Price is for one strut / prop
Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors
Pro Props Carbon Fibre Bonnet Prop
Introducing the Show Day Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK by CEUK, this lightweight and secure Stainless Steel prop is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets / doors / boots open, whether or not your vehicle has gas lift struts.
Crafted from Air Grade Stainless Steel and featuring precision-machined billet aluminium components with stainless steel fixings; then finished in a coloured polyolefin coating, the Show Day Prop offers both functionality and a sleek, professional appearance.
Shaft
Made from Stainless Steel, the shaft is ultra-thin at just 6mm and lightweight, with no wrapping or skinning.
Upper Fixing
Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties.
Lower Fixing
The lower fixing features a precision bend, with a rubber cap to prevent scratches or damage to the vehicle.
Extendability:
The upper fixing has a 4cm / 40mm extendable thread, which can be raised to give a longer prop.
Sizing
Length of Prop Section only: 500mm / 50cm
Total length when fully extended: 570mm / 57cm
Adjustment Capability when installed: 53cm / 57cm
CEUK StealthMag™ Number Plate Mount Kit
Clean. Secure. Tool-Free.
Take your show plate setup to the next level with the CEUK StealthMag™ Number Plate Mount Kit — the ultimate no-drill, no-screw solution for a flawless finish. Designed for performance, simplicity and style, this magnetic mounting system keeps your number plate perfectly aligned and instantly removable for shows, meets and detailing.
⚙️ Key Features
Ultra-Strong Magnetic Hold – Industrial-grade neodymium magnets with 3M VHB adhesive ensure your plate stays firmly in place, even at speed.
Stealth Design – Achieve a seamless, floating look with no visible screws, bolts or brackets.
Quick-Release Function – Remove or swap plates in seconds — ideal for show cars, photo shoots and garage use.
No Drilling Required – Protects your bumper and plate from unnecessary holes or damage by using your existing plate fixture holes.
Durable Construction – High-quality coated magnets resist corrosion, moisture and heat for long-lasting performance.
Universal Fit – Works with all standard UK plates.
📦 What’s Included (1x Kit is for 1x Number Plate)
2 × Magnetic Mounts (with 3M VHB pads)
2 × Metal Receivers (for plate attachment)
2 × Fixing Screws (optional use)
Alcohol Wipe & Fitting Guide
Using a show plate? Add on the additional magnets so you can swap the plates easily!
🚗 Why Choose CEUK StealthMag™
Engineered for enthusiasts who demand the cleanest look possible — no visible screws, no frames, no fuss.Get that show-ready, ultra-sleek aesthetic that enhances your car’s lines and keeps your plates secure yet removable at any time.
Premium Road-Legal Number Plates – Fully Compliant & Professionally Made
Supplied as 1 White and 1 Yellow (Front & Rear) Plate
Hex / Lambo Number Plate
Add aggression to your vehicle, the corners are cut off using our Top of the range laser cutter to give an impressive style!
Upgrade your vehicle with our high-quality, fully legal number plates, manufactured to meet all UK road and DVLA standards. Whether you're replacing damaged plates or customising your vehicle with a clean, fresh look, our plates are the perfect choice.
✅ Fully Road Legal – Produced in strict accordance with the latest UK regulations, including spacing, font, and reflective materials. Suitable for MOT and road use.
✅ DVLA-Approved Materials – Made using industry-standard reflective acrylic and durable components, ensuring visibility, weather resistance, and long-lasting quality.
✅ BS AU 145e Compliant – Our plates are manufactured to comply with the current British Standard, including supplier details and BS number printed as required.
✅ Customisable – Choose from Full Size or 16 Inch Shortened (Please Note: Whilst the shortened is smaller, all spacing is correct and remains legal).
✅ Fast Turnaround – Quick production and dispatch with the aim to dispatch on the Next Working Day.
📌 Important Note: Proof of ownership and ID will be required before we can process and dispatch your plates. This is a legal requirement for all number plate suppliers.
All Number Plates come with "CEUK - HD8 9WL" in the center, as well as the BSAU code in the bottom right. These are Pre Printed onto the plates and can not be removed
Order with confidence – Whether it's for a car, van, motorbike, or trailer, our number plates combine style, legality, and reliability.
Please note: Shortened 16 inch plates can only fit a maximum of 6 digits, if your plate is 7 digits unfortunately this can not be supplied as shortened.
Questions or Special Requests? Our team is happy to help. Simply drop us an email or WhatsApp message!
All Number plates will be supplied with the Car Enhancements UK "CEUK" Logo text, Our Manufacture Post code and BSAU Number as per legal requirements.
Premium Road-Legal Number Plates – Fully Compliant & Professionally Made
Supplied as 1 White and 1 Yellow (Front & Rear) Plate
Pyramid Number Plate
A Pyramid plate uses 3mm Acrylic gloss black letters, topped with a further 3mm Gloss Black letter inner placed over the top to create the emphasis of a raised 3d look on the letter
Upgrade your vehicle with our high-quality, fully legal number plates, manufactured to meet all UK road and DVLA standards. Whether you're replacing damaged plates or customising your vehicle with a clean, fresh look, our plates are the perfect choice.
✅ Fully Road Legal – Produced in strict accordance with the latest UK regulations, including spacing, font, and reflective materials. Suitable for MOT and road use.
✅ DVLA-Approved Materials – Made using industry-standard reflective acrylic and durable components, ensuring visibility, weather resistance, and long-lasting quality.
✅ BS AU 145e Compliant – Our plates are manufactured to comply with the current British Standard, including supplier details and BS number printed as required.
✅ Customisable – Choose from Full Size or 16 Inch Shortened (Please Note: Whilst the shortened is smaller, all spacing is correct and remains legal).
