Performance - Audi S3 8P

Non-resonated (louder). Polished Tips GT80 Part No. Description Tailpipe Pipe Diameter Race EC MSAU289REP Centre Section Replacement Pipe 2.75" (69.85mm) MSAU347 Rear Silencer Twin 80mm GT80 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

with 200 Cell Race Cat. For Fitment to Milltek Sport 2.75' cat-back systems only. Requires a Stage 2 ECU remap Part No. Description Tailpipe Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU200R Cast Downpipe with Race Cat - with 200 Cell Race Cat. For Fitment to Milltek Sport 2.75' cat-back systems only. Requires a Stage 2 ECU remap 76.2 3 No 3 No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap Part No. Description Tailpipe Pipe Diameter Race EC MSVAG02 Downpipe and Hi-Flow Sports Catalyst 3.00" (76.20mm) MSAU343 Connecting Pipe Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Must be fitted with the Milltek Sport 2.75" cat-back system and requires a Stage 2 ECU remap Part No. Description Tailpipe Pipe Diameter Race EC SPF2861-80 or SPF3365-80 SuperPro Lower Engine Mount Insert MSVAG04 Cast Large Bore Downpipe with De-cat 3.00" (76.20mm) Yes MSAU343 Connecting Pipe Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Resonated. Requires a Stage 2 ECU remap. Ceramic Black Tips Part No. Description Tailpipe Pipe Diameter Race EC MSAU342 Downpipe and Hi-Flow Sports Catalyst 2.75" (69.85mm) MSAU343 Connecting Pipe MSAU289 Centre Section MSAU583 Rear Silencer Twin Ceramic Black GT80 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Resonated. Requires a Stage 2 ECU remap. Polished Tips GT80 Part No. Description Tailpipe Pipe Diameter Race EC MSAU342 Downpipe and Hi-Flow Sports Catalyst 2.75" (69.85mm) MSAU343 Connecting Pipe MSAU289 Centre Section MSAU347 Rear Silencer Twin 80mm GT80 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Resonated (quieter) Polished Tips Part No. Description Tailpipe Pipe Diameter Race EC MSAU119 Resonated Centre Section 2.75" (69.85mm) MSAU379 Rear Silencer Twin 76.2mm Special Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, standard catalyst, centre and rear sections. The high flow sports cat version will enable you to pass a UK MOT emissions test or police road side checks. The de-cat sports exhaust is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks.åÊ The resonatedåÊoption includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note.åÊ All relevant fittings and gaskets are supplied. (Except turbo gasket). Press Release Delivering an even harder performance edge to Audi's brilliant S3 is the new Cobra Sport performance exhaust with staggering 24% and 26% increases in power and torque respectively. Cobra Sport's Sales Manager, Matt Thomas says, "The Audi S3 continues to delight drivers with its superb all-round performance and the Cobra Sport objective has been to further enhance what is a totally involving driving experience on both road and track. Designed and manufactured to uncompromising standards of quality and excellence that complement a superb design we have matched amazing performance and looks that are simply awesome." Cobra Sport's testing showed that the standard OE system produced a more than healthy 259 bhp. However, with the Cobra Sport turbo back system with de-cat, including the mandatory re-map, the figure increases to 321.5 bhp, which is a massive 24% gain. Similarly, torque increases from 249 ft per lb / 337.5 Nm to 314 ft per lb / 425 Nm, a gain of 26%. The outstanding power results are complimented by a significant increased weight advantage, the Cobra Sport Cat-back system weighing in at just 17.7 kg, which is 32.5% less than the OE system's 26.24 kg. The results achieved with the Audi S3 speak for themselves, anyone who is seriously interested in increasing the power output of their S3 simply cannot overlook the Cobra Sport system when selecting a performance exhaust. Great sound comes as standard with Cobra Sport. The unbelievable resonated sound quality is pitch perfect, behind the wheel or on the start line. Yet under load, part throttle or idle the volume is only marginally higher than a standard exhaust. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish. Media Example of Audi S3 Sports Exhaust (Resonated turbo back system with de-cat front pipe). Example of Audi S3 Sports Exhaust (Non resonated turbo back system with De-Cat front pipe). Example of Audi S3 Sports Exhaust (Non resonated turbo back system with De-Cat front pipe). British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology. åÊ åÊ

