dump valves

This is a piston design recirculation valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increasded or the engine has been modified. To ease installation the top or vacuum connection is angled.   In The Box:1 x FMDVF14R Valve1 x 2000mm of 4mm Vacuum Tube1 x 500mm of 6mm Vacuum Tube1 x Solenoid, Bracket, and Screws14 x Cable Ties1 x Uprated Blue Spring1 x Aluminium Machined Coupler1 x 4mm T Piece1 x 6mm T Piece1 x Wiring Harness1 x 6mm-4mm Plastic Reducer1 x M6 Nyloc Nut1 x Instructions1 x Forge Keyring and Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Blow Off Valve for Hyundai Genesis Sonata and Kia Sportage and Optima. The Forge direct replacement blow-off valve is designed to be a more durable and performance oriented valve than the OEM unit. The OEM valve is suitable for stock boost levels for a period of time, however, once boost pressure is raised, and after prolonged use, the stock valve will no longer be adequate. Raising the boost output of the vehicle will have a number of effects on the OEM valve. First and foremost, the additional boost pressure will quickly exceed the capacity of the OEM spring to keep the valve closed under higher boost levels. Since you cannot change the springs in the OEM valve, it cannot be adjusted for higher boost levels. Secondly, the additional heat generated by the increased boost will quickly deteriorate the OEM rubber valve diaphragm, which will also lose strength with repeated oscillations. The Forge valve uses full billet aluminum construction and Viton silicone o-rings that will withstand the highest boost levels and repeated abuse. It is also tunable for varying boost levels with the included spring tuning kit. If there is ever a problem with the valve such as a torn o-ring, replacements are available free of charge, and the valve is fully rebuildable. As the Genesis Coupe 2.0T does not use a MAF (mass air flow) sensor, there is no reason that the residual boost pressure at throttle lift cannot be vented to the atmosphere such as with this valve. The engine management does not meter the air volume entering the engine, so this residual pressure can be discharged without any adverse affects on the performance or driveability of the vehicle. Additionally, the valve being open at an idle or vacuum condition is a normal occurance, and is not indicative of a leaking valve. If the intake manifold is in vacuum, even while cruising at speed, the valve may be open. The OEM valve operates in this same manner, however, it is just not visible/audible because it is recirculating instead of vented to the atmosphere. Using a stiffer spring to keep the valve closed at a vacuum condition may result in too stiff of a spring tension to effectively discharge pressure at a throttle lift condition.   In The Box:1 x FMDVHGA Valve1 x Uprated Yellow Spring1 x Uprated Blue Spring3 x M6 x 16 Socket Cap Bolts3 x M6 Plain Washers3 x M6 Spring Washers1 x Forge Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This has been designed by Forge Motorsport as a direct replacement for the compressor bypass valve (CBV) that bolts directly to the turbo . It replaces the OEM diaphragm type valve with a piston design that allows for tuning with interchangable springs. For those running higher boost pressures after software tuning this really is a must to ensure that you do not lose boost through the valve.    In The Box:1 x FMDVRMR Valve1 x Uprated Yellow Spring1 x Uprated Blue Spring3 x M6 x 16 Socket Cap Bolts1 x Forge Sticker This product comes assembled with a green spring but is supplied with an additional uprated yellow spring. If your car is a Renault Megane RS250, 265, or 275, then this spring should be fitted instead of the stock green spring. If you wish to further tune this product to fit the needs of your engine, please see the spring tuning kit below.  Replaces OEM Part No. 55558627 (Saab) If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a piston design bypass valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified.  * To avoid the possibility of a P0101 trouble code, the ECM must be reprogrammed with a tune optimised for atmospheric discharge. We recommend the tuning services of Trifecta Performance: www.trifectaperformance.com   In The Box:1 x FMDVCS14A Valve1 x Uprated Yellow Spring1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a piston design blow off valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves, but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation, the top or vacuum connection is angled.   In The Box:1 x FMDVF14A Valve1 x 2000mm of 4mm Vacuum Tube1 x 500mm of 6mm Vacuum Tube1 x Solenoid, Bracket, and Screws14 x Cable Ties1 x Uprated Blue Spring1 x Aluminium Machined Coupler1 x 4mm T Piece1 x 6mm T Piece1 x Wiring Harness1 x 6mm-4mm Plastic Reducer1 x M6 Nyloc Nut1 x Instructions1 x Forge Keyring and Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Atmospheric blow off valve for the Fiat Grande Punto 1.4 T-Jet, Abarth and Abarth Essesse and Alfa Romeo Mito fitted with the T-Jet engine. The valve itself is of dual piston design for longevity with the ability to be tuned with replacement springs if required. If you require a recirculation valve please see FMDVPUNTR Please note: this product will NOT fit the 1.4 Multiair engine, please see our separate listing FMDVF14A    In the Box:1 x Atmospheric Valve1 x Wiring Harness1 x 2 Metres of Vacuum Hose10 x Cable Ties1 x Solenoid, Bracket, and Screws1 x M6 Socket Cap Screw1 x M6 Washer1 x 5mm Self Tapping Screw1 x P Clip2 x Vacuum Taps2 x Hose Clamps1 x Silicone Blanking Cap1 x Forge Sticker     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge Motorsport Blow Off style adaptor plate designed for the 1.4 Multi-air Turbo engine. This adapter plate is installed in combination with the OEM solenoid valve which will generate the "whoosh" or dumping noise. In The Box:1 x FMSPF14A Adaptor3 x M6 x 35 Socket Cap Bolts 1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A Pair of Forge Motorsport Recirculating valves for the Alfa Romeo Giulia Quadrifoglio. This product comprises of a pair of our solenoid operated valves that integrates seamlessly with the OEM electronics resulting in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. These valves are engineered to remedy the failure issues experienced with the OEM solenoid valves when the diaphragm or plastic piston fails which would effectively result in a boost leak. Forge valves use full billet alloy construction with a piston based internal design that provides significantly improved reliability, lightning fast response and will withstand additional tuning upgrades.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a piston design bypass valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified.  * To avoid the possibility of a P0101 trouble code, the ECM must be reprogrammed with a tune optimised for atmospheric discharge. We recommend the tuning services of Trifecta Performance: www.trifectaperformance.com   In The Box:1 x FMDVCS14A Valve1 x Uprated Yellow Spring1 x Forge Sticker

Read more less

Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2013-on VAG 1.8 TSI engine (US codes CPKA and CPRA) and 2.0 TSI engine (Euro code CNTA, CHHA, CHHB, CJXB and CJXC;US codes CPLA and CPPA)  including Golf MK7 R. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance, and absolutely NO fault codes or check engine lights, which isn’t something that can be said of our competition! Like our full replacement recirculating valve option, this valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. The later revision OEM valves have a longer lift but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. It has also been proven in cars running over 600bhp! This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the airfilter, older larger valves and sandwich plates will not fit this engine.   In The Box:1 x FMDVMK7A Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Uprated Blue Spring10 x Cable Ties1 x 1000mm of 4mm Vacuum Tube1 x 5mm T Piece1 x Instructions1 x Forge Keyring and Sticker

Read more less