Performance - Toyota GT4

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

CEUK ChromoLite Indicator Upgrade Tired of the orange look of your current indicator bulbs? Want something different? Well here you go! Our indicator bulbs are a mirror reflective silver colour, But still glow Bright Orange. Not only are they brighter than standard, but they enhance the look of your car dramatically by taking away the horrible orange of factory bulbs! These bulbs are the offset pin type, please check they are correct for your car before ordering. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description We introduce to you the IllumiNite D2S Bi Xenon replacement bulb upgrade!  A simple replacement unit, completely plug and play providing phenomenal results. Suitable for any D2S application including self leveling headlights. Upto 50% Brighter than OEM / Standard Headlights providing a safer driving experience at night but without causing glare to other drivers. Suitable for Projectors - Will not burn lenses! Technical Specs Colour: 6000K White Power: 12v / 35w Fitment: D2S Xenon / HID Pack Contents 2x D2S Bulbs Guarantee Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. 14 day Money back guarantee if unsatisfied Subject to product being returned at Buyers cost in a re salable condition!

Read more less

Description: When traveling Abroad, or even in the UK its always best to have a tyre inflator in your vehicle! 12v with fused cigerette lighter plug - up to 300psi. Complete with adapter kit for football and bicycle. 3mtr Cable - Enough to use even on large vehicles.

Read more less

Description: The Slime Smart Spair is "THE SMART WAY TO FIX FLATS FAST". No need to jack-up the car or remove the wheel - just install Slime tyre sealant, plug in the air compressor, turn it on, reinflate and go. Stow it under your car seat or in the boot - The Smart Spair offers a portable solution for flat tire repair. No need to remove the tyre. No need to wait for recovery assistance. Avoid dangerous roadside delays. Fix a flat fast - in 15 minutes or less! Emergency repair kit fixes a in 15 minutes No need to remove the tire 300psi 12v Tyre inflator with adapters included Includes a bottle of Slime tire sealant and a portable air compressor Seals punctures up to a quarter-inch Repairs punctures up to 6mm in tubeless tyres Comes with adapters to inflate mattresses, balls or other inflatables

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

This actuator is designed for the Toyota GT4 Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACGT4 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 3, 048 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less