All

IWG75 Ford Focus ST / XR5 2.5L Turbo 7psi Ford Focus ST Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the IWG is easy to install and requires no special tools or fabrication. We’ve taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator. Features:– Silicone diaphragm with Nomex reinforcement to withstand high temperatures.– High grade, billet aluminium construction.– Stainless steel rods and connecting clevis for corrosion resistance.– Locking Collar design cap allows for quick spring changes (Options from 3psi to 26psi available).– AIRTEC Branded product Ideal for use with any Turbosmart boost controller. Please note: Pictures are library pictures and may not relate to actual product. AIRTEC part no: TS-0941-1010

Read more less

A fixed 50/50 vented valve, the Turbosmart Shortie Kompact Dual Port valves have been specifically designed to suit BorgWarner EFR and KKK turbos. They also fit the popular Ford Ecoboost engines. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new BW/KKK/Ecoboost Kompact valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 30PSI boost handling capability. Designed as a bolt-on replacement of the factory valve on all BorgWarner EFR, KKK and most Ecoboost turbos, the Kompact Shortie Dual Port provides better boost response and greater boost handling capability. Included with each Kompact Shortie kit is:Model specific valve, Straight and Banjo Nipples, and Mounting screws. Please note: Pictures are library pictures and may not relate to actual product.

Read more less

TECHNICAL DATA AIRTEC Turbosmart Shortie Kompact Series valves have been specifically designed to suit BorgWarner EFR and KKK turbos. They also fit the popular Ford Ecoboost engines. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost,  the new BW/KKK/Ecoboost Kompact valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 30PSI boost handling capability. Designed as a bolt-on replacement of the factory valve on all BorgWarner EFR, KKK and Ecoboost turbos, the Kompact Shortie Plumb Back provides better boost response and greater boost handling capability. Included with each  Kompact Shortie kit is:Model specific valve, Straight and Banjo Nipples, Mounting screws and Spring clamps. APPLICATION: Buick Regal 2.0 Turbo Chevrolet Cobalt SS (2008-2010)Chevrolet HHR SS (2008-2011) Ford F150 3.5 EcoBoost  (2011-2012) – Requires two valvesFord Focus MK3 ST 2.0 EcoBoostFord Fusion 2.0 EcoBoostFord XR5/RS 2.5 5-cylinder (2004-2010) Holden HSV Astra VXR Opel Astra G TypeOpel Astra H TypeOpel Astra VXR J type Pontiac Solstice GXP Porsche 911 Turbo (997) – Requires two valvesPorsche 911 GT2 (997) – Requires two valves Saturn Sky Redline Vauxhall Astra 1.6 GTCVauxhall Astra G TypeVauxhall Astra H TypeVauxhall Astra VXR J typeVauxhall Corsa VXR 1.6Vauxhall Zafira A or B Volvo C30 T5Volvo C70 T5Volvo S40 T5Volvo S60 T5Volvo V50 T5 (FWD/AWD)Volvo V70 T5 AIRTEC part number: TS-0941-1004

Read more less

TECHNICAL DATA AIRTEC Turbosmart Shortie Kompact Series valves have been specifically designed to suit BorgWarner EFR and KKK turbos. They also fit the popular Ford Ecoboost engines. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost,  the new BW/KKK/Ecoboost Kompact valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 30PSI boost handling capability. Designed as a bolt-on replacement of the factory valve on all BorgWarner EFR, KKK and Ecoboost turbos, the Kompact Shortie Plumb Back provides better boost response and greater boost handling capability. Included with each  Kompact Shortie kit is:Model specific valve, Straight and Banjo Nipples, Mounting screws and Spring clamps. APPLICATION: Buick Regal 2.0 Turbo Chevrolet Cobalt SS (2008-2010)Chevrolet HHR SS (2008-2011) Ford F150 3.5 EcoBoost  (2011-2012) – Requires two valvesFord Focus MK3 ST 2.0 EcoBoostFord Fusion 2.0 EcoBoostFord XR5/RS 2.5 5-cylinder (2004-2010) Holden HSV Astra VXR Opel Astra G TypeOpel Astra H TypeOpel Astra VXR J type Pontiac Solstice GXP Porsche 911 Turbo (997) – Requires two valvesPorsche 911 GT2 (997) – Requires two valves Saturn Sky Redline Vauxhall Astra 1.6 GTCVauxhall Astra G TypeVauxhall Astra H TypeVauxhall Astra VXR J typeVauxhall Corsa VXR 1.6Vauxhall Zafira A or B Volvo C30 T5Volvo C70 T5Volvo S40 T5Volvo S60 T5Volvo V50 T5 (FWD/AWD)Volvo V70 T5 AIRTEC part number: TS-0941-1004

