Ford Focus MK3

SLIGHT QUALITY ISSUE WITH A HANDFULL ON THE LAST BATCH SO THESE ARE NOW UP FOR CLEARANCE. THE MOULD APPEARS TO HAVE BLED CAUSING LITTLE BITS OF MELTED PLASTIC ON THE CLIPS WHICH NEEDS TRIMMING OFF WITH SNIPS OR A BLADE AND THE OVERALL QUALITY IS ABOUT 20% LOWER THAN EXPECTED. THESE ARE PERFECT FOR A "DIY'ER" WHO WANTS TO HAVE A FIDDLE ON THE CHEAP. NONE RETURNABLE Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.

Read more less

Here we give you the brand new wide mouth (or snorkel, as it can be known) for the MK3 focus - Facelift Models This is a straight fit with the removal of the bumper and is held on with 2 bolts! The snorkels are 3D Printed, and pressure tested prior to dispatch to ensure they are strong enough to handle all that is thrown at them! The snorkel is only available in black, However the mouth piece is available in a selection of colours! Technical Info: Max Flow - More speed = more air Prevents hot air being sucked in from the radiator Perfect finish and fit every time available in a multitude of colours Please Note: Whilst we will try and keep on top of stock we advise a 10-14 day delay on all orders, as if this needs to be made they take around 23 hours to print, then the testing to be carried out! Busy periods may be longer 

Read more less

AutoSpecialists Design extended wheel arches for the Focus ST 250 (Pre-Facelift) Suitable for the Focus MK3 ST Pre-Facelift to fit with standard front bumpers. Registered Design Right number 6012611 Part no: ASDFO21 TECHNICAL DATA AutoSpecialists Design extended wheel arches for the Focus ST 250 (Pre-Facelift) Suitable for the Focus MK3 ST Pre-Facelift to fit with standard front bumpers. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Registered Design Right number 6012611 Part no: ASDFO21

Read more less

CEUK Fog Guards for the MK3 Focus RS. Protect your fog lights whilst adding some colour or style at the same time! Cut from Premium 3mm Acrylic these don't just protect, but #Enhance Available in 5 Fluorescent Colours - or Gloss Race Style Cut from Premium 3mm Acrylic Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? The coloured versions not only add style and match your colour theme but when you turn your fog lights on they will actually light up the colour of the cover! The race ones just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right 4x Double Sided Gel Strips (Already Applied) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application! Fitting kit includes Trim Removal tool & Alcohol Wipe This product is protected under UK Copyright Law: Design Right Ref 6119915

Read more less

CEUK Fog Guards for the MK8 Fiesta. Fits ST & ST Line - other models with similar shape should fit Protect your fog lights whilst adding some colour or style at the same time! Cut from Premium 3mm Acrylic these don't just protect, but #Enhance Available in 5 Fluorescent Colours - or Gloss Black MANY different designs to choose from Cut from Premium 3mm Acrylic Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? The coloured versions not only add style and match your colour theme but when you turn your fog lights on they will actually light up the colour of the cover! The race ones just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right 4x Double Sided Gel Strips (Already Applied) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application! Fitting kit includes Trim Removal tool & Alcohol Wipe This product is protected under UK Copyright Law: Design Right Ref 6119915

Read more less

The Shiniest Gear Knob you'll ever see! The CEUK weighted gear knob is designed for 3 main reasons Aesthetically Enhancing Weight Assisted Gear Shifting Because why the F*** not! Giving you both an element of style and performance, the CEUK weighted gear knob is the nicest thing your left hand will ever touch.   Made from a single piece of Billet Aluminium and machined to a smooth perfectly shaped knob - then polished to a mirror finish! Features: T6 Billet Aluminium Etched CEUK Logo on the lower side (Not too big to ruin its amazing looks) Removeable (And potentially interchangeable down the line) Top Cap Perfectly Balanced In the Box: 1x Polished Aluminium Gear Knob 1x Polished Top Cap 1x Cap Extraction Pin Why ours? Made in the UK right here in our home town of Yorkshire (Halifax to be precise) CEUK Branded, But not too much ;) Because #Enhanced Easily Buffed & Polished to a shine if you scratch it! Fits the following Manual Vehicles: MK7 Fiesta All Models MK8 Fiesta All Models MK3 Focus All Models Transit Custom All Models And maybe more...

