Filters

The Audi S6 and S7 are impressive cars straight out of the box, yet when combined with Revo’s market leading software they come into a world of their own. In our search to extract more power from the mighty 4.0 TFSI engine, we quickly found that the stock air-box and filter became a major limitation for the car. During research and development, our in-house engineers worked with both the S7 and RS7 to analyse and compare the differences in each intake system, and how efficiently they performed. The direct replacement kit, which includes an RS7 air-box, Revo ProPanel filter and stepped silicone hoses was installed and tested on our in-house S7 development vehicle; the results were staggering. On our Dynopak hub dyno we saw dramatically improved power and torque throughout the rev-range, with consistent gains of +21WHP and +24NM with our Stage 2 software installed. BENEFITS Increases power and torque +21 WHP and + 24 NM gain OEM+ Look Custom designed Silicone hoses Revo ProPanel filter AIRBOX The S and RS air-box may look very similar at a glance, however after analysis and testing of both air-boxes, it was quite clear that the RS air-box had a tremendous amount of potential with a few essential improvements. The two inlet pipes have a larger 100mm diameter, allowing more air to flow with much less restriction compared to the 85mm stock air-box inlets. Revo software really allows the car to utilise this increase in airflow, all without compromising on the OEM look of the engine bay. SILICONE HOSES To compensate for the larger outlets on the RS7 air-box, we designed and developed two larger silicone hoses to join the air intake system to the engine. Revo’s flush fit designed silicone hoses connect to the air-box without any internal restriction, minimising turbulence and allowing a smoother flow of air to maximise performance. REVO PROPANEL FILTER The standard paper filter found in most vehicles performs well under normal conditions, however with increased power it becomes a major choking point in the system. Revo ProPanel filters work by trapping dirt particles within each of the oiled foam layers while allowing air to negotiate its way through, reducing restriction and offering much longer service intervals. We tested the filter at a leading motor testing centre ‘Mira’ on an industry recognised dust load test. On a full dust load test the foam filter was found to still be 99.3% efficient, filtering down to 5 micron while offering the least amount of restriction over similar products. FULL KIT The Revo 4.0 TFSi intake kit comes complete with RS7 air-box, Revo ProPanel filter, silicone hoses and fitting brackets. The kit offers an OEM+ look and fit, with no required modifications to the vehicle, finished off with an aluminium tag.   TESTING Revo 4.0 TFSI intake kit vs Stock     INTAKE PERFORMANCE FIGURES Engine Software Power Torque 4.0 TFSI Stage 2 + 21 BHP + 24 NM   *Maximum power and torque increases shown in testing when using Revo 4.0 TFSI intake system compared to stock intake on Audi S7   TECHNICAL DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the  Revo 4.0 TFSI Air Intake System Fitting Instructions     FITTING      Manufacturer Model Engine Year Audi S6 4.0 TFSI 2012 > Audi S7 4.0 TFSI 2012 >

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi RS3 (8P)  2.5 TFSI  2011 - 2015 Audi RSQ3  2.5 TFSI  2013 > Audi A3 (8P)  3.2 V6  2003 - 2012 Audi RSQ3  2.5 TFSi  2013 > Audi TTS  2.0 TFSi  2008 - 2014 Audi TTRS  2.5 TFSi  2011 - 2014 Audi TT  3.2 V6  2006 2010 Skoda Superb  3.6 V6  2008 - 2015 VW CC  3.6 V6  2012 > VW EOS  3.2 / 3.6 V6  2006 - 2010 VW Golf R32  3.2 V6  2005 - 2009 VW Passat  3.6 V6  2010 - 2015 VW Passat  3.2 / 3.6 V6  2005 - 2010   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Revo Air Intake System Seat Ibiza Cupra The Revo open cone Air Intake System for the Seat Ibiza Cupra improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo Software. Engineered to directly replace the stock airbox, pipe work and filter on the Seat Ibiza Cupra. The Revo System offers a high-quality open cone replacement complete with a heat shield to improve airflow and the performance of your vehicle. Key Features Increased performance +25HP at hubs & +30NM Torque Improves Air Flow Efficiency 53% Larger Hose & Inlet Volume Three Stage Foam Filter with Mesh OEM vs Revo When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and silicone hose which joins directly to the turbo inlet. Revo Flush Fit joins eliminate unwanted turbulence and increase the rate at which air can flow, ensuring maximum performance at all tuning stages. Silicone Hose The Revo silicone hose is designed to directly replace the plastic hose and rubber corrugated parts. An increased inlet diameter of 21% reduces restriction and promotes smooth airflow while an integrated wire helix reinforces the hose and prevents collapsing under negative pressure.   Machined Inlet The machined inlet replaces the restrictive OEM plastic elbow and is designed to securely fit to the OE unit using locking tabs and integrated O-rings. Only the Revo intake kit features an inlet almost double the cross-sectional area. This means air can stabilise and distribute before a smooth tapered transition to the turbo.   Filter and Heatshield Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points and rubber mounting bushings to provide an easy and secure installation.   Research and Development All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled Dyno testing. Airflow An overall air volume increase of 50% over the OE part allows for faster and increased airflow. The carefully designed silicone hose has its own support bracket mated to a machined hose fitting, maintaining the correct position during engine movement. A constant taper in the hose ensures a smooth transition of airflow from the air filter to turbo and results in an increase in air volume over stock. Further helped by the machined inlet that matches to the turbo inlet for the ultimate in airflow characteristics.   Dyno Graph Testing was carried out on a VW Polo GTI 1.8 TSI (6 Speed manual) with Revo Stage 1 Software fitted with the OEM system and then the Revo Air Intake System. With a consistent gain throughout the rev range, the Revo intake offered a peak gain of 20HP at the hubs and 20NM torque over the stock part. A maximum increase in airflow of upto +16 kg/hr gives impressive gains of 27HP @6100rpm and 30NM @4600RPM over using the stock intake system.   Fitment Vehicle Applications Manufacturer Model Engine Year Seat Ibiza Cupra 1.8 GTI 2016>   Please note: this product will not fit LHD vehicles. Documents The following documents are available to view: Fitting instructions Download the Revo Seat Ibiza Cupra Intake Instructions Notes Simple replacement of the OEM part

