Ford Focus MK1

A standard boot bulb not bright enough? The LED bulb just not quite cutting it? This is for you! The all new Boot LED replacement Unit is here, and features a whopping 18 LED'S that are all pointing in the direction that you need it! 5x Brighter than our boot bulb upgrade alone and 18x brighter than OEM, this really is Enhanced! This fully replaces the OEM unit and bulb to look fully OEM once installed! Price is for 1 Unit! Specs: Long Life Span & Fully Error Free Low Power Consumption with High Lumen Output Simple to install - Takes just seconds 12v | 5000K White | 501 T10 Fitment Confirmed Fitting Vehicles (May Fit Others Not Listed): MK6 Fiesta All Models (Including Facelift) MK7 Fiesta All Models (Including Facelift) MK8 Fiesta All Models (Including Facelift) MK1 Focus All Models (Including Facelift) MK2 Focus All Models (Including Facelift)  Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.

Read more less

Ford Focus MK1 Bonnet Strut Kit (1998-2004) The NB Styling Focus MK1 Bonnet strut kit completes the look of any Mk1 Focus, from the humble base model to the heavily modified Focus ST170 or RS Focus MK1 Bonnet Strut Kits available in Standard BLACK  Why Buy this Bonnet strut kit? First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop. Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car. Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed. “No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for. Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car” Our kit requires only a 10mm& 13mm spanner and a small screwdriver to fit. The Standard Kit contains… Steel Brackets ( Zinc coated then Powder coated Black)2 x Pressurised struts (Black or Stainless)And all new stainless steel washers and boltsOnline Fitting Instructions link CLICK HERE for FITTING GUIDE

Read more less

Tidy up your engine bay with a Proform Airbox Cover. Supplied in a choice of finishes from smooth plastic,which comes ready to be prepped and painted/hydrodipped, and OEM textured plastic for the factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the airbox cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print, and will really make your engine bay stand apart from the rest.  Please note raw items (smooth for painting) may contain minor manufacturing marks which will be easily removed during the preparation process.

Read more less

Tidy up your engine bay with one of our Proform Battery Covers. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all derivatives of the Mk1 Focus model. NB: Please note smooth plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with one of our newly revised domed Proform Brake Fluid Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all derivatives of the Mk1 Focus model. Logo vinyl sticker available separately.  NB: Please note smooth plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Here we have a custom brake reservoir cover for the MK1 Focus. This cover is quite a subtle modification but have at the images - it does hide that unsightly bottle! These covers are available in a range of finishes, including an assortment of coloured plastics. The coloured plastic covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Alternatively, the covers are available in smooth plastic, which is ready to be painted, and textured OEM plastic.  Please note that the smooth plastic item may contain minor manufacturing marks which can easily be removed during the preparation process.  Please note that brake fluid is a corrosive substance and will cause damage if it comes into contact with the paint finish. Please take extra care when fitting to wipe any excess fluid from around the cap. Perhaps even remove the cover entirely before having the vehicle serviced.   

Read more less

Here we have a custom brake reservoir cover for the MK1 Focus. This cover is quite a subtle modification but have at the images - it does hide that unsightly bottle! These covers are available in a range of finishes, including an assortment of coloured plastics. The coloured plastic covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Alternatively, the covers are available in smooth plastic, which is ready to be painted, and textured OEM plastic.  Please note that the smooth plastic item may contain minor manufacturing marks which can easily be removed during the preparation process.  Please note that brake fluid is a corrosive substance and will cause damage if it comes into contact with the paint finish. Please take extra care when fitting to wipe any excess fluid from around the cap. Perhaps even remove the cover entirely before having the vehicle serviced.   

Read more less

Tidy up your engine bay with one of our new domed Proform Coolant Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/ hydrodipped. Also available in OE style textured plastic, and range of coloured plastics including gloss black plastic and carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk 1 Focus models. NB: Please note the raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with one of our new domed Proform Coolant Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/ hydrodipped. Also available in OE style textured plastic, and range of coloured plastics including gloss black plastic and carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk 6/7/8 Fiesta and Mk 2/3/4 Focus models. NB: Please note the raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Engine Bay coolant tank cover. Supplied in smooth plastic; ready to be prepped and painted/hydrodipped; textured plastic for the OEM factory look or carbon fibre effect plastic. These covers are now also available in a range of colours. These covers have been manufactured from coloured material rather than prepped painted and lacquered. This saving in labour is reflected in the price but please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. If you would like a colour matched set, please view our painted/ hydrodipped dress up kits listed elsewhere on the site. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the coolant tank cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print, and will really make your engine bay stand apart from the rest.  Fits MK1 Focus RS and ST170 Models. NB: Please note raw parts (smooth plastic for painting) may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Diesel Oil Cap Cover. This item fits over your existing cap. Available in smooth plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk7 Fiesta and MK3 Focus models with diesel engines. This item will not fit the petrol variants. NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Engine Bay Dress Up Kit. These kits are designed to fit over the top of your existing covers and are secured in place using high quality adhesive Velcro so there is no need to remove your OE covers. Supplied in smooth plastic, the items come ready to be prepared, sanded and painted/hydrodipped. Textured plastic is also available for the OE factory look. These items are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic and gloss black plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A registered and bespoke design to us, each cover has been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the kit creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print and will really make your engine bay stand apart from the rest.  Fits all Mk1 Focus models. The kit includes: Header (Coolant) Tank Cover Battery Cover Fuse Box Cover Fitting Kit NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process. These parts are also available fully painted/ hydrodipped to show car standard and ready to fit to your vehicle.

Read more less