Performance - Audi A5 B9

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

CEUK ChromoLite Indicator Upgrade Tired of the orange look of your current indicator bulbs? Want something different? Well here you go! Our indicator bulbs are a mirror reflective silver colour, But still glow Bright Orange. Not only are they brighter than standard, but they enhance the look of your car dramatically by taking away the horrible orange of factory bulbs! These bulbs are the offset pin type, please check they are correct for your car before ordering. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Racingline Audi Paddle Shifters Please check the applications listed below. Cool, sharp and positive changes are guaranteed from our replacement S-Tronic blades for Audi B9 Platform A4/S4/RS4, A5/S5/RS5 S3/RS3/TTRS (flat bottomed). The new billet aluminium blades, unlike cheaper alternatives, completely replace the standard paddles. Look great, feel great with precision shifting. PERFORMANCE AT YOUR FINGERTIPSWe have extended the size of the paddles above and below the steering wheel spokes to make pulling that next gear easier in tight turns when your hands are busy steering. This ensures that your performance behind the wheel is never compromised. NEVER SETTLE FOR LESSThere are many cheap ‘stick-on’ paddles available. As a full replacement unit, the Racingline Performance Racingline Performance DSG Paddles are completely different. The ‘stick-ons’ rely on double-sided foam tape laid on top of the factory plastic paddles and this will never give the positivity or long term rigidity that car and driver deserve. EXQUISITE DETAIL AND EXCEPTIONAL QUALITYAs with all our upgrades, the quality and attention to detail on our Racingline Performance DSG Paddle Replacements is instantly apparent. The +/- symbols are delicately cut out of the top of each blade. Polished, then gloss-anodised in a choice of Piano Black or Titanium-Silver before a laser-etched Racingline logo is placed on the bottom of each blade as a discreet assurance of quality. SIMPLE FITTINGFitting Racingline Performance DSG Paddles couldn’t be easier. With long-nosed pliers, simply pull out the pin from underneath the standard paddle – and the paddle comes away. Position your new VWR DSG Paddle into place, slide the pin back in fully and you’re good to go. Note: Some steering wheel variations may require airbag removal, we advise professional fitting in these instances. Confirmed Applications (FOR A3/S3 WITH OPTION SPORT STEERING WHEEL) Audi S3 8V 2013-2020 Audi A3 8V 2013-2020 Audi RS3 2.5 TSI 8V evo 2017-2020 Audi TTS 3 2.0 TSI 8S 2015+ Audi TTRS 3 2.5 TSI 8S 2017+ Audi A4 B9 2015+ Audi A4 3.0 TDI B9 2015+ Audi S4 B9 2016+ Audi S4 TDI B9 2019+ Audi RS4 B9 2017+ Audi A5 B9 2016+ Audi A5 3.0 TDI B9 2016+ Audi S5 B9 2016+ Audi S5 TDI B9 2019+ Audi RS5 B92017+ Audi R8 2015+ Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR494100

Read more less

PF3-1660 is a polyurethane jack pad to fit into the plastic lifting points found on a large number of performance Audi vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle. OEM Part Number: 420803855A / 4S0803855B OEM Part Number: 4KE802847A / 4KE802847B OEM Part Number: 8K0802247B Size 80mm Diameter Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price FITS: AUDI A6 / S6 / RS6 C6 (2004/2011) AUDI A6 (2011-2018) AUDI A6 QUATTRO (2011-2018) AUDI S6 (2012-2018) AUDI A7 (2010-2017) Audi R8 (2006 - ON), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014) Audi A4 (2008-2016),  Audi A4 Quattro (2008 - 2016),  Audi RS4 (2012-2016),  Audi S4 (2009-2016),  Audi A5 (2007-2016),  Audi A5 Quattro (2007-2016),  Audi RS5 (2010 - 2016),  Audi S5 (2007 - 2016),  Audi A6 (2011 - ),  Audi A6 Quattro (2011 - ),  Audi RS6 (2012 - ),  Audi S6 (2012 - ),  Audi A7 (2010 - 2017),  Audi A7 Quattro (2010 - 2017),  Audi RS7 (2013 - 2017),  Audi S7 (2012 - 2017) ,  Audi R8 (2006 - ON),  Audi Q5 (2008-2017),  Audi Q5 Quattro (2008-2017),  Audi SQ5 (2013 - 2017),  Audi TT MK2 8J (2007-2014)  

Read more less

3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear!  It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!

