30% OFF ALL REVO SOFTWARE IN MARCH. USE CODE *MODMARCH* AT CHECKOUT - INSTALL IN OUR BRADFORD HQ - click here

Home page

14 products

  • Sale -0.0% Enhanced Performance MK8 Fiesta ST Primary Intake Hose - Car Enhancements UK

    Enhanced Performance Enhanced Performance MK8 Fiesta ST Primary Intake Hose

    Enhanced Performance MK8 Fiesta ST Primary Intake Hose Replaces the OEM Restrictive plastic hose connecting the airbox to the crossover pipe. Smooth, Large bore internals allow for increased throttle response, maximum performance and a great sound when coupled with a CEUK Induction Kit! Available in 12 colours and featuring the CEUK logo!

    £88.48 - £255.23

  • Sale -0.0% Enhanced Performance PUMA MK2 ST Primary Intake Hose - Car Enhancements UK

    Enhanced Performance Enhanced Performance PUMA MK2 ST Primary Intake Hose

    Enhanced Performance PUMA MK2 ST Primary Intake Hose Replaces the OEM Restrictive plastic hose connecting the airbox to the crossover pipe. Smooth, Large bore internals allow for increased throttle response, maximum performance and a great sound when coupled with a CEUK Induction Kit! Available in 12 colours and featuring the CEUK logo!

    £88.48 - £255.23

  • FORD FIESTA ST MK8 | REVO AIR INTAKE SYSTEM - Car Enhancements UK

    Revo FORD FIESTA ST MK8 | REVO AIR INTAKE SYSTEM

    REVO OPEN CONE AIR INTAKE SYSTEM FORD FIESTA ST MK8 1.5 ECOBOOST The Revo open cone Air Intake System for the 1.5 EcoBoost engine improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo ECU Software. Engineered to directly replace the stock airbox, pipework and filter, this kit comes complete with a front silicone hose, aluminium pipe, heat shield, filter, turbo inlet silicone and fitting kit. KEY FEATURES Increased Performance & Air Flow Efficiency Three Stage Foam Filter Direct filter to turbo fitment Stepped Silicone for smooth airflow   OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and pipework which joins directly to the turbo. Revo Flush Fit silicone hoses avoid unwanted turbulence at joins and increase the rate at which air can flow ensuring maximum performance at any level of tuning. CROSS OVER PIPE The Revo engineering team knew that to create the most effective kit, every component had to be considered to maximise and smooth airspeed. The system is designed around the single-piece aluminium cross over pipe, mandrel-bent to maintain the internal diameter in the corner and to remove the restrictions found in the OEM pipe. The direct routing and increased diameter pipe offer superior flow and deliver more air to the turbocharger over a shorter period.   SILICONE HOSES The plastic hoses on the stock system are designed with a corrugated style to flex with the engine movement, while this has its place it also causes a large amount of turbulence as the airflow doesn’t have a smooth direct path to the turbo. We designed the silicone hoses with stepped internals to ensure a flush fit and to minimise turbulence while still allowing for engine movement. The turbo inlet hose has an increased inner diameter that gradually tapers from the hard pipe to turbo to optimise airflow.   AIR FILTER An intake system is only as good as the filter. This kit comes complete with a custom Revo foam filter, supported by galvanised epoxy-coated mesh for strength under load. Revo three-stage foam filters work very differently to conventional paper or cotton-gauze alternatives designed to trap particles on the outer layer. Revo filters trap debris and particles within the foam layers, allowing air to still navigate through. The spun base of the filter offers a smooth radius aluminium bell mouth, specifically designed for optimum airflow from the filter to pipe-work.   HEATSHIELD Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points to provide easy and secure installation. MOUNTING BRACKET AND FITTING KIT The Revo kits come complete with a full fitting kit that allows for easy installation. Included is a fully machined crossover bracket which increases the strength of this fixture point and alleviates any possibility of bracket failure from engine movement. RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled dyno testing. The Revo Fiesta Mk8 open cone air intake system was tested in-house to compare the performance against that of the Ford OEM intake. First tested on a vehicle running the OEM intake with Revo Stage 1 software, Revo Intercooler and a Milltek GPF back exhaust, the Revo intake was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA The results show improvement throughout the whole rev range, but especially towards the top end of the rev range. The Revo intake offering an average gain of +7WHP, and +11NM torque over the stock part. Increased airflow also delivers impressive peak performance gains of +14WHP @6200rpm and +19NM @5100RPM over the stock intake system. AIRFLOW More air, less restriction. The Revo system was tested on a flow bench to highlight the kits efficiency in allowing more air to reach the turbo, quickly and with less restriction. The OEM system reached its maximum potential of 490 cubic feet per minute with a restriction of 1082 mmWg, compared to the Revo system which was able to flow 700 CFM with a restriction of only 965 mmWg. This difference allows the engine to still make power at the top of the rev limit, whilst also highlighting the efficiency and less restriction at the lower end, resulting in smoother and increased throttle response.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Fiesta ST 1.5 EcoBoost 2018 onwards DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford Fiesta MK8 ST Open Cone Intake System Instructions NOTES Simple replacement of the OEM part