✅ Fast Turnaround – Quick production and dispatch with the aim to dispatch on the Next Working Day.
📌 Important Note: Proof of ownership and ID will be required before we can process and dispatch your plates. This is a legal requirement for all number plate suppliers.
All Number Plates come with "CEUK - HD8 9WL" in the center, as well as the BSAU code in the bottom right. These are Pre Printed onto the plates and can not be removed
Order with confidence – Whether it's for a car, van, motorbike, or trailer, our number plates combine style, legality, and reliability.
Please note: Shortened 16 inch plates can only fit a maximum of 6 digits, if your plate is 7 digits unfortunately this can not be supplied as shortened.
Questions or Special Requests? Our team is happy to help. Simply drop us an email or WhatsApp message!
All Number plates will be supplied with the Car Enhancements UK "CEUK" Logo text, Our Manufacture Post code and BSAU Number as per legal requirements.
Premium Road-Legal Number Plates – Fully Compliant & Professionally Made
Supplied as 1 White and 1 Yellow (Front & Rear) Plate
Ghost Number Plate
Please note: This plate is NOT a Ghost plate in that it stops your vehicle from being flashed by cameras, All of our plates are 100% legal and can be picked up by ANPR & Speed Cameras
A ghost plate uses 3mm Acrylic gloss black letters, topped with a further 3mm Gloss Black letter outline placed over the top to create the emphasis of a border on the letter
Upgrade your vehicle with our high-quality, fully legal number plates, manufactured to meet all UK road and DVLA standards. Whether you're replacing damaged plates or customising your vehicle with a clean, fresh look, our plates are the perfect choice.
✅ Fully Road Legal – Produced in strict accordance with the latest UK regulations, including spacing, font, and reflective materials. Suitable for MOT and road use.
✅ DVLA-Approved Materials – Made using industry-standard reflective acrylic and durable components, ensuring visibility, weather resistance, and long-lasting quality.
✅ BS AU 145e Compliant – Our plates are manufactured to comply with the current British Standard, including supplier details and BS number printed as required.
✅ Customisable – Choose from Full Size or 16 Inch Shortened (Please Note: Whilst the shortened is smaller, all spacing is correct and remains legal).
✅ Fast Turnaround – Quick production and dispatch with the aim to dispatch on the Next Working Day.
📌 Important Note: Proof of ownership and ID will be required before we can process and dispatch your plates. This is a legal requirement for all number plate suppliers.
All Number Plates come with "CEUK - HD8 9WL" in the center, as well as the BSAU code in the bottom right. These are Pre Printed onto the plates and can not be removed
Order with confidence – Whether it's for a car, van, motorbike, or trailer, our number plates combine style, legality, and reliability.
Please note: Shortened 16 inch plates can only fit a maximum of 6 digits, if your plate is 7 digits unfortunately this can not be supplied as shortened.
Questions or Special Requests? Our team is happy to help. Simply drop us an email or WhatsApp message!
All Number plates will be supplied with the Car Enhancements UK "CEUK" Logo text, Our Manufacture Post code and BSAU Number as per legal requirements.
Racingline R-06 8.5J x 18inch Alloy Wheel Set - Gloss Gunmetal Grey
THIS LISTING IS FOR A SET OF FOUR ALLOY WHEELSThe RacingLine VWR R-06 18" Flow-Formed Alloy Wheel is the perfect balance of timeless design, lightweight engineering, and uncompromising strength. Designed in an 8.5 x 18” size with an ET44 offset, the R-06 delivers both performance and style, whether for the challenges of daily driving or the demands of the track.
Precision Flow-Formed ConstructionCrafted using advanced flow-forming technology, the barrel of the wheel is spun under intense heat and pressure to refine the aluminium’s grain structure. This process produces a wheel that is significantly stronger and lighter than traditional cast wheels, enhancing handling, acceleration, and efficiency without compromising durability.
Performance-Ready DesignAt just 9.9kg (21.3lbs) per wheel, the R-06 achieves the ideal balance between weight savings and the robust strength required for long-lasting road and track use.
Perfect Fitment for VWG PlatformsWith a fitment of 8.5 x 18” ET44 and 5x112 PCD, the VWR R-06 is tailored for VWG MQB, MQB EVO, and A5 platform vehicles. The 18” diameter is popular for many drivers, chosen to optimise both road and track performance by allowing a squarer tyre profile and improved clearance without the risk of rubbing.
Developed to exceed OEM standards, each wheel is rigorously tested for impact resistance, structural fatigue, load rating, and geometric accuracy. Maximum load capacity is an impressive 560kg, certified to ISO 7141 standards.
Notes:
8.5J x 18"
5 x 112 PCD
ET44 Offset
Weight: 9.9kg / 21.3lb per wheel
RacingLine Centre Caps Included
Confirmed Fitment:
VOLKSWAGEN
> VW Golf 8 & 8.5 2020+> VW Golf 7 & 7.5 2013-2020> VW Passat B8 2015+> VW Arteon 2017+> VW T-Roc 2017+> VW Golf 5 2005-2008> VW Golf 6 2008-2014> VW Scirocco 2008-2017> VW Jetta / GLI 5 2005-2011> VW Jetta / GLI 6 2011-2018> VW Jetta / GLI 7 2018+ AUDI
> Audi S3 8Y & 8Y.2 2020+> Audi A3 8Y & 8Y.2 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TFSI 8V 2015-2017> Audi TT 3 8S 2014+> Audi SQ2 2018+> Audi S3 8P 2006-2012> Audi A3 8P 2003-2012> Audi TT II 8J 2006-2014 SEAT / CUPRA
> Cupra Leon 4 & 4.5 FW 2020+> SEAT Leon III 5F 2015-2020> SEAT Leon II 1P 2005-2012> Cupra Formentor 2020+> Cupra Ateca 2018+ SKODA
> Skoda Octavia IV NX 2020+> Skoda Octavia III 5E 2014-2020> Skoda Octavia II 1Z 2004-2013
Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!