Read more less

Description This is a performance enhancing induction kit for the following vehicles:  Audi A4 (B9) – 1.4 TFSI – 2016+ Audi A5 (8T) - 1.4 TFSI – 2016+ Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno result: Max gains +7.5hp @ 5300rpm +10nm @ 2600rpm Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to an already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the highest quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield and inlet pipe Red pleated filter Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015 Audi A4 (B9) 1.4 TFSI 2016 Audi A4 (B9) 1.4 TFSI 2017 Audi A4 (B9) 1.4 TFSI 2018 Audi A4 (B9) 1.4 TFSI 2019 Audi A4 (B9) 1.4 TFSI 2016 Audi A5 (B9) 1.4 TFSI 2017 Audi A5 (B9) 1.4 TFSI 2018 Audi A5 (B9) 1.4 TFSI 2019 Audi A5 (B9) 1.4 TFSI 2020 Audi A5 (B9) 1.4 TFSI

Read more less

Description This is a performance enhancing induction kit for the following vehicles: Audi A4 (B9) – 2.0 TFSI (with MAF Sensor) – 2015+ Audi A5 (8T) - 2.0 TFSI (with MAF Sensor) – 2015+ Features Improved throttle response Black powdercoated heat shield and inlet pipe Black silicone intake hose Dyno result: Max gains + 14.2hp @ 5200rpm and +17.6nm @ 3000rpm Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to an already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the highest quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield & inlet pipe with MAF adapter Black silicone inlet pipe Red pleated filter Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2015 Audi A4 (B9) 2.0T 2016 Audi A4 (B9) 2.0T 2017 Audi A4 (B9) 2.0T 2018 Audi A4 (B9) 2.0T 2019 Audi A4 (B9) 2.0T 2020 Audi A4 (B9) 2.0T 2021 Audi A4 (B9) 2.0T 2016 Audi A5 (B9) 2.0T 2017 Audi A5 (B9) 2.0T 2018 Audi A5 (B9) 2.0T 2019 Audi A5 (B9) 2.0T 2020 Audi A5 (B9) 2.0T 2021 Audi A5 (B9) 2.0T

Read more less

Description We introduce to you the IllumiNite D2S Bi Xenon replacement bulb upgrade!  A simple replacement unit, completely plug and play providing phenomenal results. Suitable for any D2S application including self leveling headlights. Upto 50% Brighter than OEM / Standard Headlights providing a safer driving experience at night but without causing glare to other drivers. Suitable for Projectors - Will not burn lenses! Technical Specs Colour: 6000K White Power: 12v / 35w Fitment: D2S Xenon / HID Pack Contents 2x D2S Bulbs Guarantee Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. 14 day Money back guarantee if unsatisfied Subject to product being returned at Buyers cost in a re salable condition!

Read more less

Description: When traveling Abroad, or even in the UK its always best to have a tyre inflator in your vehicle! 12v with fused cigerette lighter plug - up to 300psi. Complete with adapter kit for football and bicycle. 3mtr Cable - Enough to use even on large vehicles.

Read more less

Description: The Slime Smart Spair is "THE SMART WAY TO FIX FLATS FAST". No need to jack-up the car or remove the wheel - just install Slime tyre sealant, plug in the air compressor, turn it on, reinflate and go. Stow it under your car seat or in the boot - The Smart Spair offers a portable solution for flat tire repair. No need to remove the tyre. No need to wait for recovery assistance. Avoid dangerous roadside delays. Fix a flat fast - in 15 minutes or less! Emergency repair kit fixes a in 15 minutes No need to remove the tire 300psi 12v Tyre inflator with adapters included Includes a bottle of Slime tire sealant and a portable air compressor Seals punctures up to a quarter-inch Repairs punctures up to 6mm in tubeless tyres Comes with adapters to inflate mattresses, balls or other inflatables

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

The Revo Big Brake Kit comes complete with everything required to upgrade your stopping power. With Calipers and discs manufactured by industry leaders Alcon® and a floating system designed by our in-house engineers, each kit includes everything you need in one box; brake lines, brake pads, floating discs, mono-bloc calipers, brackets and even brake fluid.   Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALIPERS Our lightweight six-pot caliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The caliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the calipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads   TECHNICAL DOCUMENTS The following documents are available to view: FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.   FITMENT       Manufacturer Model Engine Year Audi A4 (B9) Various  2016 - Present  Audi S4 (B9) 3.0 TFSI  2016 - Present Audi A5 (B9) Various  2017 - Present Audi S5 (B9) 3.0 TFSI  2017 - Present Audi Q5 (FY) Various  2017 - Present Audi SQ5 (FY) 3.0 TFSI  2017 - Present   Notes: Recommended Revo Authorised Dealer Fitment only Please follow the bedding in procedure  Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less