Ford
Maxton Design FRONT BUMPER FORD FOCUS MK3 PREFACE (FOCUS RS 2015 LOOK)
fits : Ford Focus mk3 preface version 2010 - 2014 COMPLETE SET CONTAINS: -FRONT BUMPER Please Note: By selecting “Add to cart” you are agreeing to the below statement! All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost! Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing. Product is made of Fiberglass. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£274.01 - £343.01
Maxton Design Front Bumper Spoiler for Ford Fiesta MK7 ST
COMPLETE SET CONTAINS: FRONT BUMPER SPOILER Product is made of Fiberglass. Please Note: By selecting “Add to cart” you are agreeing to the below statement! All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost! Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£134.00
Maxton Design Maxton Design - Front Bumper Spoiler Ford Fiesta MK7 Facelift
COMPLETE SET CONTAINS: FRONT BUMPER SPOILER Product is made of ABS plastic. FITS: Ford Fiesta mk7 Facelift 2013 - ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£184.00
Maxton Design REAR BUMPER FORD FOCUS MK3 PREFACE (FOCUS RS 2015 LOOK)
fits : Ford Focus mk3 2010 - 2014 Please Note: By selecting “Add to cart” you are agreeing to the below statement! All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost! Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing. COMPLETE SET CONTAINS: -REAR BUMPER Product is made of Fiberglass. Reflective lights fits from preface ST mk3 model - We do not sell them with the bumper ! All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£274.01
Maxton Design SPOILER FORD FOCUS MK3 ST LOOK
its : Ford Focus 3 standard version 2010 - COMPLETE SET CONTAINS: -SPOILER Product is made of Fiberglass. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£154.00