All

VERY FAINT MARK ON CAGE - WONT BE SEEN ONCE FITTED - NONE RETURNABLE CLEARANCE ITEM FITS FACELIFT MK3 ST250  All Direnza Cold Air Induction Systems are supplied with a high quality, cone style air filter; designed to replace the OEM airbox, offering more surface area compared to the standard filter. Direnza air filters are manufactured from premium grade, washable cotton, ensuring long-lasting performance enhancements. Direnza Cold Air Induction Kits include lightweight alloy pipework mandrel-bent for accurate placement on your vehicle, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment. Designed to replace the OE setup, providing up to 50% more filter surface area to help maximise capacity Engineered to help the 2.3L turbo engine breathe easier and improve throttle response from your Focus RS. Gains in power and torque are noticeable over a larger RPM range A straightforward way to give your MK3 RS a sporty, performance soundtrack Complete kit includes mandrel-bent alloy pipework, high quality cotton filter and high performance silicone hoses Fitment Ford Focus Mk3 ST250 2.0 2012-2018 Please note: Please ensure your MAF sensor is the the bolt in style before purchase OEM Part Number 1937555

Read more less

Product Description A replacement high flow performance air filter for our popular FMINDK14 and FMINDK14-GTE induction kits. The filter will also replace the paper element for those wishing to remove the restrictions of the OEM unit. Please watch our video on how to fit an air filter without damaging it.

Read more less

Product Description *Please be aware that if your vehicle has the below MAF sensor on the inlet then this intake will not fit your vehicle, we currently do not offer an alternative for MAF vehicles* Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine. Left hand drive intake Right hand drive intake As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system. The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response. With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come. This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport. Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering. During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.     The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*  

Read more less

Product Description 70mm I/D Rubber Neck Open Cone Air Filter - High flow construction and increased surface area Replaces the filter in the following kits - FMINDK5- Ford Fiesta 1.0 Ecoboost induction kit FMINDST180- Ford Fiesta ST180 induction kit FMINDASTG - Astra G induction kit *Please note - this filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.

Read more less

Product Description 76mm I/D Rubber Neck Open Cone Air Filter Cotton mesh construction Replacement for the following kits: FMIND01 - Kona 1.8T induction kit FMIND207 - 207 GTi induction kit FMIND011 - Fiat Grande Punto and Alfa Romeo Mito 1.4 Tjet intake FMINDFPA - Induction Kit for Fiat Punto EVO Multiair Please watch our video on how to fit an air filter without damaging it.

Read more less

Gain power and loud waste gate chatter noise. Large cotton designed filter with specifically machined alloy trumpets for GT Turbos with 102mm , No restrictions from cheap trumpet down graders here! Please choose from options of either Silveror Satin Black Alloy Trumpet. AIRTEC part no: ATIKFO3

Read more less

TECHNICAL DATA AIRTEC Motorsport replacement foam air filter for Ford Focus ST & RS (EcoBoost and Duratec engines) and the Volvo C30. This air filter is a direct replacement part for a wide range of vehicles. This part is an equivalent replacement for the following manufacturers part numbers… OEM Part Numbers: Ford 1296204 Ford 1477153 Ford 1496204 Ford 1511213 Ford 1708877 Ford 7M519601 Ford 7M519601AC Ford CV6Z9601A Ford ED819601AA Mazda Y64213Z40B Mazda Y64213Z40B Volvo 16899132 Volvo 30792881 Volvo 31338216 Volvo 76899132 Volvo 7699132 The AIRTEC Filter range is made from twin core Aeriform foam and our stainless steel cage which is used in many of our tier 1 Motorsport applications for maximum strength. A rubber polymer surround gives a fantastic clean and smooth finish with longevity in mind. These filters are direct replacements for the OEM air filter in your car, making this filter easy to fit and maintain. The AIRTEC twin core foam is unique and like no other in the market. Our foam is designed to give maximum dust filtration along with optimum performance. Features High Performance, MAF Safe, twin layer, fully reticulated foam Fits in the OEM Airbox and replaces inefficient paper filter Easy to clean using hot soapy water Stainless steel cage support structure Guaranteed surface area using high quality custom blended polymer Fits the following vehicles: Ford Focus MK2 2006-2011Ford Focus MK2 2004-2015Ford Focus C-Max 2005-2007Ford C-Max 2011-2013Ford C-Max 2010-2015Ford Kuga 2014-2015Ford Focus 2014-2015Ford Transit connect 2013-2015Volvo V50 2005-2010Volvo S40 2004-2008 Please note: Does not fit ST250 standard airbox. DIMENSIONS Filter Type: Cylinder Filter Quantity: 1 Filter Shape: Circle Filter Length: 205mm Filter Width: 156mm Filter Depth: 156mm Filter Internal Neck Diameter: 70mm AIRTEC part no: ATMSFO37

