Alloy Gators

Racingline High-flow Air Filter One of the most cost-effective improvements you can make to your car, improving power and economy. The Racingline Performance Panel Filter simply fits directly into the airbox as a direct replacement for the standard restrictive paper air filter element.

Read more less

Racingline High-flow Air Filter One of the most cost-effective improvements you can make to your car, improving power and economy. The Racingline Performance Panel Filter simply fits directly into the airbox as a direct replacement for the standard restrictive paper air filter element. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR11G701

Read more less

Racingline Performance Sport Spring Set Lowering Range:* 20-25mm Front and Rear* GTI Models approximately 20-25mm Front and Rear* GTD Models approximately 20-25mm Front and Rear* 'R' Models approximately 20-25mm Front and Rear Racingline Performance Sport Springs are engineered to replace the standard springs with a shorter and stiffer spring, while lowering the centre of gravity they will also help to reduce body roll for better handing over the standard springs and while offering fantastic ride quality and comfort, which can be improved from the standard ride on some applications. These springs have been designed to work in harmony with the standard dampers so no other changes are needed. Racingline Performance Sport Springs are for customers who demand performance over the stock setup without costing thousands! The spring range offered by Racingline Performance are not designed to drastically lower the vehicle, however for those of you who do want this you can look at the Racingline Performance range of coilover kits.

Read more less

Racingline Performance Sport Spring Set for the Golf Mk7 'GTD' Estate Lowering Range:* 25mm Front* 20mm Rear Racingline Performance Sport Springs are engineered to replace the standard springs with a shorter and stiffer spring, while lowering the centre of gravity they will also help to reduce body roll for better handing over the standard springs and while offering fantastic ride quality and comfort, which can be improved from the standard ride on some applications. These springs have been designed to work in harmony with the standard dampers so no other changes are needed. Racingline Performance Sport Springs are for customers who demand performance over the stock setup without costing thousands! The spring range offered by Racingline Performance are not designed to drastically lower the vehicle, however for those of you who do want this you can look at the Racingline Performance range of coilover kits.

Read more less

Racingline Performance Sport Spring Set for the Golf Mk7 'R' Estate Lowering Range:* 20mm Front and Rear Racingline Performance Sport Springs are engineered to replace the standard springs with a shorter and stiffer spring, while lowering the centre of gravity they will also help to reduce body roll for better handing over the standard springs and while offering fantastic ride quality and comfort, which can be improved from the standard ride on some applications. These springs have been designed to work in harmony with the standard dampers so no other changes are needed. Racingline Performance Sport Springs are for customers who demand performance over the stock setup without costing thousands! The spring range offered by Racingline Performance are not designed to drastically lower the vehicle, however for those of you who do want this you can look at the Racingline Performance range of coilover kits.

Read more less

Racingline Performance Stage 3 Brake Kit - 355mm - MQB Cars The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing.Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 355mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. What's in the Kit? - Monoblock Front Brake Calipers (Pair)- Caliper Mounting Brackets (Pair)- Full Mounting Bolt Kit- Braided Steel Front Brake Line Set- Sport Brake Pad Set (Fast Road Use)- 355mm Fully Floating 2 Piece Brake Discs (Pair)If you are looking for replacement brake pad options for this brake kit, Please --> CLICK HERE!! <--Notes: - 355mm kit will fit under 18" Alloy Wheels- Factory 18" wheels and other brands may require spacers- Racingline and Neuspeed 18" wheels will not require Spacers- When using this kit on Track, it is important to remove the dust boots from the caliper pistons.

Read more less

Racingline Performance Stage 3 Brake Kit - 380mm - MQB Cars The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing.Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 380mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. What's in the Kit? - Monoblock Front Brake Calipers (Pair)- Caliper Mounting Brackets (Pair)- Full Mounting Bolt Kit- Braided Steel Front Brake Line Set- Sport Brake Pad Set (Fast Road Use)- 380mm Fully Floating 2 Piece Brake Discs (Pair)If you are looking for replacement brake pad options for this brake kit, Please -- Contact UsNotes: - 380mm kit will fit under 19" Alloy Wheels- Factory 19" wheels and other brands may require spacers- Racingline and Neuspeed 19" wheels will not require Spacers- When using this kit on Track, it is important to remove the dust boots from the caliper pistons.

