Performance - Audi S1 8X

RTS Performance Brake Discs – Front Fitment (RTS-7551F)   RTS Performance has developed a comprehensive range of Brake Discs and Pads for all vehicles.  RTS Performance Brake Discs are a direct OE replacement that dissipates heat and allows gases to escape much more efficiently than your factory brake discs. This provides the driver with more positive feedback in Braking Performance. Moreover, Our design prevents the forming of service cracks and can, therefore, withstand harder driving and higher temperatures.  All Performance Braking is manufactured in the United Kingdom and undergo rigorous testing to meet G3500 and ECR90 quality accreditation. Read more about our Performance Brake Discs. Suitable for the following Cars Audi S1

Read more less

VBT Grooved Rear Brake Discs 272mm - Audi S1 Grooved direct replacement brake discs from Vagbremtechnic. The price is for 1 pair of discs

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.

Read more less

Racingline Stage 2 ‘EVO’ Polo (6R/6C), S1 (8X), Ibiza (6J) Monoblock Performance Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652001-RED) or Black (VWR652001-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 330mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Polo Mk5 GTI (6R/6C) 2010-2017 > Audi S1 (8X) 2014+ > SEAT Ibiza (6J) 2015-2018 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR652001

Read more less

K-SPORT brake kits are manufactured in a TUV/ISO 9001:2008 certified factory. The K-SPORT fitment range is class leading, with approximately 700 vehicle platforms being covered. In many cases K-SPORT offer a number of different front and rear kit options for each vehicle platform in their catalogue. The kit includes 2-piece disc assemblies. The disc friction rings feature directional, curved internal cooling vanes that flow far more air than the traditional straight vanes found in the majority of original equipment discs. This additional airflow results in cooler operating temperatures, reduced brake fade and improved disc life. The lightweight alluminium disc hats reduce weight, resulting in the large diameter disc assemblies often weighing less than the original equipment 1-piece cast-iron discs that they are replacing.   The calipers in the kit are lightweight aluminium 6-piston units. They are far more rigid than single or twin-piston OEM sliding caliper designs, resulting in less caliper flex and improved pedal feel. The calipers are designed around a pad profile that offers substantially more pad volume than most OEM pad profiles, resulting in improved pad wear life. This pad profile is manufactured by just about every high-performance and race pad manufacturer on the world market, making it easy for customers to source a wide variety of pad options in future. The kit includes:  2 x K-Sport 356mm brake discs including bells & hardware  2 x K-Sport 8 piston calipers  2 x Stainless steel braided brake hoses  2 x Caliper mounting brackets and all necessary mounting hardware for complete bolt on installation.  *Select your pad option Below* You May Require a Spacer when fitting this kit with STD wheels Please Note the Pic is a Library Item and may vary slightly These kits are made to order by K Sport - general dispatch can be upto 6 weeks.

Read more less

Revo Big Brake Kit Upgrade Improves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. This Revo brake kit has been manufactured in conjunction with world-leading brake manufacturer Alcon; utilising over 30 years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in-house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track CALLIPERS Our lightweight four-pot calliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel, and overall braking performance. The calliper incorporates a progressive four-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent grooves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the callipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brake systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids.   KIT CONTENTS Revo by Alcon Caliper x2 Revo by Alcon Discs x2 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads   TECHNICAL DOCUMENTS The following documents are available to view: BIG BRAKE KIT TEMPLATE Download the Revo Big Brake Fitting Template   FITMENT      Manufacturer Model Engine Year Audi S1 2.0 TSI 14 -   Notes: Recommended Revo Authorised Dealer Fitment only.  Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less