30% OFF ALL REVO SOFTWARE IN MARCH. USE CODE *MODMARCH* AT CHECKOUT - INSTALL IN OUR BRADFORD HQ - click here

Maxton – BMW M3 E92 2007

10 products

  • BMW M3 E92 WIDE BODY + SET OF CARBON SPLITTERS - Car Enhancements UK

    Maxton Design BMW M3 E92 WIDE BODY + SET OF CARBON SPLITTERS

    WIDE BODY + SET OF CARBON SPLITTERS BMW M3 E92fits: BMW M3 E92 2007-2013     COMPLETE SET CONTAINS:  -FRONT SPLITTER  -FRONT FENDERS - Enlarges + 5cm on each side (Width 187.2 cm) - REAR FENDERS - Enlarges + 9cm on each side (Width 198.2 cm)  -SIDE EXTENSIONS OF REAR BUMPER - DUCKTAIL SPOILER - FRONT SPLITTER - CARBON - SIDE SKIRTS - CARBON  -REAR DIFFUSER - CARBON Product is made of Fiberglass.All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £3,199.08

  • BMW M3 E92 REAR WINDOW LOUVER - Car Enhancements UK

    Maxton Design BMW M3 E92 REAR WINDOW LOUVER

    REAR WINDOW LOUVER BMW M3 E92fits: BMW M3 E92 2007-2013     COMPLETE SET CONTAINS:  -REAR WINDOW LOUVER   Product is made of ABS plastic.     ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £759.01

  • DUCKTAIL SPOILER BMW M3 E92 - Car Enhancements UK

    Maxton Design DUCKTAIL SPOILER BMW M3 E92

    DUCKTAIL SPOILER BMW M3 E92fits: BMW M3 E92 2007-2013     COMPLETE SET CONTAINS:  -DUCKTAIL SPOILER Product is made of Fiberglass.All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £189.01

  • CANARDS BMW M3 E92 / E93 (PREFACE MODEL) - Car Enhancements UK

    Maxton Design CANARDS BMW M3 E92 / E93 (PREFACE MODEL)

    CANARDS BMW M3 E92 / E93fits : BMW M3 E92 / E93 (Coupe & Cabrio) version 2007-2013   COMPLETE SET CONTAINS:  -CANARDS  -Mounting kit     Canards are in black colour & ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Product is made of ABS plastic.   ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £59.00

  • REAR DIFFUSER BMW M3 E92 / E93 - Car Enhancements UK

    Maxton Design REAR DIFFUSER BMW M3 E92 / E93

    REAR DIFFUSER DIFFUSORS BMW M3 E92 / E93fits : BMW M3 E92 / E93 (Coupe & Cabrio) version 2007-2013 Photos of the product on the car are illustrative - sold products are made of black ABS.Product is universal -  mounting depends of the vehicle model.   COMPLETE SET CONTAINS:  -REAR DIFFUSER  -REAR SPLITTERS (LEFT + RIGHT) - TIE BARS 150mm  -Riveted plate Maxton design  -Mounting kit   Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £319.01

  • RACING SIDE SKIRTS DIFFUSERS BMW M3 E92 / E93 (PREFACE MODEL) - Car Enhancements UK

    Maxton Design RACING SIDE SKIRTS DIFFUSERS BMW M3 E92 / E93 (PREFACE MODEL)

    SIDE SKIRTS DIFFUSERS BMW M3 E92 / E93fits : BMW M3 E92 / E93 (Coupe & Cabrio) version 2007-2013   COMPLETE SET CONTAINS:  -SIDE SKIRTS DIFFUSERS   Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £139.01

  • SIDE SKIRTS DIFFUSERS BMW M3 E92 / E93 - Car Enhancements UK

    Maxton Design SIDE SKIRTS DIFFUSERS BMW M3 E92 / E93

    SIDE SKIRTS DIFFUSERS BMW M3 E92 / E93 (2007-2013) FITS ONLY: BMW M3 E92 / E93 COUPE / CABRIO (2007-2013) COMPLETE SET CONTAINS:-> Side Skirt Splitters-> Mounting Kit-> Mounting Manual Fitting manual: SIDE SKIRT DIFFUSERS INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.    SHIPPING AND RETURNS

    £184.00

  • FRONT SPLITTER BMW M3 E92 / E93 (PREFACE MODEL FITS M PERFORMANCE SPLITTERS) - Car Enhancements UK

    Maxton Design FRONT SPLITTER BMW M3 E92 / E93 (PREFACE MODEL FITS M PERFORMANCE SPLITTERS)

    FRONT SPLITTER BMW M3 E92 / E93fits : BMW M3 E92 / E93 (Coupe & Cabrio) version 2007-2013     Item fits to front bumper with M Performance splitters.COMPLETE SET CONTAINS: -SPLITTER /FRONT BUMPER LIP SPOILER- Mounting kit - Mounting manualSplitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic.ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   Available in three surface look options: textured, gloss black, carbon look.Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £184.00

  • FRONT RACING SPLITTER BMW M3 E92 / E93 PRE-FACELIFT (2007-2013) - Car Enhancements UK

    Maxton Design FRONT RACING SPLITTER BMW M3 E92 / E93 PRE-FACELIFT (2007-2013)

    FRONT SPLITTER BMW M3 E92 / E93fits only : BMW M3 E92 / E93 (Coupe & Cabrio) version 2007-2013 COMPLETE SET CONTAINS:  -SPLITTER /FRONT BUMPER LIP SPOILER WITH TIE BARS 150/200mm -Hybrid structure : textured/gloss black/carbon look splitter + standard racing splitter - Mounting kit  -Mounting manual   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability.Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £254.02

  • FRONT SPLITTER BMW M3 E92 / E93 (PREFACE MODEL) - Car Enhancements UK

    Maxton Design FRONT SPLITTER BMW M3 E92 / E93 (PREFACE MODEL)

    FRONT SPLITTER BMW M3 E92 / E93fits : BMW M3 E92 / E93 (Coupe & Cabrio) version 2007-2013COMPLETE SET CONTAINS:-SPLITTER /FRONT BUMPER LIP SPOILER -Mounting kit  -Mounting manual   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic.ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £184.00

Login

Forgot your password?

Don't have an account yet?
Create account