    £460.80

  • FORD PUMA ST MK2 | REVO AIR INTAKE SYSTEM - Car Enhancements UK

    Revo FORD PUMA ST MK2 | REVO AIR INTAKE SYSTEM

    REVO OPEN CONE AIR INTAKE SYSTEM FORD PUMA ST MK2 1.5 ECOBOOST The Revo open cone Air Intake System for the 1.5 EcoBoost engine improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo ECU Software. Engineered to directly replace the stock airbox, pipework and filter, this kit comes complete with a front silicone hose, aluminium pipe, heat shield, filter, turbo inlet silicone and fitting kit. KEY FEATURES Increased Performance & Air Flow Efficiency Three Stage Foam Filter Direct filter to turbo fitment Stepped Silicone for smooth airflow   OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and pipework which joins directly to the turbo. Revo Flush Fit silicone hoses avoid unwanted turbulence at joins and increase the rate at which air can flow ensuring maximum performance at any level of tuning. CROSS OVER PIPE The Revo engineering team knew that to create the most effective kit, every component had to be considered to maximise and smooth airspeed. The system is designed around the single-piece aluminium cross over pipe, mandrel-bent to maintain the internal diameter in the corner and to remove the restrictions found in the OEM pipe. The direct routing and increased diameter pipe offer superior flow and deliver more air to the turbocharger over a shorter period.   SILICONE HOSES The plastic hoses on the stock system are designed with a corrugated style to flex with the engine movement, while this has its place it also causes a large amount of turbulence as the airflow doesn’t have a smooth direct path to the turbo. We designed the silicone hoses with stepped internals to ensure a flush fit and to minimise turbulence while still allowing for engine movement. The turbo inlet hose has an increased inner diameter that gradually tapers from the hard pipe to turbo to optimise airflow.   AIR FILTER An intake system is only as good as the filter. This kit comes complete with a custom Revo foam filter, supported by galvanised epoxy-coated mesh for strength under load. Revo three-stage foam filters work very differently to conventional paper or cotton-gauze alternatives designed to trap particles on the outer layer. Revo filters trap debris and particles within the foam layers, allowing air to still navigate through. The spun base of the filter offers a smooth radius aluminium bell mouth, specifically designed for optimum airflow from the filter to pipe-work.   HEATSHIELD Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points to provide easy and secure installation. MOUNTING BRACKET AND FITTING KIT The Revo kits come complete with a full fitting kit that allows for easy installation. Included is a fully machined crossover bracket which increases the strength of this fixture point and alleviates any possibility of bracket failure from engine movement. RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled dyno testing. The Revo PUMA ST MK2 open cone air intake system was tested in-house to compare the performance against that of the Ford OEM intake. First tested on a vehicle running the OEM intake with Revo Stage 1 software, Revo Intercooler and a Milltek GPF back exhaust, the Revo intake was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA The results show improvement throughout the whole rev range, but especially towards the top end of the rev range. The Revo intake offering an average gain of +7WHP, and +11NM torque over the stock part. Increased airflow also delivers impressive peak performance gains of +14WHP @6200rpm and +19NM @5100RPM over the stock intake system. AIRFLOW More air, less restriction. The Revo system was tested on a flow bench to highlight the kits efficiency in allowing more air to reach the turbo, quickly and with less restriction. The OEM system reached its maximum potential of 490 cubic feet per minute with a restriction of 1082 mmWg, compared to the Revo system which was able to flow 700 CFM with a restriction of only 965 mmWg. This difference allows the engine to still make power at the top of the rev limit, whilst also highlighting the efficiency and less restriction at the lower end, resulting in smoother and increased throttle response.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford PUMA ST 1.5 EcoBoost 2018 onwards DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford PUMA ST MK2 Open Cone Intake System Instructions NOTES Simple replacement of the OEM part

    £460.80

  • Maxton Design - Fiesta MK8/8.5 ALL MODELS Spoiler Extension

    Maxton Design Maxton Design - Fiesta MK8/8.5 ALL MODELS Spoiler Extension

    SPOILER CAP V.1 FORD FIESTA MK8 ST / ST-LINE FITS ONLY: FORD FIESTA ST-LINE MK8 / MK8.5 (2017-Onward)FORD FIESTA ST MK8 / MK8.5 (2018-Onward) Please Note:  ** The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. ** COMPLETE SET CONTAINS:-> Spoiler Extension with 3M Tape-> Degreasing Cloth Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