Read more less

The CEUK Door Lock covers are specifically designed to fit over your door Latch Unlike most plastic pieces on the market, ours are made from Aluminium and Annodised! Sold as a Pair (Left and Right) these will fit both 3 and 5 door vehicles (Click "Yes" to add rear for 5 doors if you wish for the full set) Secured on using supplied 3M VHB Tape, these are fitted in seconds Confirmed fitment: MK3 & MK3.5 Focus - 2012-2018 MK7 & MK7.5 Fiesta - 2009-2017 May fit other vehicles of Ford produced at similar time

Read more less

𝗦𝗨𝗜𝗧𝗔𝗕𝗟𝗘 𝗙𝗢𝗥 𝗙𝗢𝗥𝗗 𝗙𝗢𝗖𝗨𝗦 𝗠𝗞𝟯/𝟯.𝟱: 𝗠𝗢𝗗𝗘𝗟 𝗬𝗘𝗔𝗥 𝕄𝕂𝟛 - ℙℝ𝔼𝔽𝔸ℂ𝔼 𝟚𝟘𝟙𝟙+ 𝕄𝕂𝟛.𝟝 - 𝔽𝔸ℂ𝔼𝕃𝕀𝔽𝕋 𝟚𝟘𝟙𝟜-𝟚𝟘𝟙𝟠 THIS KIT IS NOT FOR ESTATE MODELS Emerald Struts, the easiest way to open your rear boot. Our automatic gas struts are designed by Emerald Struts, tested and trialled for a period of months to ensure they function correctly and keep you satisfied.   We provide a 12 months warranty with every order. If your item is faulty then contact our customer service team to obtain a replacement or full refund! Installation is very easy, taking as little as 10 minutes. Each product comes with a step by step 'installation guide' and our team are always here to help. Prices are individual to each model.    * All prices are inclusive of 20% VAT, VAT does not apply to non UK customers, however non UK customers may be subject to local custom charges by your government. * 𝟮 𝘅 𝘀𝗽𝗿𝗶𝗻𝗴 𝗹𝗼𝗮𝗱𝗲𝗱 𝗴𝗮𝘀 𝘀𝘁𝗿𝘂𝘁𝘀 𝘄𝗶𝘁𝗵 𝗽𝗿𝗲𝗺𝗶𝘂𝗺 𝗾𝘂𝗮𝗹𝗶𝘁𝘆 𝗺𝗲𝘁𝗮𝗹 𝗵𝗲𝗮𝗱𝘀 𝗔𝗻 𝗶𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗴𝘂𝗶𝗱𝗲 𝟭𝟮 𝗺𝗼𝗻𝘁𝗵𝘀 𝘄𝗮𝗿𝗿𝗮𝗻𝘁𝘆 DO YOU PROVIDE A WARRANTY? WE PROVIDE A 12 MONTH WARRANTY FOR FAULTY PRODUCTS, HOWEVER WE DO NOT PROVIDE A WARRANTY FOR DAMAGES CAUSED IF INSTALLED INCORRECTLY.  DO I NEED TO GET MY CAR CODED? NO, THERE IS NO CODING REQUIRED, YOU REMOVE YOUR EXISTING STRUTS AND REPLACE THEM WITH OURS. I HAVE INSTALLED THEM BUT IT ISN'T OPENING? MAKE SURE YOU ARE HOLDING DOWN THE BOOT BUTTON ON YOUR KEY FOB. ALSO ENSURE YOU FOLLOW THE 'INSTALLATION GUIDE' CORRECTLY.   THE BOOT REQUIRED MORE FORCE TO CLOSE, IS THIS NORMAL AND WILL IT CAUSE DAMAGE TO MY BOOT?  THIS IS PERFECTLY NORMAL! THE EXTRA PRESSURE IF REQUIRED AS A RESULT OF THE SPRING IN PLACE. WITHOUT THIS, THE BOOT WILL NOT 'POP' OPEN.  THE PRESSURE REQUIRED WILL EASE OVER TIME, AND YOU WILL NATURALLY ADJUST TO THIS WITHOUT EVEN REALISING.  ALL STRUTS ARE DESIGNED AND TESTED PRIOR RELEASE, TO ENSURE THEY HAVE ENOUGH POWER TO OPEN YOUR BOOT WITHOUT CAUSING DAMAGE. 

