30% OFF ALL REVO SOFTWARE IN MARCH. USE CODE *MODMARCH* AT CHECKOUT - INSTALL IN OUR BRADFORD HQ - click here

Maxton-Fiesta MK7 Pre Facelift

26 products

  • Maxton Design - Ford Fiesta MK7 Spoiler extensions ST/Zetec S (2008-2017) - Car Enhancements UK

    Maxton Design Maxton Design - Ford Fiesta MK7 Spoiler extensions ST/Zetec S (2008-2017)

    Maxton Design SPOILER EXTENSION FORD FIESTA MK7 FACELIFT ST / ZETEC S Fits:  FORD FIESTA MK7 FACELIFT ST / ZETEC S version 2013 - Product code: FO-FI-7-ST-CAP1. COMPLETE SET CONTAINS: -SPOILER EXTENSION WITH 3M TAPE -DEGREASING CLOTH   Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please allow 7-10 day delay. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £134.00

  • MAXTON DESIGN SPOILER CAP V2 FIESTA MK7 ALL MODELS - Car Enhancements UK

    Maxton Design MAXTON DESIGN SPOILER CAP V2 FIESTA MK7 ST / ST Line / Zetec s

    Spoiler CAP Ford Fiesta ST Mk7 FL FITS ONLY:Ford Fiesta ST Mk7 Facelift (2013-2016) COMPLETE SET CONTAINS:-> Spoiler Extension + 3M Tape-> Degreasing Cloth-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified. Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

    £134.00

  • FRONT SPLITTER FOR FIESTA MK7 (FOR ST-LINE / ZETEC S) - Car Enhancements UK

    Maxton Design FRONT SPLITTER FOR FIESTA MK7 (FOR ST-LINE / ZETEC S)

    FRONT SPLITTER FORD FIESTA MK7 Fits:FORD FIESTA MK7 (FOR ST-LINE / ZETEC S) (2008-2012)  COMPLETE SET CONTAINS:-> Splitter/ Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual Fitting manuals: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdf Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.   We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

    £184.00

  • SIDE SKIRTS DIFFUSERS FORD FIESTA MK7 PREFACE - Car Enhancements UK

    Maxton Design SIDE SKIRTS DIFFUSERS FORD FIESTA MK7 PREFACE

    Side Skirts Diffusers Ford Fiesta Mk7 Facelift ST / Zetec S FITS ONLY:Ford Fiesta Mk7 Facelift ST / Zetec S (2013-2016) COMPLETE SET CONTAINS:-> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black Fitting manual: SIDE SKIRT DIFFUSERS INSTALLATION MANUAL CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £184.00

  • ROOF SPOILER FORD FIESTA MK7 (FOCUS RS LOOK) - Car Enhancements UK

    Maxton Design ROOF SPOILER FORD FIESTA MK7 (FOCUS RS LOOK)

    ROOF SPOILER FORD FIESTA (compatible only with standard ZETEC pre-facelift 2008-2012 roof spoiler) Please Note: By selecting “Add to cart” you are agreeing to the below statement!     All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!    Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.      Description Product is made of Fiberglass. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Fits Ford Fiesta mk7 standard version 2008 - 2013 COMPLETE SET CONTAINS: Spoiler primed Please note - to fit this spoiler you will need a ZETEC spoiler for it to be bonded to. If you purchase the spoiler without taking this into consideration, any request for a return will be subject to a 20% restocking fee! DELIVERY INFORMATION Please read carefully! Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £194.00

  • Fiesta MK7 (2008-17) Dual Exit RS Style Exhaust (Axel Back) - Car Enhancements UK

    Maxton Design Fiesta MK7 (2008-17) Dual Exit RS Style Exhaust (Axel Back)

    FORD FIESTA MK7 2008-2017 HIGH QUALITY DUAL EXIT STAINLESS STEEL AXEL-BACK EXHAUST SYSTEM WITH SILENCER AND EXHAUST PIPES fits : FORD FIESTA MK 7 2008-2017 ALL VERSIONS - STANDARD, ZETEC S, ST   Works Perfectly with the Maxton Design RS Style Rear Bumper- FO-FI-7-RS-R1F Pipe Diameter: 2.5 Inch Tip Diameter: 4 inch   COMPLETE SET CONTAINS: READY FOR MOUNTING DUAL EXIT STAINLESS STEEL AXEL-BACK EXHAUST SYSTEM WITH SILENCER AND EXHAUST PIPES    Product is made of Stainless Steel.Designed for all types of Ford Fiesta (2008-2017) :* Ford Fiesta Standard * Ford Fiesta Titanium * Ford Fiesta ZETEC * Ford Fiesta ZETEC S (ST-Line)* Ford Fiesta ST System has EEC Type-Approval certificate Homologation CEE.Approval number : e3*70/157/*2007/34*0014*00 Silencer type : 3540/Ford Fiesta   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £399.00

  • Roof Spoiler Ford Fiesta MK7 (ST/Zetec S Look) Primer Painted - Car Enhancements UK

