Performance - Audi A3 8P

The calipers included in this kit come from the Audi TTRS / RS3 8P and are made by Brembo. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The calipers are offered in black, silver, grey or red with the Aston Martin logo but we can offer these calipers in almost any colour with or without almost any logo. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 4 Piston Brembo calipers2x Caliper carriers2x 362x32 2 piece front brake discs (Grooved or Drilled)1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

The calipers included in this kit are 6 Piston AP Racing Radical II . The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. This kit comes with Ferodo DS2500 brake pads. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or hooked. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. *** INSTALLATION NOTE ***This kit will only fit vehicles with 19" Wheels or larger. On SOME 19" wheels there could be contact, we strongly recommend dry fitting for clearance before final installation.Wheel spacers or replacement wheels may be required.  Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 390x34mm 2 piece front brake discs1x Braided front brake lines1x Set of Ferodo DS2500 Brake Pads4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:Brake fluid to flush system when installing

Read more less

***** RACE APPLICATION ONLY - NOT FOR ROAD USE ***** These calipers are not designed for comfort, they are designed to work! The calipers included in this kit are 6 Piston Pro 5000R made by AP Racing. They are extremely light weight at 2.78kg each. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. IMPORTANT NOTEOn some MQB Cars such as Mk7 Golf / Audi A3/S3 8V Chassis / Leon 5F / Octavia 5E - When this kit is fitted the brake discs will rub against the ball joint, a small amount of material will need to be removed from the ball joint to allow clearance. Included in our kit:2x 6 Piston AP Racing Pro5000R calipers2x Caliper carriers2x 362x32mm 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

The calipers included in this kit come from the Audi Rs4/R8 / Lamborghini Gallardo and are made by Brembo. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The calipers are black without logo but we can offer these calipers in almost any colour with or without almost any logo. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 8 Piston Brembo calipers2x Caliper carriers2x 362x32 2 piece front brake discs (Grooved Pictured, drilled is available)1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

This AP Racing caliper is made from forged aluminium and is a great alternative to the Radical 2 caliper as it will fit under most motorsport derived 18inch wheels. (PLEASE CHECK FITMENT/MEASUREMENTS BEFORE PURCHASING) The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The calipers are offered in black or red with the AP Racing logo but we can offer these calipers in almost any colour with or without almost any logo. The caliper carriers are made from highest grade, lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in a grooved pattern. Matched with our lightweight aluminium bells which are optimized for strength and cooling whilst retaining the benefit of being light weight with a black, hard anodised finish, This brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 bolts coupled with quality spring washers. Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 362x32 2 piece front brake discs (Grooved)1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts 1x Set of Ferodo DS2500 brake pads To complete this front brake kit you will need:Brake fluid to flush system when installing

Read more less

The calipers included in this kit are 4 Piston AP Racing Radical 2. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with A2 stainless steel spring washers. This brake kit is a great way of saving weight from the front axle too compared to the OE 340mm set up found on the Mk7 Golf R, GTI with upgade and Audi S3 8V our kit weighs in at 10.35Kg less: VBT Caliper Carrier - 0.415KgOE Caliper Carrier   - 2.270KgAP Caliper with brake pads - 4.390KgOE Caliper with brake pads - 6.060KgAP/VBT 362x32mm discs - 8.640KgOriginal 340mm discs      - 10.360Kg VBT Fitting Kit & Lines - 0.242KgOE Fitting Kit & Lines   - 0.158Kg Included in our kit: 2x 4 Piston AP Racing Radical 2 calipers2x Caliper carriers2x 362x32mm 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:Set of brake pads to suit your driving style and needsBrake fluid to flush system when installing

Read more less

Our disc installation kits come with everything you need to install a big brake kit excluding the calipers and pads, allowing you the quality of Vagbremtechnic products with the option to source and supply your own 'bargin' priced new or second-hand  8 Piston Brembo Calipers which can be found from the Audi RS4 B7 / Audi R8 / Lamborghini Gallardo. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit: 2x Caliper carriers2x 362x32 2 piece front brake discs (Grooved or Drilled)1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x 8 Piston Brembo caliper from Audi RS4 B7 / Audi R8 / Lamborghini Gallardo1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

Our disc installation kits come with everything you need to install a our 2 piece 362x32mm set up using TTRS/RS3 8P 4 Piston Brembo Calipers. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers2x 362x32 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Audi TTRS/RS3 4 Piston Calipers1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing Weight Per Disc:8.6kg

Read more less

AP Racing Direct Replacement Discs - 345x30mm Disc weight - 9.0kg per side For use with:Audi A3 8P 3.2Audi S3 8PVW Golf Mk5 R32VW Golf Mk6 R

Read more less

 Colour Options Available: (please leave a note selecting a colour - Additional charges may apply dependant on your selection) Black With Aston Martin Logo  Grey With Aston Martin Logo  Silver With Aston Martin Logo  Red With Aston Martin Logo  Yellow With Aston Martin Logo (this option Will Increase the price) Custom Colour & Logo (this option Will Increase the price)   The calipers included in this kit come from the Aston Martin DB9 which are the same as the Audi TTRS 8J / RS3 8P and are made by Brembo. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The calipers are offered in black, silver, grey, red or yellow with 'Aston Martin' logos but we can offer these calipers in almost any colour with or without almost any logo. Just add 'custom colour/logo' option to the basket. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 4 Piston Brembo calipers2x Caliper carriers1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving style2x Pair of brake discsBrake fluid to flush system when installingWeights: 4 Piston Brembo caliper with pads (Ferodo DS2500) - 4.0kg per side340mm VBT Grooved/VBT Hooked discs - 10.2kg per side340mm MQB Clubsport S discs - 9.8kg per side345mm AP Racing discs - 9.0kg per sideVagbremtechnic caliper carriers and fittings - >0.0kg per side (scales don't go low enough!!) 

Read more less

This front brake adaption kit allows the fitment of Audi TTRS 8J / Audi RS3 8P Calipers to VAG stock 340mm or 345mm brake discs (see below for required parts & part numbers). The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers1x Set of Stainless Steel Braided Front Brake Lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x TTRS/RS3 4 Piston Calipers (Part No’s: 8J0615107B / 8J0615108B)2x 340/345mm front brake discs (Part No: 8J0615301G or 1K0615301M or our own VBT Hooked discs 8J34030-GA or 1K34530-GA)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

This disc installation kit comes with everything you need to install our 1 piece 350x32mm front brake discs. Excluding calipers & pads. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 1 piece brake discs are 350x32mm from a different vehicle manufacturer which we have modified to allow fitment to your car. We machine the discs to offer them in either Hooked, Grooved or Dimpled. We also include hub centering rings which reduce the larger center bore of these discs to match VAG hubs to ensure correct fitment. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. New pads are highly recommended to be installed. Included in our kit:2x Caliper carriers2x 350x32 1 piece front brake discs2x Disc mounting screws2x Centre bore reducing rings1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:Porsche 996TT Calipers (Part #s 996.351.429 & 996.351.430)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less