dump valves

GFB’s DV+ solution couldn’t be simpler - keep what works and replace what doesn’t. Description Worldwide Patent and Design Patent Pending Retains the factory solenoid coil for seamless integration Replaces plastic valve parts with metal for reliability and strength on chipped engines Direct-fit replacement with GFB’s TMS benefits Exclusive “pilot-actuated” valve mechanism for rapid response at high boost GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?), but the weak point however is the valve mechanism itself. So GFB’s DV+ solves this problem by replacing just the valve parts with an anodised billet aluminium housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus either a different solenoid valve to actuate the pneumatic valve or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds. What will it fit? BMW F20 235kw Petrol Engine RWD Hatchback 11/11-onBMW E92 225kw Petrol Engine RWD Coupe 09/06-12/12BMW F30, F35, F80 100kw Petrol Engine RWD Sedan 10/12-onBMW F31 100kw Petrol Engine RWD Wagon 03/13-onBMW E82 225kw Petrol Engine RWD Coupe 10/07-10/13BMW F32, F82 225kw Petrol Engine RWD Coupe 07/13-onBMW F30, F35, F80 225kw Petrol Engine RWD Sedan 10/11-onBMW F15, F85 225kw Petrol Engine AWD Closed Off-Road Vehicle 11/13-onBMW E84 224kw Gas AWD 01/13-onBMW F30, F35, F80 125kw Petrol Engine RWD Sedan 02/12-onBMW E88 225kw Petrol Engine RWD Convertible 03/08-12/13BMW F13 235kw Petrol Engine RWD Coupe 11/10-onBMW E93 225kw Petrol Engine RWD Convertible 03/07-12/12BMW F22, F87 240kw Petrol Engine RWD Coupe 10/13-onBMW F21 75kw Petrol Engine RWD Hatchback 12/11-onBMW F06 235kw Petrol Engine RWD Coupe 09/11-onBMW F01, F02, F03, F04 235kw Petrol Engine RWD Sedan 07/12-12/15ABARTH 500 Abarth 2007-on (US Version only, others coming soon) 312 99kw Petrol Engine FWD Hatchback 08/08-onABARTH 500 Abarth 2007-on (US Version only, others coming soon) 312 118kw Petrol Engine FWD Hatchback 01/11-onABARTH 500 Abarth 2007-on (US Version only, others coming soon) 312 132kw Petrol Engine FWD Hatchback 01/11-onBMW 114i 116i 118i N13B16 F20/F21 2011-on F20 125kw Petrol Engine RWD Hatchback 11/10-onBMW 114i 116i 118i N13B16 F20/F21 2011-on F21 125kw Petrol Engine RWD Hatchback 07/12-onBMW 114i 116i 118i N13B16 F20/F21 2011-on F21 100kw Petrol Engine RWD Hatchback 12/11-onBMW 114i 116i 118i N13B16 F20/F21 2011-on F20 100kw Petrol Engine RWD Hatchback 12/10-onBMW 114i 116i 118i N13B16 F20/F21 2011-on F20 75kw Petrol Engine RWD Hatchback 11/11-onDODGE Dart 2012-on PF 119kw Petrol Engine FWD Sedan 01/13-12/13DODGE Dart 2012-on PF 119kw Petrol Engine FWD Sedan 01/13-12/13DODGE Dart 2012-on PF 119kw Petrol Engine FWD Sedan 01/13-onDODGE Dart 2012-on PF 119kw Petrol Engine FWD Sedan 01/13-12/13BMW X3 x Drive 35i F25/N55 2010-on F25 225kw Petrol Engine AWD Closed Off-Road Vehicle 09/10-onBMW X3 x Drive 35i F25/N55 2010-on E70 225kw Petrol Engine AWD Closed Off-Road Vehicle 09/10-06/13BMW 640i F06/F12/F13 N55 2012-on F12 235kw Petrol Engine RWD Convertible 03/11-onBMW 335i/335i xdrive E90/E91/E92/E93 N55 2010-2012 E90 225kw Petrol Engine RWD Sedan 09/06-12/11BMW X6 xDrive35i E71 N55 2011-2013 E71, E72 225kw Petrol Engine AWD Closed Off-Road Vehicle 09/08-06/14BMW 535i F07/F10/F11 N55 2010-on F11 225kw Petrol Engine RWD Wagon 09/10-onBMW 535i F07/F10/F11 N55 2010-on F10, F18 225kw Petrol Engine RWD Sedan 12/09-onBMW 535i F07/F10/F11 N55 2010-on F07 225kw Petrol Engine RWD Hatchback 10/09-onABARTH Punto/Punto EVO Abarth 1.4 Multiair 199 114kw Petrol Engine FWD Hatchback 12/07-06/10ABARTH Punto/Punto EVO Abarth 1.4 Multiair 199 120kw Petrol Engine FWD Hatchback 10/09-onABARTH Punto/Punto EVO Abarth 1.4 Multiair 199 132kw Petrol Engine FWD Hatchback 07/08-onABARTH Punto/Punto EVO Abarth 1.4 Multiair 199 132kw Petrol Engine FWD Hatchback 12/07-12/12 

