Performance - Audi S3 8P

RTS Performance Brake Pads – Front Fitment (RT62-5389F)   RTS RT62 Fast Road & Track Brake Pads RTS “RT62” brake pads are designed to be driven hard and offer high performance non – aggressive unique stopping power.RTS brake pads can be applied as a straight replacement throughout a full range of car manufacturers and offer a precise fit to any standard callipers. Benefits of the RT62 Brake Pads None aggressive friction technology Install and forget confidence to all callipers Efficient and responsive braking from cold to hot temperatures Chamfered edge friction creates a more responsive and smoother braking feel Excellent sheer strength resistance Nominal friction coefficient 0.41 Excellent wear, fade and vibration free characteristics Available in sets of front and rear pads across an extensive range of performance applications To be used for Fast Road and Track Use. Learn More about our Performance Brake Pads. Suitable for the following Cars Audi A3 (8P) Audi S3 (8P) SEAT Leon (Mk2) Volkswagen Golf (MK5/6) Volkswagen Scirocco ECE R90 accreditation is a legal requirement for all brake pads to meet European standards, RTS RTS62 pads have passed vigorous testing to meet the highest requirements and give outstanding braking capabilities on road/track days in wet and dry working conditions.

Read more less

RTS Performance Brake Discs – Rear Fitment (RTS-2243R)   RTS Performance has developed a comprehensive range of Brake Discs and Pads for all vehicles.  RTS Performance Brake Discs are a direct OE replacement that dissipates heat and allows gases to escape much more efficiently than your factory brake discs. This provides the driver with more positive feedback in Braking Performance. Moreover, Our design prevents the forming of service cracks and can, therefore, withstand harder driving and higher temperatures.  All Performance Braking is manufactured in the United Kingdom and undergo rigorous testing to meet G3500 and ECR90 quality accreditation. Read more about our Performance Brake Discs. Suitable for the following Cars Audi A3/S3 (8P) Audi A3/S3 (8V) Audi TT (8J) Audi TT (8S) Seat Leon (MK2) Seat Leon (MK3) Skoda Octavia Volkswagen Golf (MK5) Volkswagen Golf (MK6) Volkswagen Golf (MK7)

Read more less

RTS Performance Brake Discs – Front Fitment (RTS-2251F)   RTS Performance has developed a comprehensive range of Brake Discs and Pads for all vehicles.  RTS Performance Brake Discs are a direct OE replacement that dissipates heat and allows gases to escape much more efficiently than your factory brake discs. This provides the driver with more positive feedback in Braking Performance. Moreover, Our design prevents the forming of service cracks and can, therefore, withstand harder driving and higher temperatures.  All Performance Braking is manufactured in the United Kingdom and undergo rigorous testing to meet G3500 and ECR90 quality accreditation. Read more about our Performance Brake Discs. Suitable for the following Cars Audi A3 (8P) Audi S3 (8P) SEAT Leon Cupra ‘R’ (Mk2) Volkswagen Golf (MK5/6) Volkswagen Scirocco

Read more less

We are extremely please to be able to introduce this kit to our portfolio. The kit compromises of 2x AP Radical II 6 port calipers, VBT custom made caliper brackets made from 7075 series aluminium, caliper mounting bolts and washers, custom made front brake lines and a set of Ferodo Racing DS2500 brake pads. This kit is designed to be a direct fit to the Mk8 Golf R but can be retro fitted to the Mk8 Golf GTi as well as Mk6/7 Golf GTI and Golf R if you purchase the Mk8 Golf R discs. The kit can also be upgraded to 390mm AP Racing discs at a later date with the addition of brackets, bells, rotors and bells mounting kit making this one of the most versatile kits we've ever produced. Notes: Other brake pads are available. Please call to discuss options. It is recommended to dry fit this kit to make sure you get enough wheel clearance. Wheel spacers maybe required to clear some wheels.   FITS: AUDI S3 8P AUDI S3 8V SEAT LEON MK3 5F SKODA OCTAVIA MK3 5E VW GOLF MK6 VW GOLF MK7 VW GOLF MK8

Read more less

This disc installation kit comes with everything you need to install our 1 piece 350x32mm front brake discs. Excluding calipers & pads. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 1 piece brake discs are 350x32mm from a different vehicle manufacturer which we have modified to allow fitment to your car. We machine the discs to offer them in either Hooked, Grooved or Dimpled. We also include hub centering rings which reduce the larger center bore of these discs to match VAG hubs to ensure correct fitment. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. New pads are highly recommended to be installed. Included in our kit:2x Caliper carriers2x 350x32 1 piece front brake discs2x Disc mounting screws2x Centre bore reducing rings1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:Porsche 996TT Calipers (Part #s 996.351.429 & 996.351.430)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.  

Read more less

Racingline Stage 2 ‘EVO’ Golf 5/6, Scirocco, Mk2 Cupra Monoblock Performance Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652003-RED) or Black (VWR652003-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 5 GTI 2005-2008> VW Golf 5 R32 2005-2008> VW Golf 5 GTI ED30/Pirelli 2006-2007> VW Golf 6 GTI 2009-2014> VW Golf 6 R 2009-2014> VW Scirocco R 2009-2017> VW Jetta V GLI 2005-2011> VW Jetta VI GLI 2011-2018 > Audi S3 8P 2006-2012> Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012> SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR652003

Read more less

A Big Brake kit with 6 pot calipers and 356 x 32mm ventilated discs. The discs are grooved to remove braking residuals and maintain optimum performance. Included in the kit are Forge braided brakes hoses, mountings, and brake pads. This kit is suitable for the VW Mk5 Golf including R32, Golf Mk6/Mk7, Audi A3, TTRS, TTS, VW Scirocco, 2013 model VW Beetle, as long as they are fitted with 18inch or larger wheels. If you are running stock VW wheels, you may need to fit a 5mm spacer in order to clear the back of the spokes. To download our fitment template click here. This brake kit is supplied with either our Forge Ceramic Brake Pads (FMBKPAD) or  EBC Yellow Pads. For further information on EBC pads please see EBC website. Depending on your wheel design, you may need spacers between the hub and the wheel in order to clear the calipers. These kits do not have CE / TUV approval and are recommended for race use only Each Caliper weighs 3.25kg Each Disc weighs 9.35kg Torque Settings: Carrier to Hub 260NM Caliper to Carrier 139NM   Colour Code: Dark Blue- ZAK Beam Blue Download our guide on how to clean and maintain your Forge Motorsport Big Brake Kit Please Note: Forge Motorsport or its resellers will not offer any warranty or replacement if brake vibration, abnormal pad wear, caused by uneven discs which has resulted after poor and incorrect installation.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALLIPERS Our lightweight six-pot calliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The calliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the callipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads   TECHNICAL DOCUMENTS The following documents are available to view: FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.   FITTING      Manufacturer Model Engine Year Audi A3 (8P) All 2003-2012 Audi S3 (8P) 2.0 TFSI 2003-2012 Seat Leon MK2 All 2005-2012 Skoda Octavia Mk2  All 2004-2013 VW Golf MK5/6 All 2003-2012 VW Scirocco All 2003-2012   Notes: Recommended Revo Authorised Dealer Fitment only Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less