Read more less

Racingline Performance - Upper Gearbox Mount Fits:* Golf Mk7 GTI* Golf Mk7 R* Leon Cupra 280* A3 8V* S3 8V* Octavia vRS Mk3 To harness your power increases, and transfer that power to the road or track where you need it, Racingline Performance Engine Mounts will give a much more solid drive, and crucially give additional durability. The Racingline Performance Engine Mounts are certainly not one of the most exciting or visual modifications that you can do to your car! But they are truly one of the most worthwhile for anyone who appreciates the driving dynamics of their car. Almost everyone who tries these mounts on a Golf or Scirocco wants them. WHAT DO THE ENGINE MOUNTS DO?The whole engine and gearbox is located in only three places. One at engine-side plus another at the end of the gearbox which support the weight of the whole drivetrain, plus a third torque arm underneath the engine to contain the fore-aft movement (often called the pendulum or dog-bone mount). The standard car uses very compliant rubber in these mounts to give a soft take-up of power and isolate the cabin from drivetrain noise. For a daily driven standard car, these bushings do a good job of keeping cabin vibration to a minimum. But when you ask more of these mounts, with higher power or hard driving, the flex in the bushes becomes very noticeable. This gives a slightly loose feeling to the drivetrain and an increased chance of wheel-hop under hard acceleration as the whole engine and 'box assembly judders. If your car produces high power, or has covered quite a few road miles, or is driven hard, the softness of these three standard rubber mounts allows more and more movement as you come on and off the power. With worn mounts, we have even seen failures of the exhaust manifold and driveshafts as the whole drivetrain shifts around under load. WHAT DIFFERENCE DO THE Racingline Performance MOUNTS MAKE?The Racingline Performance engine mounts stiffen the whole location of the drivetrain greatly to give a much crisper feeling to your car. This means no more jerky behaviour on and off the throttle or when you change gear, and all-but eliminates 'wheel hop' off the line. Of course, a bit more noise from the drivetrain comes into the cabin, but most keen drivers love the sense that they are more 'connected' to their car. As opposed to some aftermarket 'push in' bushes which crudely fill the voids in the factory mounts, the Volkswagen units are completely redesigned replacement mount assemblies. We specify a stiff urethane of 75A durometer which allows some movement within the mounts, and filters much of the drivetrain's vibration but with a design that very significantly reduces the movement on each. For most road cars, we'd recommend the lower engine mount on its own, leaving the two upper mounts standard. This makes a huge difference to how the car drives, and is a pretty minimal difference to the cabin refinement. The lower engine mount on its own is one of our most popular upgrades for Golfs and Sciroccos. For more heavily modified, track and motorsport cars, all three mounts should be upgraded.

Read more less

Racingline Performance ‘R360’ 19″ Alloy Wheels The R360 takes all the attributes of our race wheels of strength, lightness and the peace of mind of UK manufacture – then adds in a large helping of style. Three luxurious finishes://  Gunmetal Grey//  Star Silver// Gloss Black *NEW* At 10.5kg, 23.15lb, each R360 weighs up to 2kg less than the OEM wheels. Produced to the highest specification in the UK to meet (and exceed) OEM standards and the reassurance of full TÜV international approval. Combining lightness, strength and a stunning OEM+ inspired 10 spoke design finished in a gloss gunmetal finish. Technical This 19″x 8.5″ rim has an offset of ET44. That’s perfect for all Golf 7 and other MQB-platform cars, together with the A5-platform cars (such as Golf 5/6 ) and other 5x112pcd VWG vehicles.  It looks simply perfect on these models, filling the arches to perfection. We recommend a tyre size of 235/35 R19 for these wheels to maintain wheel arch clearance.  Note that for Golf 5/6 applications, where arch clearance is tight we would recommend a 225/35 R19 tyre. Notes:* 8.5J x 19″* 5 x 112 PCD* ET44 Offset* Sold as a Set of 4x Alloy wheels* Also available individually – contact usfor details* Tyres not included but available as an extra – contact us for details Precision Engineering Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR600360BLK