    £134.00

  • MK2 Puma ST - Enhanced Performance Intake System - Car Enhancements UK

    Enhanced Performance MK2 Puma ST - Enhanced Performance Intake System

    Description The Fully Redesigned Enhanced Performance Intake system that works perfectly with the standard or modified Puma MK2 STExpect to see gains of 5-10bhp compared to the original Airbox.#Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. And starts from only £150!! Easy fitting, takes less than 15-20 minutes to install Enhancing both sound, Looks AND Performance this kit is a must have for all enthusiasts starting their modified Journey, Complete with a lifetime Guarantee Get your car ready for stage 2 and beyond! Features - CEUK “EP” Logo In Chrome - Removes ugly original plastic & restrictive airbox - Adds power and torque - more responsive and exciting driving experience - #Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') Choice of Air Filter Whats included: 1x CEUK #Enhanced Filter Cage 1x Sensor Housing Tube 1x High Flowing Cotton Air Filter 1x Fitting Kit! Video: Guarantee Lifetime Warranty and Guarantee on all Enhanced Intake Systems

    £150.00

  • MK8 / MK8.5 Fiesta ST - Enhanced Performance Intake System - Car Enhancements UK

    Enhanced Performance MK8 / MK8.5 Fiesta ST - Enhanced Performance Intake System

    Description The Fully Redesigned Enhanced Performance Intake system that works perfectly with the standard or modified Fiesta MK8 ST & MK8.5Expect to see gains of 5-10bhp compared to the original Airbox.#Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. And starts from only £150!! Easy fitting, takes less than 15-20 minutes to install Enhancing both sound, Looks AND Performance this kit is a must have for all enthusiasts starting their modified Journey, Complete with a lifetime Guarantee Get your car ready for stage 2 and beyond! Features - CEUK “EP” Logo In Chrome - Removes ugly original plastic & restrictive airbox - Adds power and torque - more responsive and exciting driving experience - #Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') Choice of Air Filter Whats included: 1x CEUK #Enhanced Filter Cage 1x Sensor Housing Tube 1x High Flowing Cotton Air Filter 1x Fitting Kit! Video: Guarantee Lifetime Warranty and Guarantee on all Enhanced Intake Systems

    £150.00

  • Sale -10% MK8 Fiesta ST Milltek Sport GPF Back Exhaust (Valved) - Car Enhancements UK

    Milltek Sport MK8 Fiesta ST Milltek Sport GPF Back Exhaust (Valved)

    Milltek Fiesta ST GPF Cat Back The new ecoboost makes a fantasic noise so why not show it off with millteks latest Exhaust The system features a full 70mm bore size, full stainless pipework and 2x GT90 Style Tailpipes Gasket and fitting kit Huge Increase in bore size 70mm Class Quality and Guarantee of the milltek sport brand Retains original Valve so sports modes work as stock Fantastic choice of tailpipe trims - choose from drop down menu Please note: Although we carry a large amount of stock in house, there may be times of the year where delays are caused due to sell outs. If concerned please contact us to check stock

    £810.05 - £1,098.40

  • REAR SIDE SPLITTERS AUDI RS6 AVANT C6 - Car Enhancements UK

    Maxton Design REAR SIDE SPLITTERS AUDI RS6 AVANT C6

    Rear Side Splitters Audi RS6 Avant C6 FITS ONLY:Audi RS6 Avant C6 (2007-2010) COMPLETE SET CONTAINS:-> Diffusers (Left+Right)Fitting manuals: REAR SIDE SPLITTERS INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

    £94.00

  • REAR SIDE SPLITTERS BMW X3 M-PACK F25 - Car Enhancements UK

    Maxton Design REAR SIDE SPLITTERS BMW X3 M-PACK F25

    Rear Side Splitters BMW X3 M-Pack F25 FITS ONLY:BMW X3 M-Pack F25 (2010-2014) COMPLETE SET CONTAINS:-> Diffusers (Left+Right)Fitting manuals: REAR SIDE SPLITTERS INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

    £94.00

  • REAR SIDE SPLITTERS PORSCHE MACAN MK1 FACELIFT 2 - Car Enhancements UK

    Maxton Design REAR SIDE SPLITTERS PORSCHE MACAN MK1 FACELIFT 2

    Rear Side Splitters Porsche Macan Mk1 Facelift 2 FITS ONLY:Porsche Macan Standard Mk1 Facelift 2 (2021-)Porsche Macan T Mk1 Facelift 2 (2021-) COMPLETE SET CONTAINS:-> Diffusers (Left+Right)Fitting manuals: REAR SIDE SPLITTERS INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. SHIPPING AND RETURNS

    £94.00

  • REAR VALANCE PORSCHE MACAN MK1 FACELIFT 2 - Car Enhancements UK

    Maxton Design REAR VALANCE PORSCHE MACAN MK1 FACELIFT 2

    Rear Valance Porsche Macan Mk1 Facelift 2 FITS ONLY:Porsche Macan Standard Mk1 Facelift 2 (2021-)Porsche Macan T Mk1 Facelift 2 (2021-)** Fits original bumper, no modifications required ** COMPLETE SET CONTAINS: - Rear Diffuser This product is an add-on to the original diffuser. We recommend using a strong adhesive to secure fitment, such as tiger sealant. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. SHIPPING AND RETURNS DOWNLOAD FITTING MANUAL Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £149.00

Login

Forgot your password?

Don't have an account yet?
Create account