Read more less

Revo Air Intake System Ford Focus RS 2.3 EcoBoost With ample efficiency for a stock vehicle, the OEM system quickly becomes a choking point for the engine when running more power. The Revo Carbon Series Intake has been designed to promote smoother airflow. Keeping the stock air box helps eliminate heat soak whilst directing cold air through the new filter and 12% larger diameter carbon pipe. Each component has been specifically designed to ensure no air turbulence from joins. This increases the rate at which air can flow, ensuring maximum performance at all tuning stages. Key Features Increased performance Improves air flow efficiency Carbon Series Quality 12% Larger diameter pipe 3 Stage Foam Filter with mesh Carbon Pipe Design The Revo Carbon Pipe has been designed and manufactured from the highest quality 3k carbon to allow a specific bend radius that simply is not possible in aluminium without joins. The increased internal diameter of the pipe is designed to directly replace the plastic hose and rubber corrugated parts. This reduces restriction and maximises smoother airflow to improve both power and torque throughout the rev range. Silicone Hose There is two 4ply silicone hoses included, both offer smooth internals and flush-fit joins onto the carbon pipe for a smooth transition of air. This eliminates unwanted turbulence as the air transitions between parts. The constant taper of the turbo inlet hose allows the airflow time to adjust to the change in pressure, allowing the turbo to run more efficiently. Air Filter The cone shape of the Revo filter was designed to allow more free flowing air around the filter, helping reduce intake temperatures and increase performance, whilst the custom specification mesh allows the filter to keep its shape. The end of the filter has a specially designed spinning which returns into the filter channelling the air to the centre of the outlet, promoting smoother more direct airflow. Research and Development All Revo products are designed in-house and are rigorously tested. By utilising the latest 3D printing technology, the latest CAD and CFD programs, hub dyno and Revo data acquisition software we are able to ensure our products meet the high expectations of Only The Driven. The Revo carbon intake allows the RS turbo to run more efficiently, intake a larger volume of air and minimise turbulence. This increases power and torque, especially at the top end of the rev range as highlighted during controlled dyno testing. Airflow A constant taper in the hose ensures a smooth transition of airflow from the airbox to turbo and results in an increase in air volume over stock. Further helped by fully stepped internals that match to the outlet and inlet for the ultimate in airflow characteristics.Designed to fit in exactly the same way as the factory part, while the Revo kit has significantly increased the volume of airflow through the larger carbon pipe and smoother transitions, the same OE fit is retained. Dyno Graph Testing on the Revo Ford Focus RS fitted with a Revo Performance Pack, the Revo carbon series intake gave a healthy gain of 13WHP and 10NM at peak over the stock unit, with a consistent gain throughout the rev range.At higher RPM, a maximum increase airflow of 11 g/s allows the stage 2 package pulls together all the uprated components and gives an impressive 16whp and 18NM @ 6500rpmon using the stock intake. Fitment Vehicle Applications ManufacturerModelEngineYear Ford Focus RS 2.3 EcoBoost 2016>

