Performance - Audi S3 (8V) WITH Gpf

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note.åÊ All relevant fittings and gaskets are supplied. This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. Press Release With a potent 2.0 TFSI engine and sure-footed quattro all-wheel drive, the latest generation of Audi S3 is a premium package. For those looking to awaken the sound and unlock the performance of their vehicle, Cobra Sport has the solution. Precision TIG-welded from T304 stainless steel, this new valved system has been specially developed to integrate with the Audi Drive modes. The valves open or close depending on the mode selected - so you can keep sound levels in check or unleash the full potential of the engine. With valves open, the sound is amplified to deliver a thrilling, aggressive note (+13dB in Dynamic Mode with non resonated cat back) but without any unwanted drone. The gear change on S-tronic models is also enhanced with a more sporty tone. Available as a resonated and non-resonated (louder) cat back setup, this 3 inch system is the perfect accompaniment to any S3 (8V). For those looking to go further, Cobra Sport sports cat/de-cat front pipes may be specified to create a full turbo-back system. With a remap, considerable power gains are achievable. A range of 3.5in (90mm) tailpipes options are available, including highly polished inverted tips, Ceramic-coated Blackout tips (optional extra) and the latest Carbon Fibre tips (optional extra), which would provide the finishing touch to any S3. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish - a feature that sets Cobra Sport apart from other manufacturers. Media Audi S3 (8V) Valved Cat Back Exhausts Showcase - (3 Door - Non Resonated Cat Back) Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back) Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) Interior Sound Example of the Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back) British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology. åÊ åÊ

Read more less

Audi S3 Hatch Back Scorpion Exhausts Cat Back - Without Valve Available in Resonated (Louder) & None Resonated (Quieter) with a choice of Polished or Ceramic Black Tips   Fitment Years: 2013 - 2016 Model: 8V Fits To: OEM / Scorpion Pipe Diameter: 76mm/3"   Stock Exhaust Power: 284.6 BHP Scorpion Exhaust Power: 288.3 BHP   One of the VAG group of companies Audi really got noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro the world’s first all-wheel drive turbo production car. A real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available now. We are proud to offer a new development for the Audi range of cars. Manufactured from premium 80mm/3.14” T304 Stainless Steel the Audi S3 8V 2.0T and our CNC Mandrel bent large bore design permits maximum performance by allowing a greater flow of exhaust gas. Currently available options are resonated valved, resonated non-valved, non-resonated valved and non-resonated non-valved. Valved - which uses the original motor and can be operated by the driver with the drive mode select button inside the car. There is also a non-valved which deletes the valve completely for a continuous sportier tone. Our system once fitted gives the car a measurable reduction in weight when compared to the OE system this is an improvement most drivers will find hard to rebuff. When applicable Scorpion systems are fitted with an acoustically developed silencer to ensure zero drone throughout the rev range. To compliment the Audi’s facelift aesthetics, we can offer three handpicked styles of our signature Scorpion tailpipes. For this system you can choose from quad Polished Daytona, Black Ceramic Daytona, or Carbon Ascari.  For those wanting to take the next step with performance upgrades our Scorpion technicians have also developed a de-cat downpipe which vastly improves flow and power over the OEM figures, or we offer a precision engineered Sports cat downpipe which has greater flow over OEM. (For closed circuit use only) If you are upgrading your exhaust insist on the enthusiast’s brand. Proven to perform at the very highest level. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAUS050D Product Type Cat-Back Resonated Non-resonated Valve No Fitment Years 2013 - 2016 Fits To OEM / Scorpion Model Fitment 8V Pipe Diameter 80mm/3.15" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 101cm x 62cm x 35cm OEM Scorpion Change Weight Difference 24 KG 19.8 KG -4.2 KG

Read more less

GPF Back - Non-resonated (louder). Quad Round Cerakote Black Tips Part No. Description TIP Style Pipe Ø (MM) Pipe Ø (INCHES) EC approved Race System Valvesonic SSXAU415 GPF back Exhaust Quad 100mm GT100B 76.2 3 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

GPF Back - Non-resonated (louder). Quad Oval Cerakote Black Tips Part No. Description TIP Style Pipe Ø (MM) Pipe Ø (INCHES) EC approved Race System Valvesonic SSXAU414 Cat-back 104x80mm Black Velvet Oval 76.2 3 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. This non-resonated sports exhaust makes the system louder as it excludes the centre silencer and therefore, has a sportier exhaust note. This exhaust is also available as a resonated version (including centre silencer) which is a quieter option. All relevant fittings and gaskets are supplied. This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before.   COBRA SPORT REVIEW   With a potent 2.0 TFSI engine and sure-footed quattro all-wheel drive, the latest generation of Audi S3 is a premium package. For those looking to awaken the sound and unlock the performance of their vehicle, Cobra Sport has the solution. Precision TIG-welded from T304 stainless steel, this new valved system has been specially developed to integrate with the Audi Drive modes. The valves open or close depending on the mode selected – so you can keep sound levels in check or unleash the full potential of the engine. With valves open, the sound is amplified to deliver a thrilling, aggressive note (+13dB in Dynamic Mode with non resonated cat back) but without any unwanted drone. The gear change on S-tronic models is also enhanced with a more sporty tone. Available as a resonated and non-resonated (louder) cat back setup, this 3 inch system is the perfect accompaniment to any S3 (8V). For those looking to go further, Cobra Sport sports cat/de-cat front pipes may be specified to create a full turbo-back system. With a remap, considerable power gains are achievable. A range of 3.5in (90mm) tailpipes options are available, including highly polished inverted tips, Ceramic-coated Blackout tips (optional extra) and the latest Carbon Fibre tips (optional extra), which would provide the finishing touch to any S3. Like all Cobra Sport exhausts, this system utilises precision TIG-welding techniques for exemplary fit and finish – a feature that sets Cobra Sport apart from other manufacturers.   RELATED MEDIA FILES   Audi S3 (8V) Valved Cat Back Exhausts Showcase - (3 Door - Non Resonated Cat Back)   Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back)   Interior Sound Example of the Audi S3 (8V) 3 Door Valved Exhaust (Non Resonated Cat Back)   Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back)   Interior Sound Example of the Audi S3 (8V) 5 Door Valved Exhaust (Resonated Cat Back)   British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.  