Even better driving dynamics and more exciting looks: H&R TRAK+ wheel spacers make your car even sportier! By moving the wheel out from the hub, TRAK+ wheel spacers widen the stance of the vehicle and lower its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you’ve been looking for. Like all of H&R’s street-engineered products, H&R TRAK+ wheel spacers are certified by the German Technical Inspection Agency (TÜV). H&R also has the correct wheel bolts or nuts to install TRAK+ wheel spacers on most cars, with original or aftermarket wheels.
40mm overall Axle spacers
High strength, light weight aluminum/magnesium alloy
CNC machined
Anodized for optimum corrosion protection
Available for most domestic and imported automobiles
For use with original or aftermarket wheels (Studs may need shortening if aperture in rear of alloy wheel is not sufficient for clearance)
Compatible with all suspension designs
TUV approved
SPECIFICATIONS
Track widening per axle [mm]
40
Thickness [mm]
20
Number of Holes
5.0
Bolt Hole Circle Ø [mm]
112
Centering Diameter [mm]
57.1
Colour
Black
Registration Type
with TÜV® certificate
Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!
Premium Road-Legal Number Plates – Fully Compliant & Professionally Made
Supplied as 1 White and 1 Yellow (Front & Rear) Plate
4D Number Plate
A 4D Number plate uses 3mm or 5mm thick gloss black letters that are attached with a weatherproof and waterproof adhesive to the plate backing, giving a good solid strong feel
Upgrade your vehicle with our high-quality, fully legal number plates, manufactured to meet all UK road and DVLA standards. Whether you're replacing damaged plates or customising your vehicle with a clean, fresh look, our plates are the perfect choice.
Made with 3mm Acrylic All Black Letters, these are truly stunning!
✅ Fully Road Legal – Produced in strict accordance with the latest UK regulations, including spacing, font, and reflective materials. Suitable for MOT and road use.
✅ DVLA-Approved Materials – Made using industry-standard reflective acrylic and durable components, ensuring visibility, weather resistance, and long-lasting quality.
✅ BS AU 145e Compliant – Our plates are manufactured to comply with the current British Standard, including supplier details and BS number printed as required.
✅ Customisable – Choose from Full Size or 16 Inch Shortened (Please Note: Whilst the shortened is smaller, all spacing is correct and remains legal).
✅ Fast Turnaround – Quick production and dispatch with the aim to dispatch on the Next Working Day.
📌 Important Note: Proof of ownership and ID will be required before we can process and dispatch your plates. This is a legal requirement for all number plate suppliers.
All Number Plates come with "CEUK - HD8 9WL" in the center, as well as the BSAU code in the bottom right. These are Pre Printed onto the plates and can not be removed
Order with confidence – Whether it's for a car, van, motorbike, or trailer, our number plates combine style, legality, and reliability.
Please note: Shortened 16 inch plates can only fit a maximum of 6 digits, if your plate is 7 digits unfortunately this can not be supplied as shortened.
Questions or Special Requests? Our team is happy to help. Simply drop us an email or WhatsApp message!
All Number plates will be supplied with the Car Enhancements UK "CEUK" Logo text, Our Manufacture Post code and BSAU Number as per legal requirements.
Premium Road-Legal Number Plates – Fully Compliant & Professionally Made
Supplied as 1 White and 1 Yellow (Front & Rear) Plate
3D Gel Number Plate
A 3D number plate uses a Gel Coated black letter attached to a number plate using weatherproof and waterproof adhesive, extra strong and durable and look amazing once installed.
Upgrade your vehicle with our high-quality, fully legal number plates, manufactured to meet all UK road and DVLA standards. Whether you're replacing damaged plates or customising your vehicle with a clean, fresh look, our plates are the perfect choice.
Made with 3D Gel Coated All Black Letters, these are truly stunning!
✅ Fully Road Legal – Produced in strict accordance with the latest UK regulations, including spacing, font, and reflective materials. Suitable for MOT and road use.
✅ DVLA-Approved Materials – Made using industry-standard reflective acrylic and durable components, ensuring visibility, weather resistance, and long-lasting quality.
✅ BS AU 145e Compliant – Our plates are manufactured to comply with the current British Standard, including supplier details and BS number printed as required.
✅ Customisable – Choose from Full Size or 16 Inch Shortened (Please Note: Whilst the shortened is smaller, all spacing is correct and remains legal).
✅ Fast Turnaround – Quick production and dispatch with the aim to dispatch on the Next Working Day.
📌 Important Note: Proof of ownership and ID will be required before we can process and dispatch your plates. This is a legal requirement for all number plate suppliers.
All Number Plates come with "CEUK - HD8 9WL" in the center, as well as the BSAU code in the bottom right. These are Pre Printed onto the plates and can not be removed
Order with confidence – Whether it's for a car, van, motorbike, or trailer, our number plates combine style, legality, and reliability.
Please note: Shortened 16 inch plates can only fit a maximum of 6 digits, if your plate is 7 digits unfortunately this can not be supplied as shortened.
Questions or Special Requests? Our team is happy to help. Simply drop us an email or WhatsApp message!
All Number plates will be supplied with the Car Enhancements UK "CEUK" Logo text, Our Manufacture Post code and BSAU Number as per legal requirements.
