All

Replaces very restrictive original twin intercooler setup with lengthy pipework, with an AIRTEC design high flow 60mm core intercooler and a shorter alloy boost pipe kit. We keep fast turbo spool up by using 50mm pipework from turbo to intercooler and 60mm out of the intercooler to help match the throttle body, this combination gives fast turbo spool up coupled with maximum power output. Dyno test results – results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC Run 1.  120 degree into the intercooler and 22 degree out of the intercooler Run 2.  122 degree into the intercooler and 22 degree out of the intercooler Run 3.  123 degree into the intercooler and 22 degree out of the intercooler The AIRTEC intercooler dropped the intake temperatures by 100 degree on each run and did not suffer from heat soak Features:     60mm thick proven bar and plate core, spec’d to AIRTEC design     AIRTEC branded cast end tanks for improved air flow and unbeatable strength     Dyno proven to provide lower intake temps and gain BHP     Shorter charge pipes than standard twin intercooler set-up, shorter pipes mean faster turbo spool up     Fitting takes approximately 2-3 hours     3 year unlimited mileage warranty     Available in Pro-Series Black     AIRTEC Logo available at no extra charge     Unbeatable value for money   Will fit Abarth 500 / 595 models fitted with the IHI turbo – 135, 140, 145 & 160 bhp models Approximate dimensions: Height – 205mm Width – 820mm Depth – 65mm   Registered Design Right number 6023445

Read more less

Replaces very restrictive original twin intercooler setup with lengthy pipework, with an AIRTEC design high flow 60mm core intercooler and a shorter alloy boost pipe kit. We keep fast turbo spool up by using 50mm pipework from turbo to intercooler and 60mm out of the intercooler to help match the throttle body, this combination gives fast turbo spool up coupled with maximum power output. Dyno test results – results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC Run 1.  120 degree into the intercooler and 22 degree out of the intercooler Run 2.  122 degree into the intercooler and 22 degree out of the intercooler Run 3.  123 degree into the intercooler and 22 degree out of the intercooler The AIRTEC intercooler dropped the intake temperatures by 100 degree on each run and did not suffer from heat soak Features:     60mm thick proven bar and plate core, spec’d to AIRTEC design     AIRTEC branded cast end tanks for improved air flow and unbeatable strength     Dyno proven to provide lower intake temps and gain BHP     Shorter charge pipes than standard twin intercooler set-up, shorter pipes mean faster turbo spool up     Fitting takes approximately 2-3 hours     3 year unlimited mileage warranty     Available in Pro-Series Black     AIRTEC Logo available at no extra charge     Unbeatable value for money   Will fit Abarth 500 / 595 models fitted with the IHI turbo – 135, 140, 145 & 160 bhp models Approximate dimensions: Height – 205mm Width – 820mm Depth – 65mm   Registered Design Right number 6023445 This intercooler will fit with the automatic paddle shift gearbox on the Fiat 500 Abarth

Read more less

Replaces very restrictive original twin intercooler setup with lengthy pipework, with an AIRTEC design high flow 60mm core intercooler and a shorter alloy boost pipe kit. We keep fast turbo spool up by using 50mm pipework from turbo to intercooler and 60mm out of the intercooler to help match the throttle body, this combination gives fast turbo spool up coupled with maximum power output. Dyno test results – results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC Run 1.  120 degree into the intercooler and 22 degree out of the intercooler Run 2.  122 degree into the intercooler and 22 degree out of the intercooler Run 3.  123 degree into the intercooler and 22 degree out of the intercooler The AIRTEC intercooler dropped the intake tempertures by 100 degree on each run and did not suffer from heat soak Features:     60mm thick proven bar and plate core, spec’d to AIRTEC design     AIRTEC branded cast end tanks for improved air flow and unbeatable stength     Dyno proven to provide lower intake temps and gain BHP     Shorter charge pipes than standard twin intercooler set-up, shorter pipes mean faster turbo spool up     Fitting takes approximately 2-3 hours     3 year unlimited mileage warranty     Available in Pro-Series Black     AIRTEC Logo available at no extra charge     Unbeatable value for money Will fit any Abarth with Garrett GTI446 Turbo – 165, 180 & 190 bhp models with the automatice paddle shift gearbox Will fit the following: Series 3 180 Competizione (Mid-Late 2015)Series 4 TurismoSeries 4 Competizione Approximate dimensions: Height – 205mm Width – 820mm Depth – 65mm Registered Design Right number 6023445