Read more less

AutoSpecialists Focus ST Carbon Fibre look Gen2 CAIS 'Cold Air Induction System' Gain 10 - 18 bhp depending on spec of your ST. 12 Month's of Proto types & testing has produced a Real Quality and Unbeatable value for money product. Our Gen1 CAIS worked great and feel it was the best value CAIS Money could buy and now we have gone that step further by making a bigger and better CAIS our New Gen2 version. Kit includes, Everything you will need to be able to fit. 'Apart from Tools' 1x CAIS canister with Carbo fibre look end section, CNC billet pipe flange fitting and Red cotton conical style filtter Element. 3x Blue,Black, Orange or Red High Pressure Silicon hoses with the highest quality 100% stainless steel jubilee clips. 1x Black Powder coated CAIS canister mounting cradle with stainless fittings 1x ECU relocation brackets, these brackets safely relocate your ECU behind the n/s/f Head light 1x Colour, Step by step fitting instuctions. Fitting should take approx 3-4 hours depending on Tools and Mechanical skill.  Slightly Deeper induction noise over Standard , Gain Power and enhance the look of your Engine bay with a AutoSpecialists Gen2 CAIS.

Read more less

TECHNICAL DATA AIRTEC Motorsport charge cooler upgrade for Mercedes A45 AMG. AIRTEC have added to our ever growing catalogue of intercoolers and radiators, this charge cooler upgrade for the Mercedes A45 AMG. The perfect upgrade for any standard or remapped A45s. NOW ONLY COMES IN PRO-SERIES BLACK AND WITH BLACK HOSES  Registered Design Right number: 6022633 70mm thick500mm width150mm high 19mm pipes

Read more less

Currently made to order, please allow 2-3 weeks before dispatch. Suitable for Ford Focus Mk3 RS with standard front bumpers. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  As fitted to our Mk3 RS Demo car. Registered Design Right number 6012612

Read more less

Replaces very restrictive original twin intercooler setup with lengthy pipework, with an AIRTEC design high flow 60mm core intercooler and a shorter alloy boost pipe kit. We keep fast turbo spool up by using 50mm pipework from turbo to intercooler and 60mm out of the intercooler to help match the throttle body, this combination gives fast turbo spool up coupled with maximum power output. Dyno test results – results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC Run 1.  120 degree into the intercooler and 22 degree out of the intercooler Run 2.  122 degree into the intercooler and 22 degree out of the intercooler Run 3.  123 degree into the intercooler and 22 degree out of the intercooler The AIRTEC intercooler dropped the intake temperatures by 100 degree on each run and did not suffer from heat soak Features:     60mm thick proven bar and plate core, spec’d to AIRTEC design     AIRTEC branded cast end tanks for improved air flow and unbeatable strength     Dyno proven to provide lower intake temps and gain BHP     Shorter charge pipes than standard twin intercooler set-up, shorter pipes mean faster turbo spool up     Fitting takes approximately 2-3 hours     3 year unlimited mileage warranty     Available in Pro-Series Black     AIRTEC Logo available at no extra charge     Unbeatable value for money   Will fit Abarth 500 / 595 models fitted with the IHI turbo – 135, 140, 145 & 160 bhp models Approximate dimensions: Height – 205mm Width – 820mm Depth – 65mm   Registered Design Right number 6023445