Premium Road-Legal Number Plates – Fully Compliant & Professionally Made
Supplied as 1 White and 1 Yellow (Front & Rear) Plate
Printed Number Plate
A printed number plate uses a black toner to print the registration onto the reflective backing before being attached to the rear of a clear 3mm premium gloss acrylic. As the letters are printed behind the acrylic these can not be scratched or fade. They look just like factory originals!
Upgrade your vehicle with our high-quality, fully legal number plates, manufactured to meet all UK road and DVLA standards. Whether you're replacing damaged plates or customising your vehicle with a clean, fresh look, our plates are the perfect choice.
✅ Fully Road Legal – Produced in strict accordance with the latest UK regulations, including spacing, font, and reflective materials. Suitable for MOT and road use.
✅ DVLA-Approved Materials – Made using industry-standard reflective acrylic and durable components, ensuring visibility, weather resistance, and long-lasting quality.
✅ BS AU 145e Compliant – Our plates are manufactured to comply with the current British Standard, including supplier details and BS number printed as required.
✅ Customisable – Choose from Full Size or 16 Inch Shortened (Please Note: Whilst the shortened is smaller, all spacing is correct and remains legal).
✅ Fast Turnaround – Quick production and dispatch with the aim to dispatch on the Next Working Day.
📌 Important Note: Proof of ownership and ID will be required before we can process and dispatch your plates. This is a legal requirement for all number plate suppliers.
All Number Plates come with "CEUK - HD8 9WL" in the center, as well as the BSAU code in the bottom right. These are Pre Printed onto the plates and can not be removed
Order with confidence – Whether it's for a car, van, motorbike, or trailer, our number plates combine style, legality, and reliability.
Please note: Shortened 16 inch plates can only fit a maximum of 6 digits, if your plate is 7 digits unfortunately this can not be supplied as shortened.
Questions or Special Requests? Our team is happy to help. Simply drop us an email or WhatsApp message!
All Number plates will be supplied with the Car Enhancements UK "CEUK" Logo text, Our Manufacture Post code and BSAU Number as per legal requirements.
Enhanced Edition D3S LED Replacement Bulb Upgrade – 6000K Ice White
Upgrade your lighting with the Enhanced Edition D3S LED bulbs – a direct plug-and-play replacement offering up to 5x more brightness than standard OEM units. Designed to enhance night-time visibility while maintaining safe, non-glare output for oncoming traffic, these bulbs are the perfect upgrade for any vehicle using D3S fitment.
Engineered to work seamlessly with self-levelling projector headlights, these high-performance bulbs deliver a crisp 6000K white light and improved road coverage without compromising your factory housing or lens.
Whether you're upgrading for safety, performance, or aesthetics, IllumiNite delivers consistent, high-quality light output — every time.
High Brightness Guaranteed
Instant Start / Warm Up
Stable Current Decoding & Error Free
Thicker copper materials for excellent thermal conductivity
Plug & Play using original plug
Lower temperature for longer reflector lifespan!
🔧 Technical Specifications:
Fitment: D3S
Voltage: 12V
Power: 45W / 4500lm
Colour Temperature: 6000K Ice White
Technology: LED (7545 CHIP)
Compatibility: Suitable for Projector Headlights (won’t damage lenses)
📦 What’s in the Box?
2x IllumiNite D3S LED Bulbs
🛡️ Warranty & Returns
12-Month Warranty as standard
🚗 Vehicle Fitment Notice:
Some vehicle trims or special editions (e.g., Ford ST, VW GTI) may use different light units than the standard model. Please check your existing bulb type before ordering to ensure correct fitment.
This item is also known as:
Standard
Trade Ref
Base Type
Watt
D3S
66340 / 42403
PK32d-5
35w
Enhanced Edition D1S LED Replacement Bulb Upgrade – 6000K Ice White
Upgrade your lighting with the Enhanced Edition D1S LED bulbs – a direct plug-and-play replacement offering up to 5x more brightness than standard OEM units. Designed to enhance night-time visibility while maintaining safe, non-glare output for oncoming traffic, these bulbs are the perfect upgrade for any vehicle using D1S fitment.
Engineered to work seamlessly with self-levelling projector headlights, these high-performance bulbs deliver a crisp 6000K white light and improved road coverage without compromising your factory housing or lens.
Whether you're upgrading for safety, performance, or aesthetics, IllumiNite delivers consistent, high-quality light output — every time.
High Brightness Guaranteed
Instant Start / Warm Up
Stable Current Decoding & Error Free
Thicker copper materials for excellent thermal conductivity
Plug & Play using original plug
Lower temperature for longer reflector lifespan!
🔧 Technical Specifications:
Fitment: D1S
Voltage: 12V
Power: 45W / 4500lm
Colour Temperature: 6000K Ice White
Technology: LED (7545 CHIP)
Compatibility: Suitable for Projector Headlights (won’t damage lenses)
📦 What’s in the Box?
2x IllumiNite D1S LED Bulbs
🛡️ Warranty & Returns
12-Month Warranty as standard
🚗 Vehicle Fitment Notice:
Some vehicle trims or special editions (e.g., Ford ST, VW GTI) may use different light units than the standard model. Please check your existing bulb type before ordering to ensure correct fitment.
This item is also known as:
Standard
Trade Ref
Base Type
Watt
D1S
66144 / 85415
PK32s-2
35w
Custom Car Number Plate Keyring – Personalised Reg Plate Keyring for Car Enthusiasts
Add a personal touch to your keys with our Custom Number Plate Keyring, designed to replicate your actual car registration plate. Whether you're a proud car owner, collector, or just love a bit of custom flair, this keyring is the perfect accessory to show off your pride and joy.
✅ Customisable with your exact number plate✅ Durable Dual Layer 6mm acrylic construction✅ Colour Customisable for maximum visibility✅ Ideal gift for car lovers, new drivers or clubs✅ Lightweight yet strong – built to last
Why choose our number plate keyring?