Read more less

AIRTEC huge front mount intercooler for Mk3 Focus RS.   The AIRTEC intercooler is the only off the shelf intercooler that uses a 100mm deep core! We use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties. Features of Stage 3.   Smooth flow curved end tanks, for that ultimate flow Huge high flow 100mm core Air-Ram Scoop, forces Air directly into core of intercooler Fitting takes 1-2 hours Increased BHP & torque Figure Available in Pro-Series Black or Natural Silver Strongest Intercooler available, backed up by our 3 year warranty. Fabricated in the UK, in house. Core Thickness 100mm 'this is used on a syvecs powered 800bhp focus rs with an intake temp of 34 degrees' Height 220mm Width 896mm   The 2.5" big boost pipe kit is a must for a remapped RS, everything you need is included in the kit. Features: Hot side (turbo to intercooler) is made from 2.5" light-weight alloy and connected with Pro Hoses 5 ply silicone hose joiners. Available in Pro-Series Black or Motorsport Silver pipework Will fit With the following intercoolers: AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5" hard pipe upgrade removes Ford's 2.0" restrictive boost pipes and can see 'bolt on power'.  This kit is designed for BIG BHP / Remapped Focus RS's. All pipes have swaged ends to stop the pipes blowing off on higher power cars. AIRTEC Part no: ATINTFO44/INTBBP   Nitrous blue can be customer ordered with a 3-4 week turnaround

Read more less

PLEASE NOTE: This is for the intercooler only - without hoses PLEASE NOTE: this intercooler is only available in Pro-Series Black AIRTEC huge front mount intercooler for Mk3 Focus RS. The AIRTEC intercooler is the only off the shelf intercooler that uses a 100mm deep core! We use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties. The AIRTEC intercooler for the MK3 Focus RS is already proving itself to be a huge hit in the RS scene and the must have for remapped cars. With the standard intercooler being pretty up to scratch, Airtec have taken this intercooler to a whole new level. Features of Stage 3. Smooth flow curved end tanks, for that ultimate flow Huge high flow 100mm core Air-Ram Scoop, forces Air directly into core of intercooler Fitting takes 1-2 hours Increased BHP & torque Figure Available in Pro-Series Black or Natural Silver Strongest Intercooler available, backed up by our 3 year warranty. Fabricated in the UK, in house.   Core Thickness 100mm 'this is used on a syvecs powered 800bhp focus rs with an intake temp of 34 degrees'   Height 220mm   Width 896mm   Ambient 16.0 degrees centigrade   Test results Into intercooler in degrees centigrade Run 1 - 155 Run 2 - 157 Run 3 - 160   Out of intercooler in degrees centigrade Run 1 - 18  Run 2 - 18 Run 3 - 19 Intercooler Volume Capacity (The amount of charged air that the intercooler can hold) Standard: 4.4AIRTEC: 7.3-litres

Read more less

TECHNICAL DATA AIRTEC has now added a great addition to it’s growing range of performance intercoolers, in the way of this smart front mount intercooler for the Mini R53 Great addition to any Mini R53 Features 50mm thick track proven bar and plate core, spec’d to AIRTEC design AIRTEC Cast end tanks for improved Airflow and unbeatable strength Comes with silicone and alloy boost pipe connecting hoses – includes stainless clips Fitting takes 3-4 hours 3 year unlimited mileage warranty Only available in Pro-Series Black AIRTEC Logo available for no extra charge Huge surface area whilst still allowing plenty of airflow to top section of the radiator, essential for hotter climate countries. Please note: This kit is a custom install and will require the air-con to be removed & some minor cutting under the bonnet. This intercooler is only available in Pro-Series Black. WILL NOT FIT WITH AIRTEC OIL COOLER KIT Approximate dimensions: Core thickness 50mm Total height 340mm ‘including 40mm pipes’ Width 440mm Pipe diameter used 45mm o.d. Hose colour shown for illustraion purposes only Registered Design Right number: 6030023 AIRTEC part no: ATINTMINI03

