performance-st180

Maxton Design SPOILER EXTENSION FORD FIESTA MK7 FACELIFT ST / ZETEC S Fits:  FORD FIESTA MK7 FACELIFT ST / ZETEC S version 2013 - Product code: FO-FI-7-ST-CAP1. COMPLETE SET CONTAINS: -SPOILER EXTENSION WITH 3M TAPE -DEGREASING CLOTH   Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please allow 7-10 day delay. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

COMPLETE SET CONTAINS: FRONT BUMPER SPOILER Product is made of ABS plastic. FITS: Ford Fiesta mk7 Facelift 2013 - ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Spoiler CAP Ford Fiesta ST Mk7 FL FITS ONLY:Ford Fiesta ST Mk7 Facelift (2013-2016) COMPLETE SET CONTAINS:-> Spoiler Extension + 3M Tape-> Degreasing Cloth-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified. Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

fits only: FORD FIESTA MK7 ST FACELIFT (2013-2017) COMPLETE SET CONTAINS:  RACING SIDE SKIRT DIFFUSERS Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

REAR BUMPER FORD FIESTA fits : Ford Fiesta mk7 standard version 2013 -   COMPLETE SET CONTAINS: - REAR BUMPER   Please Note: By selecting “Add to cart” you are agreeing to the below statement! All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!  Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.  Product is made of Fiberglass. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

REAR BUMPER FORD FIESTA Description Product is made of Fiberglass. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: By selecting “Add to cart” you are agreeing to the below statement!   All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!  Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.    Fits Ford Fiesta mk7 standard version 2008 - 2013 COMPLETE SET CONTAINS: Bumper primed DELIVERY INFORMATION Please read carefully! Postage Costs are calculated by Maxton Design. We release all orders from Monday to Saturday We send goods in perfect condition All goods are insured for damages in transport Please check the package for any potential damages before you sign for it All eventual damages should be claimed to the courier (courier should note all damages on your copy of delivery receipt and you should make insurance claim for all damages caused in transport).Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Rear Diffuser Ford Fiesta ST (3 Door Version) Mk7 FITS ONLY:Ford Fiesta ST (3 Door Version) Mk7 (2013-2017) ** Our product is assembled as a replacement for the OEM rear valance ** COMPLETE SET CONTAINS: Rear Diffuser This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. Our full fitting manual can be found here: REAR DIFFUSER WITH CLIPS INSTALLATION MANUAL CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

fits only: FORD FIESTA MK7 ST FACELIFT (2013-2017) ** This product is an add on and is not a replacement for original diffuser ** COMPLETE SET CONTAINS:  REAR DIFFUSER Mounting kit Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIAL GUTACHTEN certified (TUV certify for material).  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

DESCRIPTION REAR SIDE DIFFUSERS FORD FIESTA MK7.5 ST fits only: Ford Fiest MK7.5 ST (2013-2017)  COMPLETE SET CONTAINS:-> Rear Side Diffusers(Left+Right) Product is made of Fiberglass.All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.We can only accept a return within 14 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

REAR SIDE SPLITTERS FORD FIESTA MK7 FACELIFT fits : Ford Fiesta mk7 ST 2013 - 2017   COMPLETE SET CONTAINS:  -REAR SIDE SPLITTERS (L & R SIDE)   Product is made of ABS plastic.ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   DELIVERY INFORMATIONPlease read carefully!All splitters are shipped direct from Maxton Design following the below guidelines, with shipping costs being set by Maxton:We release all orders from Monday to Saturday We send goods in perfect condition All goods are insured for damages in transport Please check the package for any potential damages before you sign receipt All eventual damages should be claimed to the courier (courier should note all damages on your copy of delivery receipt and you should make insurance claim for all damages caused in transport)   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Rear Side Splitters Ford Fiesta Mk7 ST / ST-Line FITS ONLY:Fiesta Mk7 ST (2008-2013)Fiesta Mk7 ST-Line (2008-2013) COMPLETE SET CONTAINS:-> Rear Side Splitters (Left & right)-> Fitting manual / Fitting kit Fitting manuals: REAR SIDE SPLITTERS INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

fits : Ford Fiesta MK7 version 2008 -    Please Note: By selecting “Add to cart” you are agreeing to the below statement!   All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!    Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.      COMPLETE SET CONTAINS: -ROOF SPOILER EXTENSION (PRIMED)   Product is made of Fibreglass.   Parts need to be prepared and trial fitted before painting! By purchasing these parts you accept that some alterations will need to be made to ensure a perfect fit.   All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fibreglass characterise with increased strength and flexibility. Part is primed in grey or black matte. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   DELIVERY INFORMATION  Please read carefully! We realise all orders from Monday to Saturday We send goods in perfect condition All goods are insured for damages in transport Please check the package for any potential damages before you sign receipt All eventual damages should be claimed to the courier (courier should note all damages on your copy of delivery receipt and you should make insurance claim for all damages caused in transport)   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less