    Maxton Design Roof Spoiler Ford Fiesta MK7 (ST/Zetec S Look) Primer Painted

    fits : Ford Fiesta mk7 standard version 2008 - Please Note: By selecting “Add to cart” you are agreeing to the below statement!   All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!    Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.    COMPLETE SET CONTAINS:  ROOF SPOILER (PRIMED)   Product is made of Fiberglass. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Part is primed in black matte. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.    This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £159.00

  • Bonnet Vents Ford Fiesta ST - Car Enhancements UK

    Maxton Design Bonnet Vents Ford Fiesta ST

    COMPLETE SET CONTAINS: Bonnet Vents Product is made of ABS plastic. PLEASE NOTE: BONNET REQUIRES CUTTING TO INSTALL ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £59.00

  • REAR BUMPER FORD FIESTA MK7 (FOCUS RS LOOK) - Car Enhancements UK

    Maxton Design REAR BUMPER FORD FIESTA MK7 (FOCUS RS LOOK)

    REAR BUMPER FORD FIESTA Description Product is made of Fiberglass. All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fiberglass characterize with increased strength and flexibility. Parts are unpainted. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: By selecting “Add to cart” you are agreeing to the below statement!   All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!  Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.    Fits Ford Fiesta mk7 standard version 2008 - 2013 COMPLETE SET CONTAINS: Bumper primed DELIVERY INFORMATION Please read carefully! Postage Costs are calculated by Maxton Design. We release all orders from Monday to Saturday We send goods in perfect condition All goods are insured for damages in transport Please check the package for any potential damages before you sign for it All eventual damages should be claimed to the courier (courier should note all damages on your copy of delivery receipt and you should make insurance claim for all damages caused in transport).Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £267.00

  • FRONT SPLITTER FORD FIESTA MK7 STANDARD - Car Enhancements UK

    Maxton Design FRONT SPLITTER FORD FIESTA MK7 STANDARD

    FRONT SPLITTER FORD FIESTA MK7 fits : FORD Fiesta mk7 standard version 2008-2013   COMPLETE SET CONTAINS: - SPLITTER /FRONT BUMPER LIP SPOILER - Mounting kit (glue, screws) - Mounting manual   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £184.00

  • ROOF SPOILER EXTENSION FORD FIESTA MK7 - PRIMER PAINTED - Car Enhancements UK

    Maxton Design ROOF SPOILER EXTENSION FORD FIESTA MK7 - PRIMER PAINTED

    fits : Ford Fiesta MK7 version 2008 -    Please Note: By selecting “Add to cart” you are agreeing to the below statement!   All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!    Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.      COMPLETE SET CONTAINS: -ROOF SPOILER EXTENSION (PRIMED)   Product is made of Fibreglass.   Parts need to be prepared and trial fitted before painting! By purchasing these parts you accept that some alterations will need to be made to ensure a perfect fit.   All parts are brand new. Material is weather resistant, will not deform in low and high temperatures. Parts made of Fibreglass characterise with increased strength and flexibility. Part is primed in grey or black matte. Buyer is advised to entrust the installation to an expert. Parts need to be prepared and trial fitted before painting.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   DELIVERY INFORMATION  Please read carefully! We realise all orders from Monday to Saturday We send goods in perfect condition All goods are insured for damages in transport Please check the package for any potential damages before you sign receipt All eventual damages should be claimed to the courier (courier should note all damages on your copy of delivery receipt and you should make insurance claim for all damages caused in transport)   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £129.01

  • SIDE SKIRTS (ST / ZETEC S LOOK) FORD FIESTA MK7 PREFACE - 3 DOOR - Car Enhancements UK

    Maxton Design SIDE SKIRTS (ST / ZETEC S LOOK) FORD FIESTA MK7 PREFACE - 3 DOOR

    SIDE SKIRTS FORD FIESTA (ST / ZETEC S LOOK) fits only : Ford Fiesta mk7 - 3 door standard version 2008 - 2013   COMPLETE SET CONTAINS: - SIDE SKIRTS Please Note: By selecting “Add to cart” you are agreeing to the below statement! All Maxton Design Fibreglass items, such as bumpers, Spoilers and spoiler extensions - as well as skirts will require “prep” before installing! These are not a simple “un-box & fit” modification. In transit, the items may get chipped or marked and as such prior to painting it is important you understand that the parts may require Filling, Sanding & Repairing prior to going to paint, which can be undertaken by any reputable body shop at minimal cost!  Return requests based on the reasons Above are not accepted so please be aware you have agreed to this statement And the definition of “Prep” prior to purchasing.    Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). DELIVERY INFORMATIONPlease read carefully!All splitters are shipped direct from Maxton Design following the below guidelines, with shipping costs being set by Maxton:We release all orders from Monday to Saturday We send goods in perfect condition All goods are insured for damages in transport Please check the package for any potential damages before you sign receipt All eventual damages should be claimed to the courier (courier should note all damages on your copy of delivery receipt and you should make insurance claim for all damages caused in transport)   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

    £119.00

Login

Forgot your password?

Don't have an account yet?
Create account