Read more less

A standard boot bulb not bright enough? The LED bulb just not quite cutting it? This is for you! The all new Boot LED replacement Unit is here, and features a whopping 18 LED'S that are all pointing in the direction that you need it! 5x Brighter than our boot bulb upgrade alone and 18x brighter than OEM, this really is Enhanced! This fully replaces the OEM unit and bulb to look fully OEM once installed! Price is for 1 Unit! Vehicles which have 2x Boot Units as standard, you will need to select the 2 unit option. If your vehicle has only 1 Unit but you would like 2, Select the " 2 Units plus extension loom  " Option Specs: Long Life Span & Fully Error Free Low Power Consumption with High Lumen Output Simple to install - Takes just seconds 12v | 5000K White OR Choice Of Colour | Direct OEM Plug Fitment Confirmed Fitting Vehicles (May Fit Others Not Listed): MK3 Focus All Models (Including Facelift) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.

Read more less

A standard Footwell unit not bright enough? The LED bulb just not quite cutting it? This is for you! The all new Footwell LED replacement Unit is here, and features a whopping 18 LED'S that are all pointing in the direction that you need it! 5x Brighter than our boot bulb upgrade alone and 18x brighter than OEM, this really is Enhanced! This fully replaces the OEM unit and lense to look fully OEM once installed! Price is for 2 Units - for both footwells Specs: Long Life Span & Fully Error Free Low Power Consumption with High Lumen Output Simple to install - Takes just seconds 12v | 5000K White OR Choice Of Colour | Direct OEM Plug Fitment Loom Included Confirmed Fitting Vehicles (May Fit Others Not Listed): MK3 Focus All Models (Including Facelift) Which have OEM footwell cabling What's Included: 2x OEM style ultra bright replacement LED Units 2x Fitting Adapter Cables Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.  

Read more less

Focus Mk3 Wing Riser Kit - Now Made from Solid Aluminium! Give your ride that aggressive look you always wanted. Designed for you in mind, keeping costs to a minimum whilst having a product thats durable and works. Black Spacers that will raise the spoiler for the Focus Zetec, Zetec S and ST Mk3. All Kits come with Stainless Steel hardware to ensure that components will never fail. Simple and easy installation.

Read more less

This beautiful piece of kit just got more personal! We give you the customisable Enhanced Performance Weighted Gear Knob Finished in an Anodized Black and supplied with a silicone ring in your chosen colour, not only does this give you an element of performance gain with its weight, combined with the comfort provided from our aesthetic design - but the look can be totally unique to yourself and your theme! The silicone Band is available in one of 4 colours and can be easily removed and replaced with another colour, by simply purchasing our silicone ring pack! Summary Hard Anodised in Black for that perfect aesthetic Choice of 4 colours - as well as additional ring pack Laser Engraved EP (Enhanced Performance) Logo Direct replacement for existing Gear Knob Confirmed fitment: Ford Fiesta MK7 with Lift Up reverse Lever (2012-2017) Ford Fiesta MK8 All Models Ford Focus MK3 All Models Ford Focus MK4 All Models Ford Transit Custom All Models Any Vehicle with M12 x 1.25 thread & Lift Up Reverse Lever   Please note: Whilst this is hard anodized for durability, the wearing of rings on your shift hand could cause scratches to the surface area - This isn't covered under warranty

Read more less