Auto Specialists Shop
Auto Specialists Fiesta Mk7 Bonnet spacer blocks 'release the heat' Includes ST & ZS Models
After being very popular for other ford models, AutoSpecialists are pleased to announce their Bonnet spacer kit for Fiesta Mk7 and 7.5 including ST180 The spacers raise the rear of the bonnet up by 23mm and can be fitted within 30 minutes with special inverted bolts. HOW DO THEY FIT? Lift the bonnet up and put a soft cloth under the bottom corner of the bonnet and then one side at a time remove the 2 x 10mm bolts attaching the bonnet hinge to the bonnet, discard the old bolts and install the billet spacer block and use new inverted bolts to secure. It's that easy! A great low cost way to change the look of your Fiesta and release high under bonnet temperatures for Fast Road or Track use £34.95 for a complete kit 2 x Billet spacers and complete with stainless fixings
£42.50
-
Auto Specialists Fiesta Mk7 Battery top securing plate, Plain or with AS logo
Mirror finish stainless steel, easy fit and comes with stainless fixings. Fits all Petrol & Diesel Fiesta Mk7 Directly Replaces fords mild steel version, with something a little more shiney. Fittings included. x2 stainless washers and x2 stainless nylon nuts. If you wish to have the logo, please message us after ordering otherwise plain will be sent.
£26.04
-
Auto Specialists Polished Oil filler cap with raised oil can logo - ST, Zetec & Zetec -S Petrol models
To fit Black Top Zetec, Mk6, Mk7, Mk8 Fiesta, Mk3 FocusPush ‘n’ twist oil Filler Cap, with Raised Oil Can Logo.Made from solid billet alloy and polished to a mirror finish, this is a complete replacement cap.Please note this replacement cap is not made from stainless steel
£36.40
-
Auto Specialists Zetec & Zetec-S Mirror finish stainless steel Camshaft cover with logo.
The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.6 Petrol Fiesta Mk7 Zetec models (Except ST) Comes with stainless steel fittings, please choose from plain or logo. Please note, come with full instructions and fittings. Very Basic Mechanical Knowledge needed to fit.
£66.57
-
Auto Specialists AutoSpecialists Bonnet Spacer Blocks for Mk2 Focus
After being very popular for other ford models, AutoSpecialists are pleased to announce their Bonnet spacer kit for Focus Mk2 including RS & ST The spacers raise the rear of the bonnet up by 23mm and can be fitted within 30 minutes with special inverted bolts. HOW DO THEY FIT? Lift the bonnet up and put a soft cloth under the bottom corner of the bonnet and then one side at a time remove the 2 x 10mm bolts attaching the bonnet hinge to the bonnet, discard the old bolts and install the billet spacer block and use new inverted bolts to secure. It's that easy! A great low cost way to change the look of your Focus and release high under bonnet temperatures for Fast Road or Track use £34.95 for a complete kit 2 x Billet spacers and complete with stainless fixings
£42.50
-
Auto Specialists Zetec 1.25 & 1.4 LTR Mirror finish stainless steel Camshaft cover with logo
The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.25 & 1.4 Petrol Fiesta Mk7 Zetec models Comes with stainless steel fittings, please choose from plain or logo.
£43.42
-
Auto Specialists AutoSpecialists Wing Rail Covers for Mk2 Focus 2008 to 2011
Focus Mk2 Wing rail covers, fit over existing plastic trims Fits Focus ST Turbo & all Mk2 models from 2008 on-wards Fitting, simply remove black plastic screws with inserts, place new stainless covers on then replace plastic screws & inserts to secure. Price is per pair
£27.35
-
Auto Specialists AutoSpecialists Brake Reservoir Cap Cover with Logo
Brake reservoir cap cover with information logosGrooved inside so it fits perfectly over original Ford brake reservoir capA must for any show car, or detailed, road car!Please note, this cap is machined from alloy not stainless steel. Fits all Focus Mk2 & Fiesta Mk7 & MK8 (Including STs)
£36.40
-
Auto Specialists AutoSpecialists Dipstick Handle - Large for Mk2 Focus and Cosworth
Fits Mk2 Focus and Cosworth Aluminium dipstick handle, easy fit Takes about 5 minutes to fit and looks great! Fitting. Cut the top off the original yellow dipstick handle then slide the aluminium handle on and then tighten grub screw located on the side of the stainless handle. Made from quality Aluminium, comes with grub screw securing system
£42.50
-
Auto Specialists AutoSpecialists Brake Servo Pipe Cover with Logo for Mk2 Focus
ST and RS brake servo pipe cover with stainless fittings Covers up the brake servo pipe that runs above the cam cover at the rear of the engine bay Comes with HOT! logo and arrows pointing to exhaust manifold. Takes about 15 minutes to fit.
£30.38
-
Auto Specialists AutoSpecialists Battery Cover Top Trim with Logo for Mk2 Focus
Focus ST Battery cover top trim with logo, transforms that boring plastic battery cover. This battery top trim fits over original battery cover and is secured by x4 m5 button head allen key bolts Easy fit, takes 5 minutes to fit. Please note: Now comes with 'FST' logo - NOT 'ST Turbo' logo
£42.50
-
Auto Specialists AutoSpecialists Engine Cover Centre Plate with or without Logo for Mk2 Focus ST
Focus ST engine cover centre plate plain or with logo Please note, the logo is a self adhesive transfer which is provided seperatley with the cover. Easy fit takes 5 minutes to fit, simply sticks over existing cover with strong double sided sticky pads provided Please choose from the options list which you would prefer 1.Plain 2.Silver Team with silver ST 3.Silver Team with Red ST Red engine cover not included, just to show how it looks fitted on.
£29.17