Each keyring is made to order using high-quality materials that ensure long-lasting colour and detail. It’s lightweight enough for everyday use, yet tough enough to handle daily wear and tear. The miniature plate design mirrors UK registration plates, giving it a premium and authentic look.
Choose whatever colour Face plate and back plate you want to give you a truly customised look.
Perfect for:
Personal use
Gifts for new car owners
Car club merchandise
Show & shine accessories
Lifetime warranty*
The filter is manufactured to Forge’s specifications by Pipercross
Washable and reusable design.
Layered multi-density foam technology.
Designed and manufactured in Great Britain.
Improvement in engine power and torque.
Designed to flow stronger for longer.
Fitting is straightforward and can be completed in 20-30 minutes.
This kit requires no cutting or modification to the vehicle, allowing it to be reversed back to stock.
FMINDK39 is the long-awaited Forge induction kit for the VAG 1.0 TSI, including the Seat Ibiza Mk5. Our induction kit is an evolution of the FMINDK30 used for the VW UP! GTI. There are two key changes from that kit; the main and most important change is the incorporation of the OEM air duct which allows the kit to fit up to the original cold air ducting. The second alteration is the inclusion of a lid to the heat shield which has been selected to retain as much of the cold air flowing into the airbox as possible.
After time spent on the dyno, we achieved gains of 5 bhp and 6lbft torque throughout the rev range which is extremely pleasing results not to mention the improved sound track our intake gives this punchy little 1.0 litre engine - higher gains can be expected from mapped cars.
The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of three colours: black, red, or grey. The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any car engine bay both technically and aesthetically.
Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge intake.
Please note, if your engine looks like the picture below FMINDK39 and FMDV18 is not compatible.
If your engine looks like the picture below, FMINDK39 and FMDV18 is compatible.
CONFIRMED FITMENT
AudiA1A1 (8X) 2010-20181.0 TSI 2015-2021 A1 (GB) 2018-1.0 TSISeatArona1.0 TSIAteca1.0 TSIIbizaMk5 (KJ) 2017 - late 20211.0 TSISkodaKodiaq1.0 TSIOctavia1.0 TSI (2018-2021)Scala1.0 TSIVolkswagenGolfMK71.0 TSIMK7.51.0 TSIPolo1.0 TSI T-Cross1.0 TSIT-Roc1.0 116PS
034Motorsport’s RS+ Adjustable MQB Solid Rear Sway Bar for Audi 8V A3/S3, F3 Q3, 8S TT/TTS Quattro, and Volkswagen MK7/7.5 Golf R, Sportwagen, and Alltrack is now available! The 034Motorsport Adjustable Solid Rear Sway Bar is made from a single piece of high-quality, solid 0.938” thick spring steel for maximum rigidity, and is designed to combat understeer while reducing body roll under hard cornering without negatively impacting comfort.
Vehicle Fitment:
-Volkswagen Arteon Golf Mk7
-Audi S3 (8V) S3 (8Y) A3 (8Y 2020-) A3 (8V 12-20) TT Mk3 (8S) Q3 (Mk2 18-)
-SEAT CUPRA -Ateca -Tarraco -Leon Mk3 (5F) -Formentor
-Skoda Kodiaq Octavia Mk3 (5E) Superb (3V 2015-)
NOTE: this sway bar will not fit these vehicles:
8S TTRS
8V.5 RS3
8Y RS3
Mk8 Golf R
2025+ 8Y.5 Audi S3
Why choose the RS+ Rear Sway Bar over our Standard MQB AWD Rear Sway Bar?Our Standard MQB AWD Rear Sway Bar was designed to provide a neutral handling experience. It reduces understeer while allowing drivers to coax their car into oversteer as desired.The RS+ Rear Sway Bar ticks things up a notch, providing over 171% stiffer than the factory rear sway bar and an additional 70% stiffness over our Standard MQB AWD Rear Sway Bar. This additional stiffness is great for owners looking to maximize rear end rigidity, turn-in response, and better rotation—further reducing understeer and maximizing handling performance!
Rate Increase Data:
034Motorsport RS+ vs. Factory Sway Bar
034Motorsport RS+ (Soft) - 144% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar
034Motorsport RS+ (Stiff) - 171% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar
034Motorsport Standard MQB AWD Sway Bar vs Factory Sway Bar
034Motorsport Standard MQB AWD Sway Bar (Soft) - 42% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar
034Motorsport Standard MQB AWD Sway Bar (Stiff) - 70% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar
The 034Motorsport RS+ Adjustable MQB Rear Sway Bar can be used with or without an upgraded Front Sway Bar. For avid track enthusiasts or those looking for the sharpest cornering, our Front Sway Bar is recommended to be paired with our RS+ Rear Sway Bar upgrade. For those looking for the absolute most rear end rotation, the factory front sway bar should be retained.034Motorsport Sway Bar Kits feature maintenance-free polyurethane bushings with a Teflon and polyester liner designed to enhance sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also results in an extended service life that allows these bushings to even outlast your vehicle. With no need for additional lubrication, these bushings offer reliable, long-lasting performance without the hassle of regular maintenance and greasing. Built to withstand extreme conditions, the bushings are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are covered by a limited lifetime warranty which covers material cracking, separation of the Teflon liner and polyurethane bushing, or squeaking under normal street or track conditions.