Read more less

The Kompact EM series combines world leading electronics and 20 years of blow off valve technology together to provide rapid response. The EM series is a true plug and play upgrade for OE electronic diverter valves. Featuring patent-pending pressure control, these units are faster than OE, don't leak and don't interfere with OE control systems. Patent pending integrated pressure control True plug and play upgrade Responds 57 times faster than a blink of an eye Integrated proprietary high-temperature solenoid valve Billet construction with high temperature o-rings Available in plumb back or dual port options Leak-free design, over 400% compared to OE The unique patent pending pressure control allows for the fastest responding valve on the market, a true plug and play upgrade diverter valve without additional hardware required, no hoses, no adapters, no brackets, just replace the standard unit.Billet construction and high temp proprietary materials allow for minimal leakage and maximum performance. TS-0223-1266

Read more less

Product Description The Forge Motorsport dump valve for the 2015-on 1.2 TSI engine codes CJZA, CJZC, CJZD, CYVB as found in the Skoda Fabia, Skoda Octavia, VW Golf, VW Polo, Audi A1, Audi A3, Seat Ibiza and Seat Leon. Please note this kit is only compatible with models that do not have a standard turbo mounted diverter valve. Earlier models that have a turbo mounted diverter valve as standard require the kit with part number FMDVA1TSI and FMDVATSI The 1.2 and 1.4 TSI doesn’t have a dump valve from the factory, so this product allows you to have the traditional dump valve noise between gear changes and when letting off the gas pedal. It won’t bring on any check engine lights and the car will drive just as before. This kit totally replaces the plastic pipe from turbo to manifold with a silicon hose (available in a choice of colours), and everything else you need to install the valve is included in the kit together with full instructions. Unlike other valves on the market the Forge valve will not bring on any check engine lights. ( EML )  The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Flurosilicone. This means the hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically. The use of a Flurosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty. This Forge valve set up is designed to fit with the standard intake. We cannot guarantee it will fit with all aftermarket intakes. This product design has been registered.  Registration Number:  5004511 Compatible Vehicles Audi A1 1.2 Tsi 2015 Onwards   A1 1.4TSI 2015 Onwards   A3 1.2 Tsi 2015 Onwards   A3 8V 1.4 TSI 2015 Onwards Volkswagen Golf MK7 1.4TSI   Golf Mk7 1.2TSI   Golf Mk7 1.4 150bhp   Jetta 1.4tsi 2015 Onwards   Polo 1.2 Tsi 2015 Onwards Skoda Fabia 1.2 Tsi 2015 Onwards   Octavia 1.2 Tsi 2015 Onwards Seat Ibiza 1.2 Tsi 2015 Onwards   Leon 1.2 Tsi 2015 Onwards   Leon 1.4TSI 2015 Onwards Warranty Warranty Infomation All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied. For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Read more less

This valve is for the turbocharged 1.6-litre EcoBoost petrol engine found in the Fiesta ST. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade, Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.    In The Box:1 x FMDVST180 Valve1 x FMBGFK4 Boost Tap and Bolt1 x Solenoid, Bracket and Screws1 x Blue Spring (Uprated)1 x Wiring Harness2 x Posi-taps10 x Cable Ties1 x 2000mm Length of 4mm Vacuum Hose1 x Forge Key Ring and Sticker1 x Instruction Booklet

Read more less

IWG75 Ford Focus ST / XR5 2.5L Turbo 7psi Ford Focus ST Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the IWG is easy to install and requires no special tools or fabrication. We’ve taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator. Features:– Silicone diaphragm with Nomex reinforcement to withstand high temperatures.– High grade, billet aluminium construction.– Stainless steel rods and connecting clevis for corrosion resistance.– Locking Collar design cap allows for quick spring changes (Options from 3psi to 26psi available).– AIRTEC Branded product Ideal for use with any Turbosmart boost controller. Please note: Pictures are library pictures and may not relate to actual product. AIRTEC part no: TS-0941-1010

Read more less

If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The factory diverter valve found on these cars has two distinct issues – reliability, and performance. Oh yeah, it also doesn’t make any noise! Here’s how the VTA addresses these problems. Reliability – There are two ways in which the factory diverter valve can fail; the un-reinforced rubber diaphragm can rupture, and the metal valve stem that slides in the plastic cap can stick. In both cases, there is a risk to the turbocharger, as the ECU will attempt to compensate for a boost leak by increasing the wastegate duty cycle, which increases the turbo RPM significantly. The VTA features CNC machined billet components that last a lifetime and cannot be damaged by high boost pressures or the associated increased charge temperatures. Performance – The factory diverter valve typically operates in only two states – either fully open, or fully closed. When it opens at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition, which is noticeable as a distinct “step” down in power as you roll off the throttle and the valve opens. The VTA however allows the piston to open and close progressively in response to the amount of boost pressure present, so it only vents enough air to prevent compressor surge (the primary purpose of a diverter or blow off valve). This helps to smooth out boost transitions, making the throttle response more linear and predictable, and also minimizes lag introduced by the factory diverter valve. Sound – The VTA, as its name suggests, vents the air to atmosphere for maximum “whoosh” noise when you lift off the throttle. On the Focus RS, there is no MAF sensor and hence no drivability or fuelling issues when venting to atmosphere.   VTA or DV+?Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet. Why choose a VTA over a “BOV spacer”?“BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the factory diverter components or operation method in any way. The VTA improves the operation of the factory diverter valve for sound AND performance.

