Performance - Audi RS6 C7

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Scorpion Exhausts Audi RS6 Avant C7 Non-resonated cat-back system Fits Years 2013 to 2018 Fits to OEM Only Pipe Diameter 70mm/2.75 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  Sports car performance with the practical comfort of an estate car the Audi RS6 really needs no introduction. With its 4.0L Twin Turbo charged V8 the RS6 produces 552bhp and 516lb ft being delivered all the way from 1,750rpm to 5,500rpm giving it a factory limited top speed of 155mph. With Audi’s quattro traction the RS6 doesn’t falter when accelerating off the line giving it a 0-60 time of 3.9 seconds, when you consider it can fit a family of four, all your luggage and the dog! We think that’s pretty remarkable. With its 20inch wheels and Audi’s factory air suspension the RS6 offers a comfortable driving experience. You can select to have Audi’s Sport Suspension Plus package which comes with sport steel springs for that firmer ride. Audi’s MMI control centre gives you the option of three different modes, comfort, dynamic and auto. In Dynamic mode drivers can adjust the steering, engine map and exhaust settings giving you the freedom to set up the car depending on your individual driving style. Scorpion Redpower are proud to offer a system that works perfect harmony with the Audi RS6. Our premium T304 Stainless steel 70mm high flow resonated or non-resonated half systems fit seamlessly with Audi’s OEM downpipes or for those looking to further enhance their driving experience Scorpion offers front resonator delete downpipes meaning buyers can tune their vehicles in stages. The new system has been developed with a high flow profile and acoustic rear silencer to eliminate drone while enhancing peak performance all without compromising on the unrivalled sound of Scorpion’s system on the RS6. We have specifically designed the RS6 system to be buyer friendly. We made the decision to split the system into five separate parts, this is so we can ship the product to our buyers more efficiently and to allow an easier installation of the product. The system comes fitted with our electronic valve plate to easily open and close the valves. Closing the valves will give you a much quieter yet still deep tone from the scorpion system perfect for those long cruising drives, open the valves up however and you will hear the 70mm high flow system to its fullest potential. We really cannot put into words how it sounds; you will have to listen for yourself by following the link below. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAUS087 Product Type Half System Resonated Non-resonated Valve Yes Fitment Years 2013 - 2018 Fits To OEM / Scorpion Model Fitment RS6 Avant C7 / RS7 C7 Pipe Diameter 70mm/2.75" * Tailpipe OE Fitment Tailpipe Diameter N/A Shipping Dimensions 119cm x 60cm x 28cm Notes Valves require O.E motors. OEM Scorpion Change Weight Difference 28 KG 23.3 KG -4.7 KG

Read more less

Direnza Performance Audi RS6 Decat Downpipes, manufactured from T304 grade, brushed stainless steel. Handcrafted by our specialist engineering team to ensure high quality & accurate fitment. Features TIG welding and CNC-machined flanges for strength and durability. Our new performance downpipes eliminate the highly restrictive OEM catalytic converter, allowing exhaust gasses to flow more freely. Engineered to unleash untapped engine performance, improve throttle response & enhance sound. T304 Stainless steel provides great rust prevention and strength Designed to be a direct replacement for ease of fitment Faster turbo spool and increased throttle response Immediate power and torque increase CNC machined flanges for that accurate fit every time Fitment Audi RS6 C7 4.0T V8 2013-2018 models System Bore (mm) 80 – 76.2 – 60.5 System Length (mm) 2×1900