Features:
Manufactured From High-Quality, Solid, 0.938” Spring Steel
Two Positions for Adjustability Based on Driver Preference
Sway Bar Rate Data:
034Motorsport (Soft) - 144% Rate Increase vs. vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) Hollow Rear Sway Bar
034Motorsport (Stiff) - 171% Rate Increase vs. Factory Audi 8V S3/Mk7 Golf R (22.0mm x 3.0mm) hollow rear sway bar
Attractive Black Powdercoat for Protection From the Elements
Beautiful Billet CNC Brackets With Clear Anodizing for Protection From The Elements
Locating Collars To Prevent the Sway Bar From Walking Side to Side
Greaseless, Maintenance Free, Teflon Lined Polyurethane Bushings
Teflon and Polyester Composition Liner That Virtually Eliminates Noise, Vibration and Harshness (NVH).
Improves Sway Bar Response Speed
Extended Service Life
No Additional Lubricant Needed, and Should Not Be Added
Hydrophobic and Waterproof, Will Not Absorb Water or Be Affected In Even The Wettest Environments
Is Not Chemically Reactive and Will Not Be Affected By Common Chemicals Present In The Automotive Environment
Heat Resistant, Can Operate Continuously At Temperature Up to 500°F, Much Higher Than What Any Bushing Would See
Limited Lifetime Warranty, Covering Manufacture Defects:
Material Cracking
Separation Of Teflon Liner and Polyurethane Bushing
Squeaking Under Normal (Street/Track) Conditions.
What's Included:
034Motorsport MQB AWD RS+ Adjustable Solid Rear Sway Bar
Teflon Lined Polyurethane Sway Bar Bushings
Billet Aluminum Sway Bar Brackets
Sway Bar Bracket Installation Hardware Kit
Spoiler Volkswagen Golf R / GTI / R-Line Hatchback Mk7 / Mk7 Facelift
FITS:Volkswagen Golf R Hatchback Mk7 2013 - 2016Volkswagen Golf GTI Hatchback Mk7 2013 - 2016Volkswagen Golf R-Line Hatchback Mk7 2013 - 2016Volkswagen Golf R Hatchback Mk7 Facelift 2016 - 2020Volkswagen Golf GTI Hatchback Mk7 Facelift 2016 - 2020Volkswagen Golf R-Line Hatchback Mk7 Facelift 2016 - 2020
Item is supplied UNPAINTED and will require Test fit, prep and paint prior to install!COMPLETE SET CONTAINS:-> Spoiler
Our fiberglass products are handmade. Please understand that this could mean the product requires adjustments before beginning the installation / painting process.
If the product arrives with any scuff marks it will not affect the finish, as it is unpainted, and preparation needs to be completed first.
Adjustments include:
- Sanding – Essential
- Priming – Essential
- Shaping - Possible
We always recommend taking such products to a professional body shop that specialises in or is familiar with fiberglass
This filter is Universal, Please ensure you check the size is appropriate to yourself Prior to ordering, Just because this is in your vehicle category does not mean it will definitely fit
This filter is designed to be inserted into a flexible hose such as a rubber or silicone intake pipe.
These filters have an aluminium ram-pipe neck and a cone shaped filter element. This integral cone channels all the incoming air, towards the inlet manifold, and in doing so, reduces unnecessary turbulence. These filters are also cone shaped because it enables easy fitting to space restricted engine compartments and with the extremely large amount of pleated surface area an added boost of power to your engine too!
These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the pleated range by Ramair is the premium choice on the market today for your fast road or track car.
With its large size, technologically advanced filter and bell mouth alloy spun base this filter kit is capable of handling extremely large power & flow rates.
Filter Outer Neck Diameter: Select Your Option
Filter Neck Length: 45mm (1.8inch)
Filter Overall Length: 185mm (7.3inch)
Filter Base Width: 150mm (5.9inch)
Filter Top Width: 120mm (4.7inch)
Filter Material: Pleated Nanofibre
Filter Base Material: Aluminium
Filter Base Finish: Black Powder Coat
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit)
Brand new to CEUK - the PlexiClick® Invisible Number plate holder system!
Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders!
Also perfect for those who swap their number plate for a show plate at events!
Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance.
Whats in the kit?
4x Plexiclick® V3 for mounting two UK license plates
8x screws for fixing the clips to your vehicle
4x Anti Vibration Rubber Bungs
1x Instruction Manual
Key Specifications:
Material: Premium quality, weather-resistant plastic
Fitment: Universal for UK standard license plates (front & rear)
Color: Clear, frameless design
Installation: Number plate just clicks into place and can be removed easily
compatible for:
Audi
A3
1.8/2.0 TSI 2015 Onwards
Q3
2.0 TSI (2015-2018)
S3
2.0 TSI (8V Chassis)
2.0TSI (8Y Chassis)
Sportback 2.0TSI (8Y Chassis)
SQ2
2.0TSI (2018-2021)
TT
Mk2
2.0
A31.8/2.0 TSI 2015 Onwards
Q32.0 TSI (2015-2018)
S3
2.0 TSI (8V Chassis)
2.0TSI (8Y Chassis)
Sportback 2.0TSI (8Y Chassis)
SQ22.0TSI (2018-2021)
TTMk2
Cupra
Ateca
VZ1, VZ2, VZ3, VZN 2021-
Formentor
2.0 TSI (245 BHP)
2.0 TSI (310 BHP)
Leon
VZ1, VZ2, VZ3
Seat
Leon
Mk3 2012-2020
Skoda
Kodiaq
2.0TSI (EA888 Gen 3)
RS 2021-
Octavia
VRS 2.0 TSI 2013 Onwards
Octavia 4 RS
Superb
280 4x4 DSG
Volkswagen
Arteon
2.0 TSI
Golf
MK7
1.8 TFSI
GTI
GTI Clubsport ED40
R
MK7.5
GTI
R
MK8
Clubsport 45
GTI
GTI S
R
Jetta
MK7 (2018-2021)
2.0 GLI
MK7.5 (2021-)
2.0 GLI
Passat
2.0 TSI (2015-2021)
T-Roc
2.0 2018-2021
Tiguan
2.0 TSI 2017 Onwards
R 2022 Onwards (Gen 4)
Touareg
2.0 TSI (2018-2021)
Product Description
Highlights:
Power gains of up to 13BHP (when paired with the appropriate turbo inlet adaptor)
Torque gains of up to 17NM (when paired with the appropriate turbo inlet adaptor)
Pleated or foam filter available
Greater engine sound
Made in the UK
Lifetime guarantee
With our in-house VW Golf MK8R development vehicle we have been able to complete thorough testing on the EA888 gen4 platform, from rolling roads to track time. This has allowed us to create FMINDK44, the second induction kit we have available for the EA888 gen 3 and gen 4 platform (alongside our carbon fibre variant, FMINDK40). This kit features either a Forge Motorsport Ram Air high flow, pleated, synthetic nanofiber filtration filter or a Pipercross foam filter. Both are manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 2.0 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives.