Read more less

Turbosmart Kompact EM BOV Plumb Back VR2  The Turbosmart Kompact EM range combines 20 years blow off valve technology and the worlds leading electronics to provide you with a vastly accelerated response time. Produced in-house by Turbosmart themselves, the BOV Plumb Back is a billet construction that minimizes the boost leakage which in turn maximizes the performance of your vehicle.  A true plug and play upgrade for the OE electronic diverter valves, the EM BOV Plumb Back boats patent pending pressure control which provides you with the quickest responding valve on the tuning market. No additional hardware is required. The Plumb Back simply replaces the standard unit on your vehicle. Kompact EM BOV Plumb Back Key Features: Patent pending integrated pressure control True plug and play upgrade Responds 57 times faster than a blink of an eye Integrated proprietary high-temperature solenoid valve Billet construction with high temperature o-rings Available in plumb back or dual port options Leak-free design, over 400% compared to OE Turbosmart Product Number: TS-0223-1266 Please check the Application List below before purchasing the Plumb Back. Fitting Guide  |  Application List Need to Learn More? Please contact the team at AET Motorsport for further details regarding the Kompact EM BOV Plumb Back from Turbosmart. Call or Email to discuss: Tel: 01924 228042 | Email: info@aetmotorsport.com

Read more less

TS-0203-1061 A fixed 50/50 vented valve, the Turbosmart Shortie Kompact Dual Port Valves have been specifically designed to suit BorgWarner EFR and KKK turbos. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost and with age. The new BW/KKK/Ecoboost Kompact valves use billet aluminium construction give them over 30PSI boost handling capability. Designed as a bolt-on replacement of the factory valve. They also fit the popular Ford Ecoboost engines.

Read more less

This valve is an upgrade for the 2.0 turbocharged M133 DE20 LA (265 kW 355BHP version)  engine found in the Mercedes AMG A45 upto 2015. The engine as supplied by AMG has a port for a dump valve on the side of the turbo, but it is blanked off. Whilst this is fine for the stock level of tune, as the boost is turned up when the car is remapped, driveability can be effected and the car can stutter on hard acceleration, which ultimately will reduce the life of the turbo. Our valve bolts straight up to the turbo and is supplied with appropriate hardware in order to source vacuum to operate the valve. The valve features an aluminium piston for longevity, and is fully serviceable and can be rebuilt with a range of springs to suit your level of power. "Fitted to my Facelift A45 AMG. Takes some time to fit but once installed in my opinion is well worth it. Sounds great, loud enough to put a smile on your face but not intrusive or "ricery". Also a great add on for anyone going Stage 2. Thanks again ✌"   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A fixed 50/50 vented valve, the Turbosmart Shortie Kompact Dual Port valves have been specifically designed to suit BorgWarner EFR and KKK turbos. They also fit the popular Ford Ecoboost engines. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new BW/KKK/Ecoboost Kompact valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 30PSI boost handling capability. Designed as a bolt-on replacement of the factory valve on all BorgWarner EFR, KKK and most Ecoboost turbos, the Kompact Shortie Dual Port provides better boost response and greater boost handling capability. Included with each Kompact Shortie kit is:Model specific valve, Straight and Banjo Nipples, and Mounting screws. Please note: Pictures are library pictures and may not relate to actual product.

Read more less

Turbosmart Ford Fiesta ST Internal Wastegate Actuator   Turbosmart’s ever popular internal wastegate actuator range is expanding again, with the inclusion of a new unit designed specifically for the Ford Fiesta ST. The Turbosmart wastegate actuator range has been designed as a stronger, more reliable replacement for OEM parts. Like all Turbosmart parts, billet construction means they are stronger and more durable than a stock actuator, while Turbosmart’s focus on performance means boost comes on faster and holds on longer. The Turbosmart IWG-75 actuator range features:• Stable boost control• Improved boost response• Flatter boost curve in the top end• Interchangeable springs for a great range of boost levels

Read more less

The Kompact EM series combines world leading electronics and 20 years of blow off valve technology together to provide rapid response. The EM series is a true plug and play upgrade for OE electronic diverter valves. Featuring patent-pending pressure control, these units are faster than OE, don't leak and don't interfere with OE control systems. Patent pending integrated pressure control True plug and play upgrade Responds 57 times faster than a blink of an eye Integrated proprietary high-temperature solenoid valve Billet construction with high temperature o-rings Available in plumb back or dual port options Leak-free design, over 400% compared to OE  The unique patent pending pressure control allows for the fastest responding valve on the market, a true plug and play upgrade diverter valve without additional hardware required, no hoses, no adapters, no brackets, just replace the standard unit.Billet construction and high temp proprietary materials allow for minimal leakage and maximum performance  Part Number: TS-0233-1266

Read more less