Read more less

AIRTEC front mount intercooler for the Mk2 Mazda 3 MPS. Supplied with new, modified crash bar. AIRTEC have now added a great addition to its growing range of performance intercoolers. In the way of this huge front mount intercooler for the Mazda 3 MPS Mk2. A much needed upgrade for your remapped Mazda MPS. Huge 90mm core with flowed cast end tanks High quality silicone hoses finished with stainless jubilee clips. Intercooler mounted to new modified crash bar supplied so no cutting or joining required No cutting to bumper needed Fitting instructions and all required fittings supplied Proven power increase on road and track use Available in Pro-Series black AIRTEC 3 year unlimited mileage warranty Fitting will take approximately 2-3 hours Approximate Dimensions Width – 750mm Height – 210mm Thick – 90mm Registered Design Right number: 6023248 ONLY AVAILABLE IN PRO-SERIES BLACK

Read more less

AIRTEC has released their VW Polo 1.8 TSI Front Mount Intercooler to its growing range of performance intercoolers, reasonably priced but high quality alternative. Registered Design Right number: 6023913 Airtec Part No: ATINTVAG33 TECHNICAL DATA After much research, development and testing at AIRTEC HQ, our intercooler upgrade for the VW Polo Mk6 1.8 TSI has been added to our ever-growing range of products. Built using a high flow core to offer increased cooling efficiency and performance, we take pride ensuring all of our kits are finished to our usual high standard and premium quality. Designed in the UK and offered at a reasonable price. Great addition to any standard or re-mapped Polo’s. AIRTEC front mount intercooler features: 1 x Huge stepped intercooler core 80mm bottom section and 60mm top section, with flowed cast end tanks, this means less welding and a stronger Intercooler Un-beatable value for money Proven power increase for Fast Road & Track builds Available in Pro-Series Black or Natural Silver AIRTEC 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill Fits to standard OEM hoses Approximate sizes: 800mm width 300mm height 80mm/60mm thick Intercooler Volume Capacity (The amount of charged air that the intercooler can hold)AIRTEC: 5.75 litres Registered Design Right number: 6023913

Read more less

AVAILABLE NOW FOR PRE-ORDER! Estimated delivery date Mid – End Jan 2020. AIRTEC Motorsport HUGE stage 2 front mount intercooler for PUMA MK2 ST The stage 2 intercooler utilises the large space available to fit neatly behind the front bumper. Suitable for modified PUMA MK2 ST that require the highest level of cooling efficiency and performance for track or fast road use. Introductory price – £495!

Read more less

TECHNICAL DATA Silicon hose and boost pipe kit for Airtec front mount intercooler – Fabia VRS, Ibiza Mk4 and Polo 1.9 PD130 Diesel. We take a huge amount of pride in making sure our kits are finished to an Extremely high standard. This kit is designed to fit the AIRTEC front mount intercooler conversion – Fabia VRS, Ibiza Mk4 and Polo 1.9 PD130 Diesel Can be adapted to suit a number of VAG applications Un-Beatable value for money Hoses available in a variety of colours, Red, black and blue usually kept in stock. Gloss Black, Race Red, Performance Blue normally kept in stock. Other colour hoses, made to order Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange, Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue Please allow 2-4 weeks for delivery.  part no: ATINTVAG31

Read more less

Is your intercooler looking a bit run down? AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler. Stencils available for all AIRTEC intercoolers.     Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1) Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane. Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3) Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

Read more less

As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our intercooler upgrade for the F56 JCW model, suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a taller core with  increased depth. This offers a massive increase in overall capacity in comparison to the original intercooler, as well as an increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Available in a high quality powder coated black finish, the comprehensive kit is a direct replacement comes with all fixtures and fittings, as well as detailed fitting instructions. Dimensions:Width: 810mmHeight: 230mmDepth: 140/40mm steppedCapacity: 22.1 litresFront area: 1,870cm² Features: Stepped intercooler design for maximum flow Designed and manufactured in the UK by AIRTEC AIRTEC cast end tanks for improved airflow and unbeatable strength Increase in overall capacity compared to original intercooler Increase in frontal area compared to original intercooler 3-year unlimited mileage warranty Available in Pro-Series black finish AIRTEC logo available at no extra charge Unbeatable value for money! AIRTEC part no: ATINTMINI07

Read more less