Performance - Nissan 350Z

RTS Performance Brake Discs – Front Fitment (RTSBD-0180R)   RTS Performance has developed a comprehensive range of Brake Discs and Pads for all vehicles.  RTS Performance Brake Discs are a direct OE replacement that dissipates heat and allows gases to escape much more efficiently than your factory brake discs. This provides the driver with more positive feedback in Braking Performance. Moreover, Our design prevents the forming of service cracks and can, therefore, withstand harder driving and higher temperatures.  All Performance Braking is manufactured in the United Kingdom and undergo rigorous testing to meet G3500 and ECR90 quality accreditation. Read more about our Performance Brake Discs. Suitable for the following Cars Nissan 350Z

Read more less

System with Polished Tips Part No. Description Tailpipe Pipe Diameter Race EC MSNI101 Y-Piece 3.00" (76.20mm) MSNI102 Centre Section MSNI103 Rear Silencer Dual 100mm Meteor Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

** Catalogue Images may differ from delivered product ** All new PERFCO premium wheel spacer Fits: Almera (V10) ('00-'06) - Primera (P12) - Silvia 200 SX (S14/S15) - 350Z (Z33) -                                                                                         Skyline (R32/R33/R34) - 300 ZX (Z31/Z32) - 370Z (Z34) - GT-R (R35) -                                                                                                      Pulsar ('14+) (CHECK) - Máxima - Vanette/Serena Literally putting our name on the line, we had to ensure we offer a premium product. Our Perfco Performance spacer kits are manufactured in Italy, machined from billet aluminium and feature a black anodised finish. European manufacture not only helps us to ensure European quality, but it also allows better supplier communication and lead times on specialist orders, which in turn allows us to offer improved service to you. Kits come complete with extended wheel bolts / wheel nuts (where required). We are also able to supply extended locking wheel nuts to simplify the buying process for you. Perfco Performance premium wheel spacer kits cater all popular applications from Audi to Volkswagen

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Nissan 350Z performance exhaust is made in 2.5"/63.5mm & 3"/76.2mmbore pipework and fits from the catalyst sections to the centre section.This exhaust will still enable you to pass a UK MOT emissions test or police road side checks.All relevant fittings and gaskets are supplied.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Nissan 350Z performance exhausts are made in 2.5"/63.5mm bore pipework and fit from the manifolds to the y-section. The sports cat exhaust optionåÊwill enable you to pass a UK MOT emissions test or police road side checks. The de-cat sports exhaust option is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks.åÊ All relevant fittings and gaskets are supplied.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Nissan 350Z performance exhausts are made in 2.5"/63.5mm bore pipework and fit from the manifolds to the y-section. The sports cat exhaust option will enable you to pass a UK MOT emissions test or police road side checks. The de-cat sports exhaust option is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks.åÊ All relevant fittings and gaskets are supplied.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Nissan 350Z performance exhausts are made in 3"/76.2mm pipework and fit from the Y-section backwards these exhausts replace the centre and rear sections. The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note.åÊ All relevant fittings and gaskets are supplied. Press Release Independent testing of the Cobra Sport cat back exhaust system with High Flow sports catalyst revealed exciting power gains when tested on the rolling road (check out the video below and power graph in the product images). With the fully Cobra Sport exhaust system fitted with additional sports cat, testing showed a +8.2bhp increase in power taking the 350Z to 274.6bhp along with a +12.8lb-ft increase in torque recording a healthy 346.7lb-ft of torque. Media Example of Nissan 350Z sports exhaust (cat-back-Non-Resonated). Example of Nissan 350Z sports exhaust (cat-back-Non-Resonated). Example of Nissan 350Z sports exhaust (cat back - resonated & Y-section). Example of Nissan 350Z sports exhaust (cat-back - resonated). Example of Nissan 350Z sports exhaust (cat back - resonated & Y-section). Example of Nissan 350Z sports exhaust (cat back - non-resonated) Example of Nissan 350Z sports exhaust (cat back - resonated) Example of Nissan 350Z sports exhaust (cat back - resonated) Interior sound example of Nissan 350Z sports exhaust (cat back - non-resonated) - on track at Oulton Park Comparison between Cobra Sport exhaust (cat back - non-resonated) and standard exhaust system Power testing the Nissan 350Z sports exhaust (cat back - resonated & high flow sports catalysts). Example of Nissan 350Z sports exhaust (cat back - resonated & Y-section). Example of Nissan 350Z sports exhaust (cat back - resonated & Y-section). Power Testing the Nissan 350Z sports exhaust (cat back - resonated, Y-section & de-cats) resulting in 300bhp and 325Nm Example of Nissan 350Z sports exhaust (cat back - resonated, Y-section & de-cats). Example of Nissan 350Z sports exhaust (cat back - non-resonated) Example of Nissan 350Z sports exhaust (cat back - non-resonated) Example of Nissan 350Z sports exhaust (cat back - non-resonated)

Read more less

This actuator is designed for the Nissan S14 (the version that has a straight actuator rod) Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACS14S Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A Single replacement piston actuator for the Nissan 350Z which can be adjusted to suit the operational requirements by changing the internal springs. This actuator is a suitable replacement for any APS single aftermarket turbo setup that utilizes an actuator with a removeable bracket and turnbuckle and a 1" straight rod. For twin turbo APS applications please see FMPAC350Z below. This product is built with a predetermined actuator spring suitable for at, or slightly above APS boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. After requests for a very durable, fit and forget version of our actuators that would withstand the rigors of marine corrosion or simply would not tarnish, we have now added the option of ordering any of our piston design actuators with stainless steel bodies and external components/fixings. This option does incur a surcharge and will be shown when added to your basket. Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Please contact us by email if you require more information   In The Box:1 x FMPAC350ZS Actuator1 x Forge Sticker This actuator is built with a Green coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Scorpion Exhausts Nissan 350Z Y-Piece replacement section Fits Years 2003 to 2010 Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 Embrace the Nissan tagline “Innovation that Excites” with an innovative performance Scorpion exhaust. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SNSP015 Product Type Y-Piece Fitment Years 2003 - 2010 Fits To OEM / Scorpion Model Fitment Z33 Fits Imports Pipe Diameter 63.5mm/2.5" * Shipping Dimensions 73cm x 32cm x 32cm

Read more less

Scorpion Exhausts Nissan 350Z Half system (Y-piece back) Fits Years 2003 to 2010 Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 Embrace the Nissan tagline “Innovation that Excites” with an innovative performance Scorpion exhaust. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle Technical information for SNS015R Product Type Cat-Back Resonated Non-resonated Fitment Years 2003 - 2010 Fits To OEM / Scorpion Model Fitment Z33 Fits Imports Pipe Diameter 63.5mm/2.5" * Tailpipe Indy Tailpipe Diameter 114mm Shipping Dimensions 84cm x 62cm x 37cm Notes Fits UK and Import cars.

Read more less

Scorpion Exhausts Nissan 350Z Half system (Y-piece back) Fits Years 2003 to 2010 Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 Embrace the Nissan tagline “Innovation that Excites” with an innovative performance Scorpion exhaust. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SNS015 Product Type Cat-Back Resonated Non-resonated Fitment Years 2003 - 2010 Fits To OEM / Scorpion Model Fitment Z33 Fits Imports Pipe Diameter 63.5mm/2.5" * Tailpipe Daytona Tailpipe Diameter 114mm Shipping Dimensions 84cm x 62cm x 37cm Notes Fits UK and Import cars.

Read more less