Read more less

Scorpion Exhausts Audi S3 2.0T 8V 3 Door & Sportback Resonated cat-back system with electronic valves Fits Years 2013 to 2016 Fits to OEM / Scorpion Pipe Diameter 76mm/3 One of the VAG group of companies Audi really got noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro the world’s first all-wheel drive turbo production car. A real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available now. We are proud to offer a new development for the Audi range of cars. Manufactured from premium 80mm/3.14” T304 Stainless Steel the Audi S3 8V 2.0T and our CNC Mandrel bent large bore design permits maximum performance by allowing a greater flow of exhaust gas. Currently available options are resonated valved, resonated non-valved, non-resonated valved and non-resonated non-valved. Valved - which uses the original motor and can be operated by the driver with the drive mode select button inside the car. There is also a non-valved which deletes the valve completely for a continuous sportier tone. Our system once fitted gives the car a measurable reduction in weight when compared to the OE system this is an improvement most drivers will find hard to rebuff. When applicable Scorpion systems are fitted with an acoustically developed silencer to ensure zero drone throughout the rev range. To compliment the Audi’s facelift aesthetics, we can offer three handpicked styles of our signature Scorpion tailpipes. For this system you can choose from quad Polished Daytona, Black Ceramic Daytona, or Carbon Ascari.  For those wanting to take the next step with performance upgrades our Scorpion technicians have also developed a de-cat downpipe which vastly improves flow and power over the OEM figures, or we offer a precision engineered Sports cat downpipe which has greater flow over OEM. (For closed circuit use only) If you are upgrading your exhaust insist on the enthusiast’s brand. Proven to perform at the very highest level. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAU049D Product Type Cat-Back Resonated Resonated Valve Yes Fitment Years 2013 - 2016 Fits To OEM / Scorpion Model Fitment 8V Pipe Diameter 80mm/3.15" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 101cm x 62cm x 35cm Notes Valves require O.E motors. OEM Scorpion Change Weight Difference 24 KG 22.45 KG -1.55 KG

Read more less

Scorpion Exhausts Audi S3 2.0T 8V 3 Door & Sportback Non-res cat-back system with electronic valves Fits Years 2013 to 2016 Fits to OEM / Scorpion Pipe Diameter 76mm/3 One of the VAG group of companies Audi really got noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro the world’s first all-wheel drive turbo production car. A real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available now. We are proud to offer a new development for the Audi range of cars. Manufactured from premium 80mm/3.14” T304 Stainless Steel the Audi S3 8V 2.0T and our CNC Mandrel bent large bore design permits maximum performance by allowing a greater flow of exhaust gas. Currently available options are resonated valved, resonated non-valved, non-resonated valved and non-resonated non-valved. Valved - which uses the original motor and can be operated by the driver with the drive mode select button inside the car. There is also a non-valved which deletes the valve completely for a continuous sportier tone. Our system once fitted gives the car a measurable reduction in weight when compared to the OE system this is an improvement most drivers will find hard to rebuff. When applicable Scorpion systems are fitted with an acoustically developed silencer to ensure zero drone throughout the rev range. To compliment the Audi’s facelift aesthetics, we can offer three handpicked styles of our signature Scorpion tailpipes. For this system you can choose from quad Polished Daytona, Black Ceramic Daytona, or Carbon Ascari.  For those wanting to take the next step with performance upgrades our Scorpion technicians have also developed a de-cat downpipe which vastly improves flow and power over the OEM figures, or we offer a precision engineered Sports cat downpipe which has greater flow over OEM. (For closed circuit use only) If you are upgrading your exhaust insist on the enthusiast’s brand. Proven to perform at the very highest level. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAUS049D Product Type Cat-Back Resonated Non-resonated Valve Yes Fitment Years 2013 - 2016 Fits To OEM / Scorpion Model Fitment 8V Pipe Diameter 80mm/3.15" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 101cm x 62cm x 35cm Notes Valves require O.E motors. OEM Scorpion Change Weight Difference 24 KG 19.8 KG -4.2 KG

Read more less

Cat Back Resonated (EC Approved) with Burnt Titanium Oval Trims Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU802 Cat Back Resonated (EC Approved) with Burnt Titanium Oval Trims 76.2 3 No Yes Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

GPF Back Exhaust Non-Resonated with Titanium Oval Trims Part No. Description Pipe Ø (MM) Pipe Ø (INCHES) EC approved Race System Valvesonic SSXAU799 GPF Back Exhaust - Non Resonated 76.2 3 No No Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Non-Resonated with Polished Oval Trims (170x107mm) (Non-OPF/GPF Models Only) Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU741 Cat Back Non-Resonated with Polished Oval Trims 76.2 3 No No Yes   Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Non-Resonated with Cerakote Black Oval Trims (170x107mm) (Non-OPF/GPF Models Only) Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU740 Cat Back Non-Resonated with Cerakote Black Oval Trims 76.2 3 No No Yes   Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less