Read more less

Racingline Performance ‘R360’ 19″ Alloy Wheels The R360 takes all the attributes of our race wheels of strength, lightness and the peace of mind of UK manufacture – then adds in a large helping of style. Two luxurious finishes://  Gunmetal Grey//  Star Silver At 10.5kg, 23.15lb, each R360 weighs up to 2kg less than the OEM wheels. Produced to the highest specification in the UK to meet (and exceed) OEM standards and the reassurance of full TÜV international approval. Combining lightness, strength and a stunning OEM+ inspired 10 spoke design finished in a gloss gunmetal finish. Technical This 19″x 8.5″ rim has an offset of ET44. That’s perfect for all Golf 7 and other MQB-platform cars, together with the A5-platform cars (such as Golf 5/6 ) and other 5x112pcd VWG vehicles.  It looks simply perfect on these models, filling the arches to perfection. We recommend a tyre size of 235/35 R19 for these wheels to maintain wheel arch clearance.  Note that for Golf 5/6 applications, where arch clearance is tight we would recommend a 225/35 R19 tyre. Notes:* 8.5J x 19″* 5 x 112 PCD* ET44 Offset* Sold as a Set of 4x Alloy wheels* Also available individually – contact usfor details* Tyres not included but available as an extra – contact us for details

Read more less

Racingline Performance ‘R360’ 19″ Alloy Wheels The R360 takes all the attributes of our race wheels of strength, lightness and the peace of mind of UK manufacture – then adds in a large helping of style. Three luxurious finishes://  Gunmetal Grey//  Star Silver// Gloss Black *NEW* At 10.5kg, 23.15lb, each R360 weighs up to 2kg less than the OEM wheels. Produced to the highest specification in the UK to meet (and exceed) OEM standards and the reassurance of full TÜV international approval. Combining lightness, strength and a stunning OEM+ inspired 10 spoke design finished in a gloss gunmetal finish. Technical This 19″x 8.5″ rim has an offset of ET44. That’s perfect for all Golf 7 and other MQB-platform cars, together with the A5-platform cars (such as Golf 5/6 ) and other 5x112pcd VWG vehicles.  It looks simply perfect on these models, filling the arches to perfection. We recommend a tyre size of 235/35 R19 for these wheels to maintain wheel arch clearance.  Note that for Golf 5/6 applications, where arch clearance is tight we would recommend a 225/35 R19 tyre. Notes:* 8.5J x 19″* 5 x 112 PCD* ET44 Offset* Sold as a Set of 4x Alloy wheels* Also available individually – contact usfor details* Tyres not included but available as an extra – contact us for details Precision Engineering Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR600360GUN

Read more less

Racingline Performance ‘R360’ 19″ Alloy Wheels The R360 takes all the attributes of our race wheels of strength, lightness and the peace of mind of UK manufacture – then adds in a large helping of style. Two luxurious finishes://  Gunmetal Grey//  Star Silver At 10.5kg, 23.15lb, each R360 weighs up to 2kg less than the OEM wheels. Produced to the highest specification in the UK to meet (and exceed) OEM standards and the reassurance of full TÜV international approval. Combining lightness, strength and a stunning OEM+ inspired 10 spoke design finished in a gloss gunmetal finish. Technical This 19″x 8.5″ rim has an offset of ET44. That’s perfect for all Golf 7 and other MQB-platform cars, together with the A5-platform cars (such as Golf 5/6 ) and other 5x112pcd VWG vehicles.  It looks simply perfect on these models, filling the arches to perfection. We recommend a tyre size of 235/35 R19 for these wheels to maintain wheel arch clearance.  Note that for Golf 5/6 applications, where arch clearance is tight we would recommend a 225/35 R19 tyre. Notes:* 8.5J x 19″* 5 x 112 PCD* ET44 Offset* Sold as a Set of 4x Alloy wheels* Also available individually – contact usfor details* Tyres not included but available as an extra – contact us for details Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8P) 2003-2013 Audi A3 (8V) 2012-present Audi S3 (8P) 2003-2013 Audi S3 (8V) 2012-present Audi TT (8J) 2006-2014 Audi TT (8S) 2014-present Audi TT RS (8J) 2006-2014 Audi TTS (8J) 2006-2014 Audi TTS (8S) 2014-present Seat Leon (2nd gen) 2005-2012 Seat Leon (3rd gen) 2013-present Skoda Octavia (2nd gen) 2004-2013 Skoda Octavia (3rd gen) 2013-present Skoda Superb (3rd gen) 2015-present Volkswagen Golf Mk5 2003-2008 Volkswagen Golf Mk6 2008-2012 Volkswagen Golf Mk7 2012-present Volkswagen Passat VI (B8) 2014-present Volkswagen Scirocco III 2008-present

Read more less