LEYO

Leyo Motorsport’s CAI for the A4 B9 is a must have for those seeking to upgrade their car. By removing some factory air flow restrictions together with a massive 4 inch conical filter, this intake guarantees more horse power at an affordable cost. High grade aluminum heat shield effectively blocks out excess heat from the engine bay while is also significantly lighter than the steel heat shields found on the market. A secondary heat shield is incorporated into the design to block excessive heat from the exhaust manifold. Installation is easy and straight forward, no fabrication required. Please note that if your car has air flow sensor on the inlet pipe, this intake does not fit.

Read more less

21st century look with the Leyo Motorsport MK5 GTI MK6 R Cold Air Intake System. Fabricated from high grade aluminum (very important, as many on the market use steel) this intake kit is lighter (again, vs steel) and less prong to heat soak (again… steel). This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

More air, more power. Leyo Motorsport designed this intake for the 2.0l petrol engine F56 Mini Cooper S and JCW with maximum air flow in mind. Higher flow filter now replaces the restricted OEM filter and high grade aluminum heat shield effectively blocks out excess heat from the engine bay while is also significantly lighter than the steel heat shields found on the market. Installation is simple and straight forward with no modification needed. Other than the 2.0l petrol F56, it can also be installed in F54, F55 and F57 generation of the Mini family that has the same 2.0l petrol engine. Please make sure to check the design of the MAF sensor found on your car as there is a pre 2018 and 2018+ version, this intake fits the pre 2018 version.

Read more less

LEYO Cold Air Intake System for the Audi 8V RS3 guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain. LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminium 4 inch diameter tubing  ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion.LEYO R&D team also optioned for quality proven LEYO double cone filter element for uncompromising filtration, performance and ease of maintenance. Specially designed air box prevents heat soak, effectively extracting colder induction air.For those that want the open airbox design, Leyo RS3 intake airbox can be both enclosed or open.No fabrication required for installation, bolts straight onto factory mounting points.  Notes:- This intake does not fit the 2017+ aluminium block 8V RS3

Read more less

Volkswagen Polo Mk6 (AW) GTI LEYO Intake Kit LEYO Cold Air Intake System for the MK6 Polo GTI guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain. LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 2.5’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. Factory MAF sensor part is used to prevent anomaly in MAF sensor reading.  LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenance. Specially designed airbox prevents heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points. *Note: Only for petrol EA888.3b MQB cars, not for diesel cars. Only for vehicles with air flow sensor on factory intake Specifications OEM fitment requires no fabrication 2.5’inch diameter for greater air induction Unique quality and design Track and dyno proven for greater horsepower gain Heat shield included Direct bolt on & easy installation Easy installation Intake Heat shield Installation Instructions  

Read more less

LEYO Cold Air Intake System for the Audi 8V RS3 guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.  Leyo Motortsport proudly presents their all new Cold Air Intake for the facelifted Audi RS3 with the all new 400HP aluminum block.  This intake builds on the airbox design of their pre-facelift RS3 intake while integrating factory dampening design on the intake pipe.  The intake pipe with the wide 89mm filter flange tapering to 76mm creating a velocity stack design efficiently feeds cold air into the turbo. Specially designed air box prevents heat soak, effectively extracting colder induction air. For those that wants the open airbox design, Leyo RS3 intake airbox can be both enclosed or open.  No fabrication required for installation, bolts straight onto factory mounting points. Notes:- This intake does not fit the Pre-Facelift 8V RS3 (-2017)- This intake does not fit GPF equipped 8V RS3 Facelift (2019+)- Suitable for DAZA Engine Facelift RS3 8V (2017-2019)

Read more less

In the world of VW, the R32 with the iconic VR6 engine has achieved cult-like status. Leyo Motorsport has over the years gained enough experience to now touch an icon.  ​ Air flowing through the OE air scoop is greeted by an enlarged high flow air filter and quickly fed into the engine, assisting power gains across the rev range especially in the higher rpm’s whether you on stock or tuned ECU.  Excessive heat from the engine bay is blocked by the heat shield. ​ LEYO Cold Air Intake System guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain. LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain.  ​ Installation is simple and straight forward, no fabrication required

Read more less

LEYO Cold Air Intake System guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain. LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain.Made with high grade full aluminium 3’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion.LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromising filtration, performance and ease of maintenance.Specially designed heat shield is also included to prevent heat soak, effectively extracting colder induction air. No fabrication required for installation, bolts straight onto factory mounting points.  OEM fitment requires no fabrication 3’inch diameter for greater air induction Unique quality and design Track and dyno proven for greater horsepower gain Heat shield included Direct bolt on & easy installation Easy installation Intake Heat shield

Read more less

Leyo Motorsport Cold Air Intake Kit - MQB EA211 1.4TSI Still wondering why your factory airbox is sitting on top of the engine?  That’s because you haven’t switched to Leyo intake that’s why!Cold air from the outside is now directed straight onto the filter instead of being routed to the engine top mounted airbox.  Position of the filter is as far away as possible from the engine and high quality aluminum heat shield blocks unwanted heat to ensure the needed cold air is provided to the engine.With the ugly gap on the side filled and top of the engine freed up, engine bay looks much more attractive and clean. OEM fitment requires no fabrication. Unique quality and design. Track and dyno proven for greater   horsepower gain. Direct bolt on & easy installation.

Read more less

Replace your restrictive factory airbox with this new airbox from Leyo Motorsport.  Meticulously engineered, this final design is the culmination of numerous air flow rendering and analysis.  High flow air filter ensures maximum air flow eliminating the air flow restrictions found in the stock airbox.  More air means more usable power especially when paired with Leyo charge pipe for the MK7 1.4.   Installation is simple and straightforward, in just minutes your engine bay will be transformed with the addition of this Leyo intake kit.   Track and dyno proven for greater   horsepower gain Maximum airflow. Unique quality and design. Simple installation

Read more less

Proudly presenting the new Leyo Motorsport Cold Air Intake for the Volkswagen AG’s MQB platform.This MQB Cold Air Intake System for the 2.0T engine guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.Made with high grade full aluminum 3’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. LEYO R&D team also optioned for quality proven LEYO pod filter element for uncompromised filtration, performance and ease of maintenanceThis newly designed intake can be used as both a closed or an open intake kit.  Specially designed heat shield prevents heat soak, effectively extracting colder induction air.Installation is simple and straight forward, no fabrication required

Read more less

LEYO Cold Air Intake System for the Amarok V6 3.0 TDI guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain. Factory plastic pipe is known to go hard and crack, allowing dust into the turbo. This intake comes with aluminum pipe and heatshield offering better durability and visual appeal. LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminum 3.5 ’inch diameter ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion. *This product is only for use on the race track.

Read more less