The intake diameter has been carefully tuned to provide exactly the correct quantity of air for consistent power gains throughout the rev range and minimising the chance of low-end torque loss; the pipework is specifically designed to feed the turbo without interruption. The result of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the EA888 engine. With the use of SolidWorks, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing.
The majority of our dyno testing was done on our VW Golf R MK8 EA888 Gen 4, as such you may find slight variations in gains when fitted to other vehicles sharing this engine. During the final prototypes testing we found that the induction kit with stock turbo inlet produced gains on average of 3.5BHP. However, when paired with our turbo inlet adaptor FMTIA5 (RHD), FMTIA6, or FMTIA9 (LHD), or FMINLMK7, this is where the stock EA888 gen4 engine saw impressive gains, increasing power up to 13BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 8BHP; while the drivability and the punch from extra torque increases can be felt on the road at between 4000RPM to the rev limit an average gain of 17NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power.
Why Do We Try To Decrease Inlet Air Temperatures (IAT’S)?
By utilising the OEM cold air feed, and keeping the heat shield open on the headlight corner side we were able to see a decrease in IAT’s compared to the OEM during testing. By ensuring that the intake heat shield is open on this side it also means that vehicles being tuned to stage 2/3+ have a reduced risk of being restricted with them pulling in a greater quantity of air.
Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque.
It’s worth noting that this induction kit offers a massive amount of air to the EA888 engine, which is a must for anyone looking to push the performance when tuning to stage1, stage 2 and beyond. Not only do you get the bhp performance benefits, but FMINDK44 also offers a greater sound from the engine; particularly when on boost, and our product testers have reported a more responsive throttle too.
Careful consideration into the other platforms that share the same engine configurations had also been at the forefront of our development engineers’ minds. This needed various vehicles to be sourced to ensure a perfect fit for many of the VAG groups performance vehicles. You have only got to look at our compatibility list to realise how much research and development has gone into this extraordinary performance induction kit.
The kit comes complete with everything you need for installation, which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. The kit has been designed not just to increase power but to fit a whole range of vehicles on the MQB platform. This goes as far as to include cars using the OEM turbo elbow and the Forge Motorsport FMTIA5/FMTIA6/FMTIA9 high flow elbows. With FMTIA5/FMTIA6/FMTIA9 using multi ply silicone, it has minimal flex; however the OEM inlet hose uses an accordion rib design which could cause the filter to damage itself or the heat shield. Unlike our competitors, we have included a P-clip and tab on the back of the heat shield, allowing the OEM inlet hose to be secured to the heat shield, meaning no damage and no annoying rattles!
Time taken to install - around 1 hour
Price is for one strut / prop
Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors
Pro Props Carbon Fibre Bonnet Prop
Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance.
Shaft
Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal.
Upper Fixing
Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook.
Lower Fixing
Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit.
Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet.
Sizing
Length of Carbon Section only: 550mm / 55cm
Total length of all parts: 670mm / 67cm
Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
Custom 4D Number Plate Tags – Pair | Fully Legal | Any Colour & Logo
Add a bold, custom touch to your UK number plates with our CEUK 4D Number Plate Tags – fully road legal and made to match or enhance your 4D plates. These are not just stickers – they’re premium, 3mm acrylic tags with a raised 4D effect, available in any colour and logo combination you choose.
Designed to stick to the left side of your number plate using weatherproof backing tape, these tags offer a fully customisable and stylish upgrade that complies with UK number plate regulations.
✅ Key Features:
Sold as a Pair – includes 2x matching tags
100% Road Legal – 50mm wide to comply with DVLA size regulations
Fully Customisable:• Choose tag colour• Choose logo/emblem• Choose logo orientation• Choose logo colour
Weatherproof & Durable – designed to last in UK conditions
Easy Fit – pre-applied adhesive for quick install
🛠️ Size Options:
Option 1 – Standard Plates (No Frame):
• H 110mm x W 50mm x T 3mm• Designed to fully cover the corner of any number plate without a frame
Option 2 – Plates with Surround Frame:
• H 100mm x W 47mm x T 3mm• Slightly smaller to fit inside plate frames (may leave a small border)
💡 Note: Fit may vary slightly due to universal design. See product images for visual examples.
Looking for something completely custom? Contact us at support@ceuk.org and our in-house design team will be happy to help you create a truly unique tag!
Custom 4D Number Plate Tags – Fully Legal Acrylic Pair | Multiple Colours & Logos
Take your number plate styling to the next level with CEUK’s Custom 4D Number Plate Tags – designed to perfectly complement 4D number plates, but also compatible with any standard UK number plate.
Crafted from 3mm premium acrylic, these tags are 100% road legal at just 50mm wide, and adhere easily to the left-hand side of your plate using pre-applied, weatherproof adhesive backing.