Read more less

Everything you need for the power you crave. The Performance Pack includes Software, Intake System, Intercooler and Intercooler Pipes.   EVERYTHING YOU NEEDFOR THE POWER YOU CRAVE Enhanced power delivery, unique safety features and exhilarating response at your disposal, the Revo Performance Pack delivers much more than peak power figures. Whatever drives you, the Revo Performance Pack has it all. Engineered to perform, only Revo offers a complete tuning solution specifically designed for your vehicle. AIR INTAKE SYSTEM PERFORMANCESOFTWARE INTERCOOLER PIPE UPGRADE KIT INTERCOOLER     OPEN CONEAIR INTAKE SYSTEM Revo Open Cone Systems completely replace the OEM air intake for those who like to announce their vehicle is far from standard. Along with an aggressive intake sound, more air means access to more power throughout the rev-range. IncreasedDiameter DirectFlow PerformanceDesigned Learn more about this product PERFORMANCE ECU SOFTWARE Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev range while maintaining the extensive factory safety mechanisms. Revo Software offers a perfect balance of performance, economy, longevity, and safety so you can drive harder, for longer. OBDII PortInstalled Vehicle HealthCheck Authorised DealerSet-up Read More     INTERCOOLER PIPE UPGRADE As well as the Intercooler, the Revo Performance Pack also includes the Intercooler pipe upgrade.  It reduces charge system resistance and improves flow over the restrictive stock pipework. Featuring fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. DirectReplacement IncreasedDiameter DirectInternals Learn more about this product INTERCOOLER UPGRADE The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Unique design features lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software, ensuring you get consistent performance when you need it most. DirectReplacement UniqueFin Design MinimisedPressure Drop Learn more about this product     STOCK POWER200PS TORQUE320NM POWER262PS TORQUE395NM Find your nearest Revo Authorised Dealer Manufacturer Model Variant Engine Year Ford Puma ST 1.5 EcoBoost 2019 > Images shown are for illustration purposes only All Revo Software availability is ECU ID Dependant. Upgrade pricing for existing Revo Stage 1 ECU customers.  Terms and Conditions apply.  Performance data is taken from 2020 Ford Puma ST. Additional SPS Software Switch purchase required for some software features.  Pricing does not include the installation of parts, please contact your local Revo Authorised Dealer

Read more less

REVO AIR INTAKE SYSTEM VOLKSWAGEN POLO GTI The Revo open cone Air Intake System for the VW Polo GTi improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo Software. Engineered to directly replace the stock airbox, pipework and filter on the VW Polo GTi. The Revo System offers a high-quality open cone replacement complete with a heat shield to improve airflow and the performance of your vehicle. KEY FEATURES Increased performance +25HP at hubs & +30NM Torque Improves Air Flow Efficiency 53% Larger Hose & Inlet Volume Three Stage Foam Filter with Mesh OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and silicone hose which joins directly to the turbo inlet. Revo Flush Fit joins eliminate unwanted turbulence and increase the rate at which air can flow, ensuring maximum performance at all tuning stages. SILICONE HOSE The Revo silicone hose is designed to directly replace the plastic hose and rubber corrugated parts. Increased inlet diameter of 21% reduces restriction and promotes smooth airflow while an integrated wire helix reinforces the hose and prevents collapsing under negative pressure.   MACHINED INLET The machined inlet replaces the restrictive OEM plastic elbow and is designed to securely fit the OE unit using locking tabs and integrated O-rings. Only the Revo intake kit features an inlet almost double the cross-sectional area. This means air can stabilise and distribute before a smooth tapered transition to the turbo.   FILTER AND HEATSHIELD Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points and rubber mounting bushings to provide an easy and secure installation.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled Dyno testing. AIRFLOW An overall air volume increase of 50% over the OE part allows for faster and increased airflow. The carefully designed silicone hose has its own support bracket mated to a machined hose fitting, maintaining the correct position during engine movement. A constant taper in the hose ensures a smooth transition of airflow from the air filter to turbo and results in an increase in air volume over the stock part. Further helped by the machined inlet that matches to the turbo inlet for the ultimate in airflow characteristics.   DYNO GRAPH Testing was carried out on a VW Polo GTI 1.8 TSI (6 Speed manual) with Revo Stage 1 Software fitted with the OEM system and then the Revo Air Intake System. With a consistent gain throughout the rev range, the Revo intake offered a peak gain of 20HP at the hubs and 20NM torque over the stock part. A maximum increase in airflow of up to +16 kg/hr gives impressive gains of 27HP @6100rpm and 30NM @4600RPM over using the stock intake system.   FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Volkswagen Polo GTI 1.8 GTI 2015> Notes: Simple replacement of the OEM part Will not fit left-hand drive vehicles Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

