Performance - Golf MK7

Racingline Performance - Upper Gearbox Mount Fits:* Golf Mk7 GTI* Golf Mk7 R* Leon Cupra 280* A3 8V* S3 8V* Octavia vRS Mk3 To harness your power increases, and transfer that power to the road or track where you need it, Racingline Performance Engine Mounts will give a much more solid drive, and crucially give additional durability. The Racingline Performance Engine Mounts are certainly not one of the most exciting or visual modifications that you can do to your car! But they are truly one of the most worthwhile for anyone who appreciates the driving dynamics of their car. Almost everyone who tries these mounts on a Golf or Scirocco wants them. WHAT DO THE ENGINE MOUNTS DO?The whole engine and gearbox is located in only three places. One at engine-side plus another at the end of the gearbox which support the weight of the whole drivetrain, plus a third torque arm underneath the engine to contain the fore-aft movement (often called the pendulum or dog-bone mount). The standard car uses very compliant rubber in these mounts to give a soft take-up of power and isolate the cabin from drivetrain noise. For a daily driven standard car, these bushings do a good job of keeping cabin vibration to a minimum. But when you ask more of these mounts, with higher power or hard driving, the flex in the bushes becomes very noticeable. This gives a slightly loose feeling to the drivetrain and an increased chance of wheel-hop under hard acceleration as the whole engine and 'box assembly judders. If your car produces high power, or has covered quite a few road miles, or is driven hard, the softness of these three standard rubber mounts allows more and more movement as you come on and off the power. With worn mounts, we have even seen failures of the exhaust manifold and driveshafts as the whole drivetrain shifts around under load. WHAT DIFFERENCE DO THE Racingline Performance MOUNTS MAKE?The Racingline Performance engine mounts stiffen the whole location of the drivetrain greatly to give a much crisper feeling to your car. This means no more jerky behaviour on and off the throttle or when you change gear, and all-but eliminates 'wheel hop' off the line. Of course, a bit more noise from the drivetrain comes into the cabin, but most keen drivers love the sense that they are more 'connected' to their car. As opposed to some aftermarket 'push in' bushes which crudely fill the voids in the factory mounts, the Volkswagen units are completely redesigned replacement mount assemblies. We specify a stiff urethane of 75A durometer which allows some movement within the mounts, and filters much of the drivetrain's vibration but with a design that very significantly reduces the movement on each. For most road cars, we'd recommend the lower engine mount on its own, leaving the two upper mounts standard. This makes a huge difference to how the car drives, and is a pretty minimal difference to the cabin refinement. The lower engine mount on its own is one of our most popular upgrades for Golfs and Sciroccos. For more heavily modified, track and motorsport cars, all three mounts should be upgraded.

Read more less

Racingline Performance Front Adjustable Drop LinksRace Proven for your Road Car - The Racingline adjustable drop links are an essential upgrade to any lowered or performance car. If you've lowered your car, Racingline's Adjustable Drop Links are an essential upgrade to zero the pre-load on your anti-roll bar geometry, plus add stiffness and precision by replacing the stock rubber joints with ball joints.The drop link attaches the front anti roll bar ends to the front damper. The OEM links were made the length they are for a reason - to compliment the standard ride height.But when you lower ride height, the car will now be pulling your anti roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle.Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners.These links were developed for the VW Cup race cars to allow the anti roll bar to work the way it should. Adjusting the height of droplinks to the equivalent of the lowering amount is a must.Available in two lengths:- 250mm for cars running standard ride height or with lowering springs or a reasonable drop on coilovers.- 200mm length for cars custom suspension setups on the track.

Read more less

Racingline Performance Sport Spring Set for the Golf Mk7 'R' Estate Lowering Range:* 20mm Front and Rear Racingline Performance Sport Springs are engineered to replace the standard springs with a shorter and stiffer spring, while lowering the centre of gravity they will also help to reduce body roll for better handing over the standard springs and while offering fantastic ride quality and comfort, which can be improved from the standard ride on some applications. These springs have been designed to work in harmony with the standard dampers so no other changes are needed. Racingline Performance Sport Springs are for customers who demand performance over the stock setup without costing thousands! The spring range offered by Racingline Performance are not designed to drastically lower the vehicle, however for those of you who do want this you can look at the Racingline Performance range of coilover kits.