Read more less

Scorpion Exhausts Audi RS6 Avant C7 Resonated cat-back system Fits Years 2013 to 2018 Fits to OEM Only Pipe Diameter 70mm/2.75 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  Sports car performance with the practical comfort of an estate car the Audi RS6 really needs no introduction. With its 4.0L Twin Turbo charged V8 the RS6 produces 552bhp and 516lb ft being delivered all the way from 1,750rpm to 5,500rpm giving it a factory limited top speed of 155mph. With Audi’s quattro traction the RS6 doesn’t falter when accelerating off the line giving it a 0-60 time of 3.9 seconds, when you consider it can fit a family of four, all your luggage and the dog! We think that’s pretty remarkable. With its 20inch wheels and Audi’s factory air suspension the RS6 offers a comfortable driving experience. You can select to have Audi’s Sport Suspension Plus package which comes with sport steel springs for that firmer ride. Audi’s MMI control centre gives you the option of three different modes, comfort, dynamic and auto. In Dynamic mode drivers can adjust the steering, engine map and exhaust settings giving you the freedom to set up the car depending on your individual driving style. Scorpion Redpower are proud to offer a system that works perfect harmony with the Audi RS6. Our premium T304 Stainless steel 70mm high flow resonated or non-resonated half systems fit seamlessly with Audi’s OEM downpipes or for those looking to further enhance their driving experience Scorpion offers front resonator delete downpipes meaning buyers can tune their vehicles in stages. The new system has been developed with a high flow profile and acoustic rear silencer to eliminate drone while enhancing peak performance all without compromising on the unrivalled sound of Scorpion’s system on the RS6. We have specifically designed the RS6 system to be buyer friendly. We made the decision to split the system into five separate parts, this is so we can ship the product to our buyers more efficiently and to allow an easier installation of the product. The system comes fitted with our electronic valve plate to easily open and close the valves. Closing the valves will give you a much quieter yet still deep tone from the scorpion system perfect for those long cruising drives, open the valves up however and you will hear the 70mm high flow system to its fullest potential. We really cannot put into words how it sounds; you will have to listen for yourself by following the link below. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAU087 Product Type Half System Resonated Resonated Valve Yes Fitment Years 2013 - 2018 Fits To OEM / Scorpion Model Fitment RS6 Avant C7 / RS7 C7 Pipe Diameter 70mm/2.75" * Tailpipe OE Fitment Tailpipe Diameter N/A Shipping Dimensions 119cm x 60cm x 28cm Notes Valves require O.E motors. OEM Scorpion Change Weight Difference 28 KG 25.45 KG -2.55 KG

Read more less

Milltek Full System Road+ with 76mm Downpipes and 100cell cats. Uses OE Tips. Requires a stage 2 ECU remap Milltek Do Not Supply The Black Valve Motors - {valve motors from the OE exhaust are required for fitment} Part No. Tip Style Pipe Diameter Race EC Valvesonic SSXAU594 2.75'' (69.85mm) Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Milltek Full System Resonated with 76mm Downpipes. Uses OE Tips. Requires a stage 2 ECU remap Milltek Do Not Supply The Black Valve Motors - {valve motors from the OE exhaust are required for fitment} Part No. Tip Style Pipe Diameter Race EC Valvesonic SSXAU597 2.75'' (69.85mm) Yes Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Resonated (quieter). Uses OE Tips. Milltek Do Not Supply The Black Valve Motors - {valve motors from the OE exhaust are required for fitment} Part No. Description Tailpipe Pipe Diameter Race EC MSAU587REP LH Front Pipe Assembly {This part is only required if fitting Milltek cat-back to OEM catalysts} 2.75" (69.85mm) Yes MSAU588REP RH Front Pipe Assembly {This part is only required if fitting Milltek cat-back to OEM catalysts} Yes MSAU570 Centre Silencer Assembly Yes MSAU589 ValveSonic LH Rear Silencer Yes MSAU590 ValveSonic RH Rear Silencer Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Milltek Full System Resonated with 76mm Downpipes and 100cell cats. Uses OE Tips. Requires a stage 2 ECU remap Milltek Do Not Supply The Black Valve Motors - {valve motors from the OE exhaust are required for fitment} Part No. Tip Style Pipe Diameter Race EC Valvesonic SSXAU596 2.75'' (69.85mm) Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Milltek Full System Non-Res with 76mm Downpipes. Uses OE Tips. Requires a stage 2 ECU remap Milltek Do Not Supply The Black Valve Motors - {valve motors from the OE exhaust are required for fitment} Part No. Tip Style Pipe Diameter Race EC Valvesonic SSXAU598 2.75'' (69.85mm) Yes Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK

Read more less

Non-resonated (louder). Uses OE Tips Milltek Do Not Supply The Black Valve Motors - {valve motors from the OE exhaust are required for fitment} Part No. Description Tailpipe Pipe Diameter Race EC MSAU587REP LH Front Pipe Assembly {This part is only required if fitting Milltek cat-back to OEM catalysts} 2.75" (69.85mm) MSAU588REP RH Front Pipe Assembly {This part is only required if fitting Milltek cat-back to OEM catalysts} MSAU570REP Centre Silencer Replacement Assembly MSAU589 ValveSonic LH Rear Silencer MSAU590 ValveSonic RH Rear Silencer Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Our Active Suspension Control (ASC) module is perfect for drivers of the growing range of vehicles equipped with factory air suspension, giving the ability to control the height of the vehicle from a simple press off a button, all from your smart phone. The module interfaces with the OEM air suspension control system to enable you to adjust the ride height, both more and less than the standard adjustment functions available in the vehicle while maintaining the factory safety parameters.       All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less

Milltek Full System Non Res with 76mm Downpipes and 100cell cats. Uses OE Tips. Requires a stage 2 ECU remap Milltek Do Not Supply The Black Valve Motors - {valve motors from the OE exhaust are required for fitment} Part No. Tip Style Pipe Diameter Race EC Valvesonic SSXAU595 2.75'' (69.85mm) Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less