A replacement conical filter, suitable for our 2.0 TFSI intake kits listed below. 2.0 TSI Air Filter Intake Kit   Notes: Simple replacement for the Revo Intake system Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000 Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)     FITMENT      Manufacturer Model Engine Year VW Amarok  2.0 TDI 2010> VW Amarok  2.0 TFSI 2010> VW Amarok  3.0 TDI V6 2016>   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000 Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi A3 (8P)  2.0 TFSI  2003 - 2012 VW Golf MK5  2.0 TFSI  2004 - 209 VW Golf MK6  2.0 TFSI  2009 - 2014 VW Passat  2.0 TFSI  2006 - 2011 VW  Jetta  2.0 TFSI  2005 - 2011 Audi TT  2.0 TFSI  2007 - 2010 Audi  S3 (8P)  2.0 TFSI  2007 - 2013 Seat  Leon  2.0 TFSI  2005 - 2013 Seat  Altea  2.0 TFSI  2006 - 2010 Seat  Toledo  2.0 TFSI  2005 - 2009 Skoda  Octavia  2.0 TFSI  2005 - 2013 VW  Scirocco  2.0 TFSI  2009 - 2015 VW  EOS  2.0 TFSI  2006 - 2015   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory air box and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High airflow with three layers of foam Lifetime warranty Cleanable (Every 10,000 Miles or 12 Months) Works with original manufacturers air box   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing airflow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full air flow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi A3 (8L)  1.8 T  1996 - 2003 Audi S3  1.8 T  1999 - 2003 Audi A3  1.9 TDI  1996 - 2003 Audi TT  1.8 T  1998 - 2006 Audi TT  3.2 VR6  2003 - 2006 Seat Leon  1.8 T  1999 - 2006 Seat Leon  1.9 TDI  1999 - 2006 Seat Leon  2.8 VR6  2001 - 2005 Skoda Octavia  1.8 T  1996 - 2010 Skoda Octavia  1.9 TDI  1996 - 2010 VW Bora  1.8 T  2000 - 2005 VW Bora  1.9 TDI  1998 - 2005 VW Bora  2.3 / 2.8  1998 - 2005 VW Golf MK4  1.8 T  1997 - 2006 VW Golf Mk4  1.9 TDI  1997 - 2006 VW Golf Mk4  2.3 / 2.8 / 3.2  1997  - 2006 VW Beetle  1.8 T  1998 - 2010 VW Beetle  1.9 TDI  1998 - 2010 VW Beetle RS  3.2 V6  2000 - 2001 VW Beetle  2.3 / 2.5  1999 - 2010 VW Polo GT  2.0  2008 - 2012  