Read more less

Racingline Performance Sport Spring Set for the Golf Mk7 'GTD' Estate Lowering Range:* 25mm Front* 20mm Rear Racingline Performance Sport Springs are engineered to replace the standard springs with a shorter and stiffer spring, while lowering the centre of gravity they will also help to reduce body roll for better handing over the standard springs and while offering fantastic ride quality and comfort, which can be improved from the standard ride on some applications. These springs have been designed to work in harmony with the standard dampers so no other changes are needed. Racingline Performance Sport Springs are for customers who demand performance over the stock setup without costing thousands! The spring range offered by Racingline Performance are not designed to drastically lower the vehicle, however for those of you who do want this you can look at the Racingline Performance range of coilover kits.

Read more less

A replacement filter for the Racingline Performance / Racingline Performance ‘R600’ Induction Kit Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Audi S3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Racingline Cup Edition Intake System VWR12G7CUP The VWR Cold-Air Intake System kit delivers cold fresh air from outside the engine bay straight to your engine via a large-diameter free-flowing intake pipe. The intake uses an oversize domed High-Flow TriFoam™ air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow with lower restriction, to ensure that the largest volumes of the coolest possible air is available to the engine at all times. This maximizes efficiency and improves driveability and torque throughout the rev range – turbocharger spool dropped nearly 500 RPMs, reducing turbo lag and creating faster turbo response. Racingline Open Cone Intake The intake uses a fully formed black powder-coated aluminum shield which separates the high flow triple-layer filter from the hot air of the engine bay.  The shield extends not only up to the underside of the hood/bonnet, but also underneath the filter unit ensuring the best possible separation of cold, fresh air from the heated air of the rest of the under-bonnet area. As a race-bred intake system, you can hear the rich induction noise as soon as you first accelerate hard.  With the increased airflow from this system, you will also not miss the sound of the diverter valve opening when you lift between gears. Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Audi TTS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Arteon (2017-present) Volkswagen Golf Mk7 2012-present

Read more less

Golf Mk7 ‘R’ Estate Spring and Damper Kit Racingline Performance Dampers: When it comes to sport dampers the compromise between performance and comfort has been a persistent dilemma for keen drivers and enthusiasts. With the RacingLine Performance Sport Damper kit, which consists of two front and two rear shocks, this dilemma becomes a thing of the past for MQB multi-link platform at an affordable price. Fitting the RacingLine Performance Sport Damper kit ensures superior road-holding and a positive transformation in handling characteristics without compromising comfort. Our Sport Dampers are designed to maximise comfort and performance on all road conditions, and driving styles; guaranteeing greater stability, control and therefore driving pleasure. Racingline Performance Lowering Springs are also included within this kit Lowering Range:20-25mm Front and Rear Special Notes:Not suitable for 3-door and 5-door Hatch ModelsOnly suitable for Estate/Wagon ModelsNot suitable for vehicles with DCC / Magnetic ride Suspension   Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Volkswagen Golf Mk7 2012-present

Read more less

Golf Mk7 ‘R’ Hatch Spring and Damper Kit Racingline Performance Dampers: When it comes to sport dampers the compromise between performance and comfort has been a persistent dilemma for keen drivers and enthusiasts. With the RacingLine Performance Sport Damper kit, which consists of two front and two rear shocks, this dilemma becomes a thing of the past for MQB multi-link platform at an affordable price. Fitting the RacingLine Performance Sport Damper kit ensures superior road-holding and a positive transformation in handling characteristics without compromising comfort. Our Sport Dampers are designed to maximise comfort and performance on all road conditions, and driving styles; guaranteeing greater stability, control and therefore driving pleasure. Racingline Performance Lowering Springs are also included in this kit. Lowering Range:20-25mm Front and Rear Special Notes:Only suitable for 3-door and 5-door Hatch ModelsNot suitable for ‘ST’ Estate/Wagon ModelsNot suitable for vehicles with DCC / Magnetic ride suspension Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Volkswagen Golf Mk7 2012-present

Read more less

Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only) Part number: VWR29G7250 It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it. Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection. The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. What’s included in the kit Oil cooler mounting brackets AN10 210 series Nylon braided feed and return line Billet CNC thermostatic adaptor block Replacement, low-profile oil/water cooler AN10 10-row oil/air cooler core Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar.   Why fit a DSG Cooler Kit? Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation. Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues. Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection. The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