Sold as a pair (2 tags), each set is fully customisable to match your build’s style.
🎨 Customisation Options:
Choose your tag colour
Choose your logo or emblem
Choose the logo orientation
Choose the logo colour
📏 Size Options:
Option 1 – For Plates Without Frames:
• H 110mm x W 50mm x T 3mm• Designed to fully cover the plate’s left edge — ideal for plates fitted directly to the car.
Option 2 – For Plates With Surround/Holder:
• H 100mm x W 47mm x T 3mm• Slightly smaller to fit cleanly within most number plate holders (see sizing disclaimer below).
✅ Key Features:
Sold as a pair (2 tags included)
Legal under UK number plate regulations
Premium laser-cut acrylic (3mm thick)
Weatherproof adhesive – pre-applied for easy install
Designed and made in the UK by CEUK
Perfect for adding personal or branded touches to your plate setup
⚠️ Disclaimer:
Full-size tag (Option 1) is universal and may slightly overlap corners depending on plate shape — designed to fully cover edge areas.
Smaller tag (Option 2) may leave a 1–2mm border between the tag and frame depending on your holder’s dimensions.
📩 Want Something Completely Custom?
No problem — just email support@ceuk.org, and our design team will help bring your idea to life.
Enhanced Edition H7 Mini LED Bulbs – Ultra Compact, 6000Lm Output (6000K Ice White)
All the power of our popular V3 LED Bulb – in a compact, low-profile design.Introducing the Enhanced Edition H7 Mini, designed to deliver exceptional brightness and clarity while eliminating the bulk of traditional LED upgrades. This is the perfect solution for tight-fit housings or vehicles with limited rear clearance.
Ideal for dipped beam, high beam, or fog light applications, the H7 Mini fits any vehicle using a standard H7 fitting – no adapters, clips, or caps required.
💡 Why Choose the H7 Mini?
Massive 6000Lm per bulb output – crisp 6000K Ice White
Micro-sized cooling fan built into the shaft – no bulky heat sink
Zero polarity issues – 4-point design works in multiple orientations
Plug & Play Installation – fits directly into H7 sockets with no mods
Compatible with projector and reflector housings
⚙️ Technical Specs:
Voltage: 12V
Wattage: 28W
LED Chip: 3570
Colour Temperature: 6000K (Ice White)
Lumen Output: 6000Lm per bulb
Fitment: H7 (replaces OEM halogen)
📦 What's in the Box:
2x H7 Mini Enhanced Edition LED Bulbs
Default colour: 6000K Ice White
Supplied with 12-month CEUK warranty (keep packaging if longer warranty is stated)
⚠️ Vehicle Fitment Note:
While this bulb fits all standard H7 sockets, spec-level variants (e.g. Ford ST, VW GTI) may use different housings. Please confirm bulb type before ordering by checking your existing unit.
Installing LEDs may trigger a dashboard bulb error on some vehicles. This is harmless and explained in our FAQs.
This item is also known as:
Standard
Trade Ref
Base Type
Watt
H7
477
PX26d
55w
Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.)
FITS:
AUDI
RS3 8V Saloon/Sedan 17-18 Non-GPF Model
RS3 8V Saloon/Sedan 19-20 GPF Model
RS3 8V Sportback 15-17 PFL
RS3 8V Sportback 17-18 Facelift Non-GPF Model
RS3 8V Sportback 19-20 Facelift GPF Model
S3 2.0T 8V (3 Door & Sportback) Facelift GPF Model
S3 2.0T 8V (3 Door & Sportback) Facelift Non-GPF Model
S3 2.0T 8V (3 Door & Sportback) PFL
S3 2.0T 8V (Saloon) Facelift GPF Model
S3 2.0T 8V (Saloon) Facelift Non-GPF Model
S3 2.0T 8V (Saloon) PFL
S3 2.0T 8Y Quattro (Saloon) GPF Model
S3 2.0T 8Y Quattro (Saloon) ROW
S3 2.0TFSi 8Y Quattro (Sportback) GPF Model
S3 2.0TFSI 8Y Quattro (Sportback) ROW
SQ2 19-24
TT MK3 2.0TFSi Quattro Non GPF Model
TT RS MK3 GPF Model
TT RS MK3 Non GPF Model
TT S MK3 Coupe Non-GPF Model
CUPRA
Formentor 2.0 TSI 4Drive
Leon 245 GPF Model
Leon 245 ROW
Ateca
Leon ST VZ 4Drive
SEAT
Leon Cupra 2.0 TSI 280, 290 & 300 Non GPF Model
Leon Cupra 2.0 TSI 280/290 ST
Leon Cupra 2.0 TSI 290 GPF Model
Leon Cupra ST 300 4Drive (GPF Model)
Leon Cupra ST 4Drive Carbon Edition
SKODA
Octavia vRS 2.0 Tsi
VW
MK7 Golf Estate R (pre facelift)
MK7 Golf GTi (including Clubsport & Clubsport S)
MK7 Golf R (pre facelift)
MK7 GTD
MK7.5 Golf Estate R (facelift) GPF Model
MK7.5 Golf Estate R (facelift) Non GPF Model
MK7.5 Golf GTi (Non-GPF Model)
MK7.5 Golf GTi (TCR & GPF Models)
MK7.5 Golf R (facelift) GPF Model
MK7.5 Golf R (facelift) Non GPF Model
MK8 Golf GTI Clubsport GPF Model
MK8 Golf GTI Clubsport ROW
MK8 Golf GTI GPF Model
MK8 Golf GTI ROW
MK8 Golf R GPF Model
MK8 Golf R ROW
Polo MK6 (AW) GTi
