Performance - Alpha Romeo Mito

Description: The Slime Smart Spair is "THE SMART WAY TO FIX FLATS FAST". No need to jack-up the car or remove the wheel - just install Slime tyre sealant, plug in the air compressor, turn it on, reinflate and go. Stow it under your car seat or in the boot - The Smart Spair offers a portable solution for flat tire repair. No need to remove the tyre. No need to wait for recovery assistance. Avoid dangerous roadside delays. Fix a flat fast - in 15 minutes or less! Emergency repair kit fixes a in 15 minutes No need to remove the tire 300psi 12v Tyre inflator with adapters included Includes a bottle of Slime tire sealant and a portable air compressor Seals punctures up to a quarter-inch Repairs punctures up to 6mm in tubeless tyres Comes with adapters to inflate mattresses, balls or other inflatables

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Alfa Romeo MiTo All Variants 2008-. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

This is a piston design recirculation valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increasded or the engine has been modified. To ease installation the top or vacuum connection is angled.   In The Box:1 x FMDVF14R Valve1 x 2000mm of 4mm Vacuum Tube1 x 500mm of 6mm Vacuum Tube1 x Solenoid, Bracket, and Screws14 x Cable Ties1 x Uprated Blue Spring1 x Aluminium Machined Coupler1 x 4mm T Piece1 x 6mm T Piece1 x Wiring Harness1 x 6mm-4mm Plastic Reducer1 x M6 Nyloc Nut1 x Instructions1 x Forge Keyring and Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a piston design blow off valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves, but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation, the top or vacuum connection is angled.   In The Box:1 x FMDVF14A Valve1 x 2000mm of 4mm Vacuum Tube1 x 500mm of 6mm Vacuum Tube1 x Solenoid, Bracket, and Screws14 x Cable Ties1 x Uprated Blue Spring1 x Aluminium Machined Coupler1 x 4mm T Piece1 x 6mm T Piece1 x Wiring Harness1 x 6mm-4mm Plastic Reducer1 x M6 Nyloc Nut1 x Instructions1 x Forge Keyring and Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Please note that this does not fit left hand drive vehicles This polished aluminium intake completely replaces the restrictive stock airbox, and filters the air with a Forge cone filter which gives an excellent induction noise. It comes with a heat shield integrated into the design, so that the hot air is shielded from the filter, which in turn is mounted over the inner arch where it can draw in the cooler air from the front of the car. This kit contains everything necessary for installation, including high quality stainless steel hose clamps (with smooth inside suitable for rubber and silicon), all other fixing hardware and comprehensive fitting instructions. Approx 45 minutes to install. Please watch our video on how to fit an air filter without damaging it.   For Replacement filter see the link below: https://www.forgemotorsport.co.uk/76mm_ID_Rubber_Neck_Open_Cone_Air_Filter--product--948.html     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Atmospheric blow off valve for the Fiat Grande Punto 1.4 T-Jet, Abarth and Abarth Essesse and Alfa Romeo Mito fitted with the T-Jet engine. The valve itself is of dual piston design for longevity with the ability to be tuned with replacement springs if required. If you require a recirculation valve please see FMDVPUNTR Please note: this product will NOT fit the 1.4 Multiair engine, please see our separate listing FMDVF14A    In the Box:1 x Atmospheric Valve1 x Wiring Harness1 x 2 Metres of Vacuum Hose10 x Cable Ties1 x Solenoid, Bracket, and Screws1 x M6 Socket Cap Screw1 x M6 Washer1 x 5mm Self Tapping Screw1 x P Clip2 x Vacuum Taps2 x Hose Clamps1 x Silicone Blanking Cap1 x Forge Sticker     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This polished aluminium intake completely replaces the restrictive stock airbox, and filters the air with a Forge cone filter which gives an excellent induction noise. It comes with a heat shield integrated into the design, so that the hot air is shielded from the filter, which in turn is mounted over the inner arch where it can draw in the cooler air from the front of the car. This kit contains everything necessary for installation, including high quality stainless steel hose clamps (with smooth inside suitable for rubber and silicon), all other fixing hardware and comprehensive fitting instructions. Approx 45 minutes to install. Note this intake does NOT currently fit the Grande Punto Abarth or Abarth Essesse Please watch our video on how to fit an air filter without damaging it.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Please read the following notes carefully to ensure you select the correct actuator for your turbo. Fiat 500 T-Jet, Fiat Grande Punto T-Jet (including Abarth versions), Abarth T-Jet, and Alfa Mito T-Jet have the IHI turbo fitted as standard. Please select the product code FMACF500 (IHI turbo) in the above drop down menu if you have one of these vehicles.  Fiat 595 145BHP, Fiat 595 Trofeo 160BHP, Fiat 595 Turismo 165BHP, Fiat 595 Competizione 180BHP, and Fiat 695 Rivale 180BHP have either the IHI or Garrett turbo fitted as standard. Please select FMACF500 (IHI turbo) from the option menu if your 595/695 model has the IHI turbo as standard. Select FMACF14 (Garrett) if your model has the Garrett turbo as standard. Please refer to the images of the stock actuators below if you are unsure. Otherwise please refer to a Fiat Tuner for advice or contact us on 01452380999 IHI turbo stock actuator – mounting bracket fixed to actuator body. IHI turbo stock actuator (in situ) – mounting bracket fixed to actuator body. Garrett turbo stock actuator (in-situ) – mounting bracket fixed to turbo housing Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACF500/FMACF14 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less