Performance - Audi A3 (8V)

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Res-X Resonator Delete, MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro 034Motorsport is pleased to introduce the Res-X Resonator Delete for MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro Models! The 034Motorsport Res-X Resonator Delete for MkVII Volkswagen Golf R and 8V Audi A3/S3 Quattro unleashes a throaty growl that exudes the sound of performance and warns bystanders that this isn’t your average 4-cylinder. The new aggressive exhaust note is accomplished by removing the heavy factory resonator and replacing it with a ready-to-install 034Motorsport Res-X Resonator Delete. 2.0 TFSI The 034Motorsport Res-X Resonator Delete unleashes a throaty growl that exudes the sound of performance and warns bystanders that this isn’t your average 4-cylinder. The new aggressive exhaust note is accomplished by removing the heavy factory resonator and replacing it with a ready-to-install 034Motorsport Res-X Resonator Delete. No welding required! This is a true bolt-in exhaust upgrade that eliminates the quiet factory resonator for a deeper exhaust growl. Enjoy a more aggressive exhaust note with no noticeable drone inside the cabin at a fraction of the cost of more expensive cat-back systems. 8V Audi A3/S3 Quattro & MkVII Volkswagen Golf R Res-X Features 304 Stainless Steel Construction Deeper, Aggressive Exhaust Note No Added Drone Inside Cabin Lighter Than Factory Resonator Completely Reversible Installation What’s Included 034Motorsport Res-X Resonator Delete for MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro Exhaust Clamps For Bolt-In Installation x 2 Application Guide 2015 – Present Audi A3/S3 Quattro (8V – MQB) 2.0 TFSI 2015 – Present Volkswagen Golf R (MkVII – MQB) 2.0 TFSI Installation Instructions Click Here! 034-105-7041 – SUPPLIER_CODE 034-105-7041

Read more less

Direnza Performance Decat Pipe, manufactured from T304 grade, brushed stainless steel. Handcrafted by our specialist engineering team to ensure high quality & accurate fitment. A direct replacement for the stock part, Direnza mandrel-bent exhaust components are fully TIG welded and feature CNC-machined flanges for strength and an accurate, secure fit every time. Engineered to not only improve power and torque across the entire RPM range but Direnza exhaust components improve throttle response to help you push further and faster on the road or the track. Fitment Audi A3 8V 1.8 2.0 TFSI 2012-2020 models Product Category Exhaust Decat Exhaust Decat - Length (mm) 650 Exhaust Decat - Pipe Bore (mm) 88.9-76.2-65 Sensor Ports 1

Read more less

Direnza Ceramic Coated Exhaust Downpipes are manufactured from T304 grade stainless steel, and feature smooth, matte ceramic finish to give extra heat protection on those intense track-sessions. A direct replacement for the stock part, Direnza mandrel-bent exhaust components are fully TIG welded and feature CNC-machined flanges for strength and an accurate, secure fit everytime. Engineered to not only improve power and torque across the entire RPM range but Direnza exhaust components improve throttle response to help you push further and faster on the road or the track Fitment Audi A3 8V 1.8 TFSI 2013+ ModelsSeat Leon Cupra 280/290 2.0 TFSI 2013+ ModelsVolkswagen Golf Mk7 GTI 1.8/2.0 TFSI 2013+ ModelsVolkswagen Beetle MK3 1.8 TFSI 2013 onwards models Please note – This item is NOT suitable for Quattro models Product Category Exhaust Decat Exhaust Decat - Length (mm) 1040 Exhaust Decat - Pipe Bore (mm) 76-63

Read more less

Resonated (quieter). Titanium Tips Part No. Description Tailpipe Pipe Diameter Race EC MSAU618 Centre Silencer 3.00" (76.20mm) MSAU651 Rear Silencer Assembly MSAU652 x2 Tip Connecting Pipes MSVW374 x2 Titanium Tips Dual 100mm GT100 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Pair of high quality O/E style replacement Carbon Fibre tailpipes for the 4.2 V8 Audi R8. Carbon Fibre and Stainless Steel exhaust specifically designed to the Gen1 Audi R8 4.2 V8.  Dimensions: 90mm (H) x 172mm (W) x 182mm (D)

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back) this exhausts replaces the centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Please Note - This performance exhaust removes the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back) this exhausts replaces the centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the Gasoline Particulate Filter section backwards (GPF-back) this exhausts replaces the centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Please Note - This performance exhaust removes the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases.

Read more less

Resonated (quieter). Titanium Tips. EC-Approved IMPORTANT NOTE: Exhaust Only Fits Models With Fixed Beam Rear Axle And Not Independent Rear Suspension Please check Before Purchase Part No. Description Tailpipe Pipe Diameter Race EC MSAU591 Front Silencer Adapter 2.76" (70.00mm) Yes MSAU584 Front Silencer Assembly Yes MSAU585 Centre Connecting Pipe Assembly Yes MSAU586 Rear Outlet Pipe Assembly Yes MSTIP192 x2 Titanium Tip Assembly Twin 80mm GT80 Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Resonated (quieter). Polished Tips. EC-Approved IMPORTANT NOTE: Exhaust Only Fits Models With Fixed Beam Rear Axle And Not Independent Rear Suspension Please check Before Purchase Part No. Description Tailpipe Pipe Diameter Race EC MSAU591 Front Silencer Adapter 2.76" (70.00mm) Yes MSAU584 Front Silencer Assembly Yes MSAU585 Centre Connecting Pipe Assembly Yes MSAU586 Rear Outlet Pipe Assembly Yes MSVW370 x2 Polished Trim Assembly {featuring new Roll-marked Milltek Sport logo} Twin 80mm GT80 Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Resonated (quieter). Cerakote Black Tips. EC-Approved IMPORTANT NOTE: Exhaust Only Fits Models With Fixed Beam Rear Axle And Not Independent Rear Suspension Please check Before Purchase Part No. Description Tailpipe Pipe Diameter Race EC MSAU591 Front Silencer Adapter 2.76" (70.00mm) Yes MSAU584 Front Silencer Assembly Yes MSAU585 Centre Connecting Pipe Assembly Yes MSAU586 Rear Outlet Pipe Assembly Yes MSTIP177 x2 Cerakote Black Tips {featuring new Roll-marked Milltek Sport logo} Twin 80mm GT80 Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less