Read more less

Racingline Performance ‘R360’ 19″ Alloy Wheels The R360 takes all the attributes of our race wheels of strength, lightness and the peace of mind of UK manufacture – then adds in a large helping of style. Two luxurious finishes://  Gunmetal Grey//  Star Silver At 10.5kg, 23.15lb, each R360 weighs up to 2kg less than the OEM wheels. Produced to the highest specification in the UK to meet (and exceed) OEM standards and the reassurance of full TÜV international approval. Combining lightness, strength and a stunning OEM+ inspired 10 spoke design finished in a gloss gunmetal finish. Technical This 19″x 8.5″ rim has an offset of ET44. That’s perfect for all Golf 7 and other MQB-platform cars, together with the A5-platform cars (such as Golf 5/6 ) and other 5x112pcd VWG vehicles.  It looks simply perfect on these models, filling the arches to perfection. We recommend a tyre size of 235/35 R19 for these wheels to maintain wheel arch clearance.  Note that for Golf 5/6 applications, where arch clearance is tight we would recommend a 225/35 R19 tyre. Notes:* 8.5J x 19″* 5 x 112 PCD* ET44 Offset* Sold as a Set of 4x Alloy wheels* Also available individually – contact usfor details* Tyres not included but available as an extra – contact us for details Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8P) 2003-2013 Audi A3 (8V) 2012-present Audi S3 (8P) 2003-2013 Audi S3 (8V) 2012-present Audi TT (8J) 2006-2014 Audi TT (8S) 2014-present Audi TT RS (8J) 2006-2014 Audi TTS (8J) 2006-2014 Audi TTS (8S) 2014-present Seat Leon (2nd gen) 2005-2012 Seat Leon (3rd gen) 2013-present Skoda Octavia (2nd gen) 2004-2013 Skoda Octavia (3rd gen) 2013-present Skoda Superb (3rd gen) 2015-present Volkswagen Golf Mk5 2003-2008 Volkswagen Golf Mk6 2008-2012 Volkswagen Golf Mk7 2012-present Volkswagen Passat VI (B8) 2014-present Volkswagen Scirocco III 2008-present

Read more less

Racingline MQB VW Golf ‘R’/GTI & Cupra Oil Cooler Racingline’s Oil Cooler kit is a complete ready to install package.  An essential for any hard-driven Golf Mk7 GTI or ‘R’ running high power levels, hot climates or on the track. Of course, adding power generates more heat to disperse. Significantly increased oil temperatures mean only one thing: a decrease in the ability for your engine to stay properly lubricated.The new Racingline kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in front of the car, oil temperatures are reduced by around 15-20ºc (of course this varies dependent on factors such as how the car is being driven, ambient temperatures and state of tune). Unlike many oil cooler kits, this keeps the factory Oil to Water cooler in position – effectively doubling up on your cooling. As oil passes through the new cooler first, that means less heat transfer back into your car’s water coolant circuit too. What’s in the kit? – Oil Cooler mounting brackets– AN10 ‘210 Series’ Nylon braided feed and return lines– Billet CNC oil cooler sandwich plate– AN10 ’10-Row’ Oil Cooler Core– Billet oil filter housing with removable drop in filter– Fitting kit consisting of all necessary nuts, bolts, washers and rubber mountings Notes: – Pre-2016 Cars will require a 2016+ Oil Filter Stem (06L115678Q)   Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Audi TTS (8S) 2014-present Seat Leon (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Racingline Performance Sport Spring Set Lowering Range: * 20mm Front and Rear Racingline Performance Sport Springs are engineered to replace the standard springs with a shorter and stiffer spring, while lowering the centre of gravity they will also help to reduce body roll for better handing over the standard springs and while offering fantastic ride quality and comfort, which can be improved from the standard ride on some applications. These springs have been designed to work in harmony with the standard dampers so no other changes are needed. Racingline Performance Sport Springs are for customers who demand performance over the stock setup without costing thousands! The spring range offered by Racingline Performance are not designed to drastically lower the vehicle, however for those of you who do want this you can look at the Racingline Performance range of coilover kits. Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Volkswagen Golf Mk7 2012-present

Read more less