Brake Disc & Pad Upgrades

The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance Discs priced as pairs

Read more less

The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance Discs priced as pairs

Read more less

The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance Discs priced as pairs

Read more less

This compound has been designed specifically for road use. It combines many of the characteristics found in a pure racing material (high friction, absence of fade) but has improved cold performance, and reduced disc wear and noise.The key features of DS Performance are:High friction coefficient (0.46 average)Excellent disc lifeLow wheel dustRacing "feel"Low heat transmission to caliper - thus avoiding fluid boilDS Performance is recommended for road use only. R90 compliant (EU standard for road pads).

Read more less

Direct replacement ATE front brake discs for the BMW E46 M3 CSLOur Listings is for a pair of discs: 1x left 1x right Diameter [mm] 345 mmBrake Disc Thickness [mm] 28 mmMinimum thickness [mm] 26,4 mmSupplementary Article/Info 2 Two-piece Brake Discwith screwsBrake Disc Type Perforated / VentedMachining High-carbonSurface CoatedNumber of Holes 5Registration Type with General Certification (ABE)MAPP code availableBolt Hole Circle Ø [mm] 120 mmHeight [mm] 52,5 mmCentering Diameter [mm] 79 mmInner diameter [mm] 0 mmBore Ø [mm] 14,5 mm

Read more less

The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance Discs priced as pairs

Read more less

VBT Coated 'Plain' Brake Disc (Pair) Manufactured to OE quality standards, to a 10 microns tolerance Created from a single casting to maintain safety Include a time-saving installation guide with each set of brake discs The VBT 'Plain' range of brake discs come with a 12 month, 12,000 mile warranty when fitted by a professional outfit following the guidelines provided in the package The entire range of VBT 'Plain' discs are fully R90 compliant so there is never a compromise on safety or quality. Also available in a range of performance styles, please see other listings

Read more less

WHEEL FITMENT: Whilst we do try to ensure all our brake kits fit behind the majority of wheel types both stock and aftermarket, we make no guarantees that they will. There is a chance you will need wheel spacers to clear our brake kits. Please take the appropriate steps to ensure wheel clearance before final installation. DRILLED DISCS: Drilled discs are intended for light use, if crack form from drilled holes they have been used too hard and this is not something that is covered under warranty. If outright performance is required we strongly recommend grooved or J hooked. PRICES: - All prices shown exclude and include VAT and are correct at time of publishing and are subject to change without prior notice. - Prices do not include Shipping or Installation fees. VAT: - VAT is charged at the current rate of 20% to customers within the European Union Community. BREXIT 2021 EUROPEAN TAXATION CHANGES: For European Customers prices now displayed in cart once you enter your address will have 20% UK VAT Tax removed, however you will have to pay some form of Duties / VAT prior to delivery of your goods. If you are unsure of charges we recommend you should contact your local authorities ahead of placing your order. DISPATCH AND DELIVERY: - Our week day cut off time for same day dispatch on stocked items is 13:00 (GMT/BST). - If you need an item quickly, please contact us by phone on 0044 (0) 161 804 9888 prior to placing the order online to ensure that the item(s) you require is in stock ready to ship, - If you have ordered later than 13:00 (GMT/BST) and are looking for a same day dispatch, this can sometimes be accommodated, but please contact us first so that we can put things in place to achieve this for you. STOCK: - Our website does not display any information regarding an items stock level. Whilst we try to keep plenty of stock of our most popular items, it is not always possible for us to keep one of every option of every product on the shelf ready to ship. - If you need an order by a certain day/date, we strongly recommend you contact a member of our sales team to check the availability of the item(s) you require. - If you are planning to have your items fitted professionally, please wait until you have received and checked your goods before making any workshop or garage appointments.

Read more less

Mintex M Series compounds have a race pedigree going back over 40 years. They offer good stability, good pedal control and high fade resistance in a temperature band up to around 600C (1100F) M1144 - A fast road car and light circuit use material of medium torque and positive pressure modulation with medium fade resistance.  M1155 - A race-only material of medium torque, positive pressure modulation and high fade resistance. Suitable for Group A and Group N Rally, Dirt Track and Circuit use.  M1166 - A medium torque racing only material with positive pressure modulation and high fade resistance. Suitable for Group A and Group N Rally, Dirt Track and Circuit use. 

Read more less

These 2 piece discs are suited only for install with our rear adaption kit DI0019.If you do not have the kit already fitted please purchase these discs with the DI0019 kit here: The 2 piece brake discs are assembled with custom outer rotors available in plain, grooved or hooked. Matched with our lightweight aluminium bells anodised in black, this brake disc setup is not floating. Included in our kit: 2x 356x22 2 piece rear brake discs To complete this front brake kit you will need:1x DI0019 bracket kit1x Set of brake pads to suit your driving style Weight Per Disc:6.77kg FITS: AUDI A3 8V AUDI S3 8V AUDI RS3 8V AUDI TTRS 8S SEAT LEON MK3 SKODA OCTAVIA MK3 VW GOLF MK7

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.

Read more less