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)   FITTING      Manufacturer Model Engine Variant Year Audi A1 1.4 TSI 140 PS 2012 > Audi A1 1.4 TSI 125/150 PS 2014 > Audi A3 1.2 TSI 105/110 PS 2013 > Audi A3 1.4 TSI 122/125/140 PS 2012 > Audi A3 1.4 TSI 150 PS 2014 > Audi Q3 1.4 TSI 150 PS 2013 > Seat Alhambra 1.4 TSI 150 PS 2010 > Seat Ibiza 1.2 TSI 90/110 PS 2015 > Seat Ibiza 1.4 TSI 140 PS 2013 > Seat Ibiza 1.4 TSI 150 PS 2015 > Seat Leon 1.2 TSI 86/105/110 PS 2012 > Seat Leon 1.4 TSI 110/122/140 PS 2012 > Seat Leon 1.4 TSI 125/150 PS 2014 > Seat Toledo 1.2 TSI 90/110 PS 2015 > Seat Toledo 1.4 TSI 125 PS 2015 > Skoda Fabia 1.2 TSI 90/110 PS 2014 > Skoda Octavia 1.4 TSI 140 PS 2013 > Skoda Octavia 1.2 TSI 86/105 PS 2013 > Skoda Octavia 1.2 TSI 110 PS 2015 > Skoda Octavia 1.4 TSI 110/122/150 PS 2013 > Skoda Rapid 1.2 TSI 90/110 PS 2015 > Skoda Rapid 1.4 TSI 125 PS 2015 > Skoda Superb 1.4 TSI 125/150 PS 2015 > Skoda Yeti 1.2 TSI 110 PS 2014 > Skoda Yeti 1.4 TSI 125 PS 2015 > Skoda Yeti 1.4 TSI 150 PS 2015 > VW Bettle 1.2 TSI 105 PS 2011 > VW Bettle 1.4 TSI 150 PS 2014 > VW CC 1.4 TSI 150 PS 2015 > VW Caddy 1.2 TSI 84 PS 2011 > VW Caddy 1.4 TSI 125 PS 2015 > VW Golf SV 1.2 TSI 86/110 PS 2014 > VW Golf SV 1.4 TSI 125/150 PS 2014 > VW Golf MK6 1.4 TSI 125/150 PS 2013 > VW Golf MK7 1.2 TSI 86/105/110 PS 2013 > VW Golf MK7 1.4 TSI 122/140 PS 2012 > VW Golf MK7 1.4 TSI 125/150 PS 2014 > VW Jetta 1.2 TSI 105 PS 2011 > VW Jetta 1.4 TSI 150 PS 2011 > VW Jetta 1.4 TSI 125/150 PS 2014 > VW Passat 1.4 TSI 125/150 PS 2014 > VW Polo 1.2 TSI 110 PS 2014 > VW Polo 1.4 TSI 150 PS 2014 > VW Scirocco 1.4 TSI 125 PS 2013 > VW Sharan 1.4 TSI 150 PS 2010 > VW Tiguan 1.4 TSI 125/150 PS 2015 > VW Tiguan 1.4 TSI 125 PS 2016 > VW Touran 1.2 TSI 110 PS 2015 > VW Touran 1.4 TSI 150 PS 2015 >   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)   FITTING      Manufacturer Model Engine Variant Year Audi A1 1.4 TSI 140 PS 2012 > Audi A1 1.4 TSI 125/150 PS 2014 > Audi A3 1.2 TSI 105/110 PS 2013 > Audi A3 1.4 TSI 122/125/140 PS 2012 > Audi A3 1.4 TSI 150 PS 2014 > Audi Q3 1.4 TSI 150 PS 2013 > Seat Alhambra 1.4 TSI 150 PS 2010 > Seat Ibiza 1.2 TSI 90/110 PS 2015 > Seat Ibiza 1.4 TSI 140 PS 2013 > Seat Ibiza 1.4 TSI 150 PS 2015 > Seat Leon 1.2 TSI 86/105/110 PS 2012 > Seat Leon 1.4 TSI 110/122/140 PS 2012 > Seat Leon 1.4 TSI 125/150 PS 2014 > Seat Toledo 1.2 TSI 90/110 PS 2015 > Seat Toledo 1.4 TSI 125 PS 2015 > Skoda Fabia 1.2 TSI 90/110 PS 2014 > Skoda Octavia 1.4 TSI 140 PS 2013 > Skoda Octavia 1.2 TSI 86/105 PS 2013 > Skoda Octavia 1.2 TSI 110 PS 2015 > Skoda Octavia 1.4 TSI 110/122/150 PS 2013 > Skoda Rapid 1.2 TSI 90/110 PS 2015 > Skoda Rapid 1.4 TSI 125 PS 2015 > Skoda Superb 1.4 TSI 125/150 PS 2015 > Skoda Yeti 1.2 TSI 110 PS 2014 > Skoda Yeti 1.4 TSI 125 PS 2015 > Skoda Yeti 1.4 TSI 150 PS 2015 > VW Bettle 1.2 TSI 105 PS 2011 > VW Bettle 1.4 TSI 150 PS 2014 > VW CC 1.4 TSI 150 PS 2015 > VW Caddy 1.2 TSI 84 PS 2011 > VW Caddy 1.4 TSI 125 PS 2015 > VW Golf SV 1.2 TSI 86/110 PS 2014 > VW Golf SV 1.4 TSI 125/150 PS 2014 > VW Golf MK6 1.4 TSI 125/150 PS 2013 > VW Golf MK7 1.2 TSI 86/105/110 PS 2013 > VW Golf MK7 1.4 TSI 122/140 PS 2012 > VW Golf MK7 1.4 TSI 125/150 PS 2014 > VW Jetta 1.2 TSI 105 PS 2011 > VW Jetta 1.4 TSI 150 PS 2011 > VW Jetta 1.4 TSI 125/150 PS 2014 > VW Passat 1.4 TSI 125/150 PS 2014 > VW Polo 1.2 TSI 110 PS 2014 > VW Polo 1.4 TSI 150 PS 2014 > VW Scirocco 1.4 TSI 125 PS 2013 > VW Sharan 1.4 TSI 150 PS 2010 > VW Tiguan 1.4 TSI 125/150 PS 2015 > VW Tiguan 1.4 TSI 125 PS 2016 > VW Touran 1.2 TSI 110 PS 2015 > VW Touran 1.4 TSI 150 PS 2015 >   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less