forge Motorsport

On a tuned GTR one of the limiting factors of getting above 600bhp is the diameter of the stock airfilter pipework which won't allow higher power. The Forge Nissan R35 GTR intake uses much larger (80mm) than the stock pipework for massively improved flow and higher horsepower potential. The Pipercross filters allow unrestricted airflow from the front of the car. As a result of this improved flow, however, the GTR ECU must be remapped to take into account this extra airflow potential. Forge recommends the use of either the Cobb Accessport or EcuTek solutions, both of which will allow your GTR to reach its power goal. This intake kit WILL fit any car fitted with the pop-up bonnet safety device. For fitting instructions please see instructions Please note: The pipework in this kit is only available in a crackle black finish   *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

We have built up quite a reputation over the years for creating efficient induction kits for VAG cars which are highly respected in the market place. Everything needed to upgrade the car’s induction capability is included in the kit, including the hand-fabricated intake pipework, all silicone hoses and clips and of course, the stunning carbon-clad filter. Our kit channels ice cold air from the front ensuring that the largest volume, of the coolest possible air, is available to the engine. The combination of the large filtration area, maximises efficiency and improves the drivability and torque throughout the rev range. We must not forget, that this kit really does happen to look rather smart too! The factory MAF sensor is retained, meaning the Forge induction kit integrates seamlessly with the factory management system to provide the perfect basis for enhancing a stock car – or an essential part of higher-level tuning, remapping or additional exhaust mods. * This product is only available in BLACK with BLACK hoses only. * Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This induction kit is for the 3.2 Audi A3. The filter is a non-oiled cotton gauze high flow cone filter housed in a carbon fiber composite enclosed canister that connects directly to the an intake pickup at the front of the vehicle with an application specific inlet scoop. Everything is connected via high quality silicone couplers. The system creates a true ram air effect, and will only see airflow from outside the vehicle with absolutely no hot air from within the engine that could reduce power. We have dyno tested this kit, and have seen gains as high as 10 peak wheel horsepower improvement over the stock airbox and filter on Stage 2 tuned vehicles. Whilst Power gains may vary depending on your modifications and level of tune, this kit will offer a significant improvement over the original air box.  Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Induction Kit for VW Scirocco 1.4 Twincharged. This Induction Kit  replaces the original filter and air box to improve the breathing of your engine. Unlike many aftermarket induction kits, this kit maintains the Intake of Colder Air to ensure that performance gains achieved through using a free flowing filter are not lost by drawing in warmer air from the engine bay. Only available in Black. Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A complete induction kit for the VW Polo 1.4 GTI. Fitment of this kit will unleash the power that is being restricted by the OEM air box, improving the breathing of your engine. Unlike many aftermarket induction kits, this kit maintains the intake of Cold air to ensure that performance gains achieved through using a free flowing filter are not lost by drawing in warmer air from the engine bay.Users of this kit have reported back on the ease of installation and a sportier sound without being obtrusive. The benefit of installing this kit is even greater on mapped vehicles, when the OEM filtration system becomes a limiting factor to performance gains. Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This induction kit is for the Mk5 Golf R32. The filter is a PiperCross high flow Foam cone filter housed in a carbon fiber composite enclosed canister that connects directly to the an intake pickup at the front of the vehicle with an application specific inlet scoop. Everything is connected via high quality silicone couplers. The system creates a true ram air effect, and will only see airflow from outside the vehicle with absolutely no hot air from within the engine that could reduce power. We have dyno tested this kit, and have seen gains as high as 10 peak wheel horsepower improvement over the stock airbox and filter on Stage 2 tuned vehicles. Whilst Power gains may vary depending on your modifications and level of tune, this kit will offer a significant improvement over the original air box* *Please note some models have a noise resonator connected to the air intake pipe that will have to be disconnected and left unused when installing the Forge Motorsport induction kit. This will however not detract from the performance of the induction kit *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description Forge are proud to release these pair of inlet hoses for the Audi RS6/RS7 C8. With maximum flow in mind, the factory ribbed hoses can impair flow characteristics in the engines' turbos along with the potential to collapse from extreme vacuum that can be experienced on tuned and re-chipped engines. With the OEM hoses also being made from a ridged plastic, they may degrade and split over a prolonged period of time. Our engineers have removed the ribs to aid with flow along with slightly increasing capacity, covered by our limited lifetime warranty; using only the best materials available, the Forge inlet hoses will long outlast the OEM counterpart and along with improving aesthetics, you can be sure these hoses will not let you down.     The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* *T&C's Apply Special thanks to Stertman Motorsport for there collaborative efforts in the development of this product, check out the Forge range of products over on there site here!

Read more less

Replacement filter for the Forge Carbon Intake Kit

Read more less