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Audi S3 performance exhausts are made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note.åÊ All relevant fittings and gaskets are supplied. Please note - Fitted images show the non-resonated cat back configuration. Press Release Delivering an even harder performance edge to Audi's brilliant S3 is the new Cobra Sport performance exhaust with staggering 24% and 26% increases in power and torque respectively. Cobra Sport's Sales Manager, Matt Thomas says, "The Audi S3 continues to delight drivers with its superb all-round performance and the Cobra Sport objective has been to further enhance what is a totally involving driving experience on both road and track. Designed and manufactured to uncompromising standards of quality and excellence that complement a superb design we have matched amazing performance and looks that are simply awesome." Cobra Sport's testing showed that the standard OE system produced a more than healthy 259 bhp. However, with the Cobra Sport turbo back system with de-cat, including the mandatory re-map, the figure increases to 321.5 bhp, which is a massive 24% gain. Similarly, torque increases from 249 ft per lb / 337.5 Nm to 314 ft per lb / 425 Nm, a gain of 26%. The outstanding power results are complimented by a significant increased weight advantage, the Cobra Sport Cat-back system weighing in at just 17.7 kg, which is 32.5% less than the OE system's 26.24 kg. The results achieved with the Audi S3 speak for themselves, anyone who is seriously interested in increasing the power output of their S3 simply cannot overlook the Cobra Sport system when selecting a performance exhaust. Great sound comes as standard with Cobra Sport. The unbelievable resonated sound quality is pitch perfect, behind the wheel or on the start line. Yet under load, part throttle or idle the volume is only marginally higher than a standard exhaust. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish. Media Example of Audi S3 Sports Exhaust (Turbo back - de-cat and resonated). British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, standard catalyst, centre and rear sections. The high flow sports cat version will enable you to pass a UK MOT emissions test or police road side checks. The de-cat versionåÊis sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks.åÊ The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. (Except turbo gasket). Press Release Delivering an even harder performance edge to Audi's brilliant S3 is the new Cobra Sport performance exhaust with staggering 24% and 26% increases in power and torque respectively.Cobra Sport's Sales Manager, Matt Thomas says, "The Audi S3 continues to delight drivers with its superb all-round performance and the Cobra Sport objective has been to further enhance what is a totally involving driving experience on both road and track. Designed and manufactured to uncompromising standards of quality and excellence that complement a superb design we have matched amazing performance and looks that are simply awesome." Cobra Sport's testing showed that the standard OE system produced a more than healthy 259 bhp. However, with the Cobra Sport turbo back system with de-cat, including the mandatory re-map, the figure increases to 321.5 bhp, which is a massive 24% gain. Similarly, torque increases from 249 ft per lb / 337.5 Nm to 314 ft per lb / 425 Nm, a gain of 26%. The outstanding power results are complimented by a significant increased weight advantage, the Cobra Sport Cat-back system weighing in at just 17.7 kg, which is 32.5% less than the OE system's 26.24 kg. The results achieved with the Audi S3 speak for themselves, anyone who is seriously interested in increasing the power output of their S3 simply cannot overlook the Cobra Sport system when selecting a performance exhaust. Great sound comes as standard with Cobra Sport. The unbelievable resonated sound quality is pitch perfect, behind the wheel or on the start line. Yet under load, part throttle or idle the volume is only marginally higher than a standard exhaust. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish. Media Example of Audi S3 Sports Exhaust (Resonated turbo back system with de-cat front pipe). Example of Audi S3 Sports Exhaust (Non resonated turbo back system with De-Cat front pipe). Example of Audi S3 Sports Exhaust (Non resonated turbo back system with De-Cat front pipe). British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Audi S3 performance exhausts are made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release Delivering an even harder performance edge to Audi's brilliant S3 is the new Cobra Sport performance exhaust with staggering 24% and 26% increases in power and torque respectively. Cobra Sport's Sales Manager, Matt Thomas says, "The Audi S3 continues to delight drivers with its superb all-round performance and the Cobra Sport objective has been to further enhance what is a totally involving driving experience on both road and track. Designed and manufactured to uncompromising standards of quality and excellence that complement a superb design we have matched amazing performance and looks that are simply awesome." Cobra Sport's testing showed that the standard OE system produced a more than healthy 259 bhp. However, with the Cobra Sport turbo back system with de-cat, including the mandatory re-map, the figure increases to 321.5 bhp, which is a massive 24% gain. Similarly, torque increases from 249 ft per lb / 337.5 Nm to 314 ft per lb / 425 Nm, a gain of 26%. The outstanding power results are complimented by a significant increased weight advantage, the Cobra Sport Cat-back system weighing in at just 17.7 kg, which is 32.5% less than the OE system's 26.24 kg. The results achieved with the Audi S3 speak for themselves, anyone who is seriously interested in increasing the power output of their S3 simply cannot overlook the Cobra Sport system when selecting a performance exhaust. Great sound comes as standard with Cobra Sport. The unbelievable resonated sound quality is pitch perfect, behind the wheel or on the start line. Yet under load, part throttle or idle the volume is only marginally higher than a standard exhaust. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish. Media Example of Audi S3 Sports Exhaust (Turbo back - de-cat and resonated). British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology. åÊ åÊ

Read more less

Scorpion Exhausts Audi S3 8P Non-resonated cat-back system Fits Years 2006 to 2012 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAUS074 Product Type Cat-Back Resonated Non-resonated Fitment Years 2006 - 2012 Fits To OEM / Scorpion Model Fitment S3 (8P) Pipe Diameter 70mm/2.75" * Tailpipe Daytona (twin) Tailpipe Diameter 90mm Shipping Dimensions 90cm x 78cm x 26cm OEM Scorpion Change Power Difference 243.3 BHP 259.9 BHP +16.6BHP Weight Difference 17.4 KG 15.6 KG -1.8 KG

Read more less