Read more less

AIRTEC Motorsport Focus Mk2 Two-Piece ECU Holder With the cost of a genuine Ford ECU cover regularly increasing, AIRTEC Motorsport are proud to launch its own direct replacement design. Made from high-quality, injection-moulded plastic and finished in smooth satin black, our two-piece holder looks and feels very similar to the genuine Ford item, but at far less cost. The intricate design means a perfect fit and features an AIRTEC cooling cut-out and embossed logo for a real OEM+ look that will compliment any Mk2 Focus ST/RS engine bay. It can be fitted with our hugely popular Focus ST Group ‘A’ filter kit, as well as other custom induction kits, and is secured in place using the original OEM fittings. AIRTEC part no: ASCOV1

Read more less

Focus RS MK2 Group A Cold Air Feed which is designed to work with all Group A Open filters. Supplies a cold air feed directly into the Group A Filter Improving and maximising the airflow and performance. The cold air feed comes with Cold feed guide which sits just below the filter securing the trunking as well as a front grill-mounted plate which replaces the original plastic piece. Each kit comes with a 780mm piece of ducting, required plates and all required bolts and fixings. Please select options below of the kit you require. Option 1: Engine Bay Base Plate with Air Duct Option 2: Engine Bay Base Plate, Front Grill Plate & Air Duct   PLEASE NOTE: Silver finish is for illustrative purposes only.

Read more less

As part of our expanding BMW B58 engine platform product range, AIRTEC Motorsport is proud to launch our enclosed intake kit for the M140i and M240i models, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow whilst maintaining low intake temperatures, improving response, as well as sound and aesthetics within the engine bay. Having previously designed a number of shielded induction kits for other performance models, we were keen to develop an extensive intake package for the BMW M140i/M240i models to offer significant improvements. Featuring a free-flowing cotton air filter, accompanying aluminium intake pipe with billet MAF housing and Pro Hoses silicone connector, our kit is a direct replacement for the restrictive OEM air box set up. By opting for the largest filter that could be fitted, we’ve utilised the space and incorporated a profiled shield that seals against the bonnet and inner wing to create an enclosure and ensure the new air filter does not suffer with heat soak issues from the confines of the engine bay. The laser cut shield also ensures the filter only receives fresh air from the original OEM air feed fitted underneath. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Features: Comprehensive induction kit designed specially for the M140i and M240i platform Large cotton air filter for improved flow and increased performance Laser cut shield helps to ensure lower intake temperatures Front intake directs constant feed of cold air to the filter Improved soundtrack and under bonnet aesthetics Long-lasting, high-quality black powder coat finish Includes all fixtures and fittings AIRTEC Part No: ATIKBMW4

Read more less

Large Group A style cotton air filter, to fit multiple different applications. Fits the following models: Focus Mk2 RS Group A induction kit Focus Mk3 RS Stage 2 induction kit Focus Mk3 ST250 Stage 2 induction kit Toyota Yaris GR TRUMPET NOT INCLUDED Part no: ATIKFIL1

Read more less

The all new C:Performance 70mm branded foam filter is here! Made for CEUK by one of the largest filter manufacturers in the UK these are made of the finest components Stainless Steel mesh reinforced with a twin foam layer makes these perfect for performance and filtration. Featuring the C:Performance logo sweeping around the filter and our iconic "C" on the head Will fit all Fiesta MK7 and MK8 models.

Read more less