Read more less

Replaces very restrictive original twin intercooler setup with lengthy pipework, with an AIRTEC design high flow 60mm core intercooler and a shorter alloy boost pipe kit. We keep fast turbo spool up by using 50mm pipework from turbo to intercooler and 60mm out of the intercooler to help match the throttle body, this combination gives fast turbo spool up coupled with maximum power output. Dyno test results – results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC Run 1.  120 degree into the intercooler and 22 degree out of the intercooler Run 2.  122 degree into the intercooler and 22 degree out of the intercooler Run 3.  123 degree into the intercooler and 22 degree out of the intercooler The AIRTEC intercooler dropped the intake temperatures by 100 degree on each run and did not suffer from heat soak Features:     60mm thick proven bar and plate core, spec’d to AIRTEC design     AIRTEC branded cast end tanks for improved air flow and unbeatable strength     Dyno proven to provide lower intake temps and gain BHP     Shorter charge pipes than standard twin intercooler set-up, shorter pipes mean faster turbo spool up     Fitting takes approximately 2-3 hours     3 year unlimited mileage warranty     Available in Pro-Series Black     AIRTEC Logo available at no extra charge     Unbeatable value for money   Will fit Abarth 500 / 595 models fitted with the IHI turbo – 135, 140, 145 & 160 bhp models Approximate dimensions: Height – 205mm Width – 820mm Depth – 65mm   Registered Design Right number 6023445 This intercooler will fit with the automatic paddle shift gearbox on the Fiat 500 Abarth

Read more less

Replaces very restrictive original twin intercooler setup with lengthy pipework, with an AIRTEC design high flow 60mm core intercooler and a shorter alloy boost pipe kit. We keep fast turbo spool up by using 50mm pipework from turbo to intercooler and 60mm out of the intercooler to help match the throttle body, this combination gives fast turbo spool up coupled with maximum power output. Dyno test results – results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC Run 1.  120 degree into the intercooler and 22 degree out of the intercooler Run 2.  122 degree into the intercooler and 22 degree out of the intercooler Run 3.  123 degree into the intercooler and 22 degree out of the intercooler The AIRTEC intercooler dropped the intake tempertures by 100 degree on each run and did not suffer from heat soak Features:     60mm thick proven bar and plate core, spec’d to AIRTEC design     AIRTEC branded cast end tanks for improved air flow and unbeatable stength     Dyno proven to provide lower intake temps and gain BHP     Shorter charge pipes than standard twin intercooler set-up, shorter pipes mean faster turbo spool up     Fitting takes approximately 2-3 hours     3 year unlimited mileage warranty     Available in Pro-Series Black     AIRTEC Logo available at no extra charge     Unbeatable value for money Will fit any Abarth with Garrett GTI446 Turbo – 165, 180 & 190 bhp models with the automatice paddle shift gearbox Will fit the following: Series 3 180 Competizione (Mid-Late 2015)Series 4 TurismoSeries 4 Competizione Approximate dimensions: Height – 205mm Width – 820mm Depth – 65mm Registered Design Right number 6023445

Read more less

Suitable for all 3dr MK7 Fiesta ST’s with standard front bumpers. Rear will fit any facelift Fiesta MK7 however front may need a slight adaption by a body shop to fit any “NONE ST’s” These arches are produced to a very high standard and require painting prior to install We HIGHLY recommend these are fitted by a bodyshop. They can be fitted without cutting existing arches, but depending how the car sits depends on the work needed. (Without cutting existing arches, you may not be able to sit as low as you want.)   Registered Design Right number 6012610

Read more less

Finally an off the shelf way to fit a Race Tow Strap, no bumper removal and then never using it because your to scared it may crack your bumper due to being bolted in a incorrect towing position  In Fords wisdom they made the original towing eye thread custom, this meant we have to make a tool just to cut the thread on the adapter, then we added a flat section so you can tighten it with a 19mm spanner Complete kit, Genuine TRS Tow strap, adapter boss and Tow strap fixing bolt  Easy fit zinc plated Tow strap machined adapter thread 'M10 Thread'  Short tow bolt will fit Focus Mk2 and Mk3 models both ST and RS variants, and also Mk6 Fiesta ST150 Thread avalable on it's own, or with the optional tow strap.

Read more less