Performance - Audi S3 8P

supplied with replacement solenoid and has lower profile than T9351   The T9381 is the latest addition to the DV+ family, and offers all the benefits you’d expect from a DV+: Sharper throttle response Faster boost recovery after gearshift or brief throttle lift Improved boost holding Unrivalled longevity, backed by our Lifetime Warranty  The T9351 DV+ has been and remains the workhorse of the DV+ family. By replacing the problematic valve mechanism of the factory electronic diverter whilst re-using the solenoid, the T9351 works brilliantly, keeping the cost low and the benefits high. However, with the T9351 there is an increase in overall height of 11mm, which in some cases can cause clearance issues, for example: 2013.5+ Jetta GLI VW Golf MK8 GTi and R Any MQB platform with an aftermarket intake or IS38 turbo Audi 4.0 TFSI from 2012-2017 Here’s where the T9381 comes in. Featuring a low-profile integrated solenoid, the T9381 is shorter and more compact than even the factory diverter, ensuring it will fit the tightest applications. The T9381 can also be used instead of the T9351 when you’d prefer to replace the entire factory diverter valve rather than re-use the factory solenoid (e.g. if your solenoid is faulty).   Part Number: T9381Shipping Weight: 0.2000kg The T9381 is the latest addition to the DV+ family, and offers all the benefits you’d expect from a DV+: Sharper throttle response Faster boost recovery after gearshift or brief throttle lift Improved boost holding Unrivalled longevity, backed by our Lifetime Warranty  The T9351 DV+ has been and remains the workhorse of the DV+ family. By replacing the problematic valve mechanism of the factory electronic diverter whilst re-using the solenoid, the T9351 works brilliantly, keeping the cost low and the benefits high. However, with the T9351 there is an increase in overall height of 11mm, which in some cases can cause clearance issues, for example: 2013.5+ Jetta GLI Any MQB platform with an aftermarket intake or IS38 turbo Audi 4.0 TFSI from 2012-2017 Here’s where the T9381 comes in. Featuring a low-profile integrated solenoid, the T9381 is shorter and more compact than even the factory diverter, ensuring it will fit the tightest applications. The T9381 can also be used instead of the T9351 when you’d prefer to replace the entire factory diverter valve rather than re-use the factory solenoid (e.g. if your solenoid is faulty).       SHARPER THROTTLE RESPONSE FASTER BOOST RECOVERY ON GEARSHIFT SOLVES BOOST LEAKING ISSUES BUILT TO LAST European manufacturers are pushing their engines to the limit. Get a DV to match. GFB's DV+ diverter valve range offers a direct-fit performance solution for the weak factory diverter valves used on many modern vehicles. By retaining the factory ECU control and recirculating the vented air, the DV+ is a purely performance-orientated product. GFB’s DV+ design solves the longevity and boost leaking issues that are common with factory diverter valves, and also changes the operation method to “pilot actuation” to ensure better performance on stock or modified engines. Furthermore, these benefits won’t cost you the Earth! Rather than throwing the entire factory diverter valve system in the bin (like other manufacturer’s “solutions”), the DV+ keeps what works and replaces what doesn’t. It retains the factory solenoid and ECU control to ensure simple installation and reliable operation. 10% faster opening, 50% faster closing than the factory diverter Retains the factory solenoid for seamless integration Replaces plastic valve parts with metal for reliability and strength on stock or modified engines Direct-fit replacement with GFB’s TMS benefits Exclusive “pilot-actuated” valve mechanism for rapid response at high boost

Read more less

Forge Motorsport are proud to offer the latest evolution of our popular direct turbo mounting valve for selected petrol turbocharged VAG engines.  Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)Unique slots machined in the body of the valve allows for a more effective and quicker release of air, due to larger surface areaNew and unique sound for the atmospheric modelBillet construction from aerospace grade aluminiumNo fault codes and no check engine lightsFull instructions and all parts necessary for installation included Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi.  This valve represents the latest evolution of part number FMFSITAT, and is a hybrid of sorts, that combines our existing full replacement solenoid controlled recirculating valve with our blow-off valve adapter. The result is a full replacement atmospheric blow-off valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement recirculating valve option, the FMFSITVR, the FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location. The FMFSITAT valve has a much shorter overall installed height, which enables fitment of this atmospheric valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products. Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB   In The Box:1 x FMFSITAT Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x PCV Adaptor Kit1 x Blue Spring (Uprated)10 x Cable Ties1 x 2000mm Length of 4mm Vac Hose1 x Instruction Booklet1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below. If you are unsure if this product is suitable for your application, please contact us.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Forge Motorsport are proud to offer the latest evolution of our popular direct turbo mounting valve for selected petrol turbocharged VAG engines At a glance: Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)Billet construction from aerospace grade aluminiumNo fault codes and no check engine lightsFull instructions and all parts necessary for installation included Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi. This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location. The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products. Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB   In The Box:1 x FMFSITVR Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x PCV Adaptor Kit1 x Blue Spring (Uprated)10 x Cable Ties1 x 2000mm Length of 4mm Vac Hose1 x Instruction Booklet1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below. If you are unsure if this product is suitable for your application, please contact us.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits All Vehicles

Read more less