Airtec

Finally an off the shelf way to fit a Race Tow Strap to your Fiesta MK7, no bumper removal and then never using it because your to scared it may crack your bumper due to being bolted in a incorrect towing position  In Fords wisdom they made the original towing eye thread custom, this meant we have to make a tool just to cut the thread on the adapter, then we added a flat section so you can tighten it with a 19mm spanner Complete kit, Genuine THS Tow strap, adapter boss and Tow strap fixing bolt £34.95 Easy fit zinc plated Tow strap machined adapter thread 'M10 Thread' £24.95 Thread avalable on it's own, or with the optional tow strap.

Read more less

The new design Stage 2 induction kit that works perfectly with the standard 1.0L 100ps, 125ps & new 140ps Fiesta EcoBoost. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off.  Features. Removes ugly original plastic & restrictive airbox Adds power and torque  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter  CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Cold feed pipe, secure to bottom of -shield and secures to lower boost hose, or attach to front lower bumper as shown in the photo Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) A simple modifcation that transforms the look of your engine bay. Choose from Red filter or Black Foam Filter AS good AS it gets. Comes with 24 month warranty 'conditions apply' Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering! 

Read more less

The new design Stage 2 induction kit that works perfectly with the standard Fiesta ST180. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off.  Features. Removes ugly original plastic & restrictive airbox Adds power and torque,  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield Adds style to your ST engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) Choose from Red filter or Black Foam Filter Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering! 

Read more less

Reduce your stock shift throws with two different positions, ranging from 15% or 25%. Offering 2-positions truly allows the user more options to fine tune their shift throws! With a quick and easy installation process the stock shift weight does not need to be removed. This saves time and makes the installation quick and easy. Made from CNC machined aluminium with engraved AIRTEC Motorsport logo All hardware is 100% stainless steel including the ball stud. 2-position adjustable between (15% or 25%) reduction Completely reversible Installs in approx. 15 minutes Simple DIY fitting: Remove gear selector cable from original shifter, using long nose pliers or mole grips. Install top section of new short shifter which will locate it’s self due to cut out underneath top section. Then install lower section and new bolts and tighten, simply reconnect gear selector cable. 15% (Lower hole) or 25% (Top hole).

Read more less

The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.0 Fiesta Mk8 ST-Line.Expect to see gains of 5-10bhp compared to the original Airbox.Please note: This kit is designed to fit the pre 2020 model that has the turbo at the front. for the 2020-onwards 1.0 EcoBoost model with the turbo at the rear please see:  INDUCTION KIT FOR FIESTA MK8 1.0 & ST-LINE (REAR TURBO 2020 ONWARDS) Enhanced induction sound, great looks and loud recirculation dump valve noise on let off.Features: Removes ugly original plastic & restrictive airboxAdds power and torquemore responsive and exciting driving experienceEnhanced induction sound and turbo recirculation noise (dump valve ‘psssh’)free flowing Airfilter & optional k&n dry charger filter coverCNC maf sensor bossPowder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filterCold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photoAdds style to your engine bayEasy fitting, takes less than 15-20 minutes to install It’s easy to fit, looks great, sounds even better, doesn’t cost the earth and can be put back to standard within 10 minutes (warranty)A simple modification that transforms the look of your engine bay. Please note: Bolt needs cutting if fitting optional silicone hose. Registered Design Right number 6023921 AIRTEC part no: ATIKFO17

Read more less

The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.5 ST 200 Mk8 Fiesta. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Add a pro Silicone Hose - Price includes hose clamps Features: Removes ugly original plastic & restrictive airbox Adds power and torque  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Cold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photo Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) A simple modifcation that transforms the look of your engine bay.   Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering!   

Read more less

Help your 1.0 EcoBoost get a much Air into the engine as possible! Please note: fits FIESTA ONLY - Focus you will need a different design, please inform our support team or add a note to order advising this is for a FOCUS so we can send the revised bracket! Transform your 1.0 EcoBoost engine bay, larger diameter pipe-work combined with AIRTEC induction kit means louder waste-gate chatter, similar to Focus RS Mk2  Features Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Increased induction noise AIRTEC induction kit recommended Fits all Fiesta Mk7/7.5 1.0 Eco Boost 100 ps and 125ps, 140ps models 

Read more less

The new design Stage 2 induction kit that works perfectly with the standard Focus ST 250. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off and only £295.00 Features. Removes ugly original plastic & restrictive airbox Adds power and torque,  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Adds style to your engine bay Easy fitting Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard quickly (warranty)

Read more less

This is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. This part will fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150   The Yellow bush insert is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement.   The Purple Bush insert is aimed @ track and race, not recommended for everyday use as the bush is close to solid and will increase cabin noise (not that bad actually) but massivley reduces engine movement for faster gear changes   New Black Series Bush insert Ultimate performance motorsport track and race bushes offering the most precise and accurate driving experience. This bush is nearly 100% solid and is only aimed at the most hard-core track day or serious hard fast road use.   Features 2 x Polyurethane bush inserts CNC from solid billet alloy, bead blasted and anodised in satin Black Reduces engine movement and wheel hop on hard acceleration A must for modified cars Replaces original ford cast alloy and rubber torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required   This is why we choose Power Flex The company operates in a self-contained state of the art factory, manufacturing everything in-house. The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality. The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs.Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

AIRTEC Motorsport boost guage kit for Fiesta ST 180. The AIRTEC Motorsport Fiesta MK7 boost guage kit, supplied with Turbosmart Boost Guage in PSI or BAR. Simple and classy OE look with no messy wiring. Comes complete with fitting guide for a quick & simple DIY install. Kit includes: Turbosmart backlit boost gauge (Bar or PSI) Gauge securing ring Vaccum hose Bracket and bolts CNC vaccum take off (Fits onto inlet manifold

Read more less

AIRTEC has now taken the intercooler on the ST180 to a whole new level, with the step core design offering a 85mm thick lower section and a 40mm thick upper section ‘The Double Decker’ The intercooler has been designed for cars running hybrid turbo’s and big turbo conversions where fitted, however still produces fantastic gains on Stage 2 cars If the ECU see’s over 50 degree’s it will back power off for engine safety, the AIRTEC intercooler keeps the temps low enough so you keep all your power. DimensionsOEM IntercoolerWidth: 690mm Height: 130mm Depth: 50mm Capacity: 4.5 litres Front area: 900cm² AIRTEC Motorsport IntercoolerWidth: 615mm Height: 350mm Depth: 85mm to 40m stepped core Capacity: 12.1 litres Front area: 2,150cm²   Will fit Fiesta ST 200 Registered Design Right number: 6023251 Now only available in Pro-Series Black Please note: Due to different crash bar, this will not fit US spec models. 

Read more less

The new design Stage 3 induction kit that works perfectly with the standard Fiesta ST180. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Replaces bigger silicone hoses with hard pipes Adds more power and torque,  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield Adds style to your ST engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) AS good AS it gets. Comes with 24 month warranty 'conditions apply' Will fit Fiesta ST 200 Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering! 

Read more less