over the years. Their Tri-Foam filter design is unmatched. Check out the graph below from ITG to see how their foam compares to other filter designs.

Read more less

ProfilterOver the years, itg have created the lightest, most capable filters for all fields of motorsport, from Formula 1 to the World Rally Championship.The same design skills, advanced technology and attention to detail are also used to produce our Profilter range of high grade replacement filters for both road and competition use.

Read more less

ITG Universal Aluminium Air Box ARAB54 (Up To 200BHP) ITG Maxogen Air Box ARAB54. ITG have been developing their range of Universal Air Boxes for over 20 years. These revolutionary kits enable cold, dense air to reach the fuel metering unit more efficiently and can, in some cases, deliver as much as 9% more effective peak power at the wheels. This ARAB54 Air Box is good for engines up to 200BHP. The ARAB54 Air Box is supplied with a powder coated Black spun aluminium Air Box and ITG Maxogen filter inside. The patented design of the Air Box, which features a large radiused induction trumpet, increases airflow which recovers air pressure from air velocity, filling a plenum volume around the large surface area of the internal filter. The induction trumpet accepts 76mm I.D. hose.Please click on the Technical Info tab above the product image to view a PDF of the dimensions of the ARAB54 Air Box.Available to suit 60 or 70mm I.D. hose, please select your required size before placing the item in your basket. 

Read more less

ITG Maxogen Air Box ARAB65. ITG have been developing their range of Universal Air Boxes for over 20 years. These revolutionary kits enable cold, dense air to reach the fuel metering unit more efficiently and can, in some cases, deliver as much as 9% more effective peak power at the wheels. This ARAB65 Air Box is good for engines up to 300BHP.The ARAB65 Air Box is supplied with a powder coated Black spun aluminium Air Box and ITG Maxogen filter inside. The patented design of the Air Box, which features a large radiused induction trumpet, increases airflow which recovers air pressure from air velocity, filling a plenum volume around the large surface area of the internal filter. The induction trumpet accepts 102mm I.D. hose.Please click on the Technical Info tab above the product image to view a PDF of the dimensions of the ARAB65 Air Box.Available to suit various diameter hoses, please select your required size before placing the item in your basket

Read more less