Performance - Audi S3 8Y

Racingline Turbo Muffler Delete EA888 Gen.4 – VWR160000 The Tapered Turbo Muffler Delete for 2.0 TSI EA888.4 245ps is a sleek single billet design combined with larger diameter silicone joiner hose which replaces the restrictive, power-robbing compressor outlet with a smooth, turbulence-free air path exiting the turbo. The standard part is located on the outlet of the turbo compressor to reduce engine bay acoustics, but adds in disruptive turbulence to the airflow right where you don’t want it. The OEM part is a 38mm inner diameter throughout, whilst the RacingLine tapered design enlarges up to 53mm, joining perfectly with the smooth 53mm, internally-stepped silicone hose. By replacing the standard part with the tapered Turbo Muffler Delete and Silicone Hose, you’ll replace this unwanted restriction with a smooth CFD-developed uninterrupted air path. The result: noticeably better boost response giving a little more power and throttle reaction, all the while being able to actually hear your turbo working. Please Note: NOT SUITABLE FOR 300+ PS ENGINES   Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR160000

Read more less

Racingline Turbo Inlet EVO EA888 Gen.4 Engines with Garrett Turbos FOR 2.0TSI ‘LOWER OUTPUT’ 245PS EA888.4 Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo. For the Garrett turbo (lower output) 245ps engines such as Golf 8 GTI, Audi A3, Leon Cupra and Octavia vRS only. Our new Turbo Inlet System for the 245PS MQB ‘EVO’ cars such as Golf 8 GTI is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic ‘bellows’ pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet – in other words, terrible for flow. The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 62.5mm on the factory part right up to 76mm. It’s by combining the two parts of the kit that’s allowed us to enlarge the diameter of both the Inlet and the Hose so much – and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! Confirmed Applications VW Golf 8 GTI 2020+VW Tiguan II 2.0 TSI 245ps 2021+ Audi A3 2.0 TSI 8Y 2020+Audi TT 45 TFSI 2.0 TSI 8S 2021+Audi Q3 45 TFSI 2.0 TSI 2018+ Cupra Leon IV 245 TSI FW 2020+Cupra Formentor 245PS 2020+ SEAT Tarraco FR Sport 2.0 TSI 245ps 2021+ Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR120003

Read more less

Racingline Turbo Inlet EVO EA888 Gen.4 Engines with Continental Turbos FOR 2.0TSI ‘HIGHER OUTPUT’ 300PS – 320PS EA888.4 – TURBO 90 INLET & SILICONE INLET HOSE COMBINATION Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo. For the Continental turbo (higher output) 300-320ps engines such as Golf 8 R, Golf 8 GTI CS, Audi S3 8Y, Cupra Leon and Formentor models. Our new Turbo Inlet System for the 300-320PS MQB ‘EVO’ cars such as Golf 8R, GTI CS, Audi S3 8Y etc is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic ‘bellows’ pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet – in other words, terrible for flow. The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 74mm on the factory part right up to 84mm. It’s by combining the two parts of the kit that’s allowed us to enlarge the diameter of both the Inlet and the Hose so much – and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! Confirmed Applications VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Arteon R 2.0 TSI 320ps 2020+VW Tiguan II R 2.0 TSI 320ps 2021+ Audi S3 8Y 2020+ Cupra Leon IV 300 TSI FW 2020+Cupra Formentor 310PS 2020+

Read more less

Racingline R600 Carbon Fibre Intake Lid – Gloss/Matte Finish Transform your engine bay with the addition of a true R600 carbon fibre lid. Confirmed Fitment Suitable for existing R600 Intake part numbers; VWR12G7R600 VWR12G7R601 VWR12G7R600E VWR12G7R601E Not suitable for EA888 Gen.4 Engine Vehicles – e.g. S3 8Y, Mk8 Golf R, Cupra Leon Mk4. Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less

Racingline Cup Edition Intake Package – Mk7 Golf ‘R’/GTI, Audi S3 8V/TTS, Cupra 280/290/300 and Skoda Octavia VRS The brilliant looking Racingline Cup Edition intake package is suitable for stage 1, 2 and 3 vehicles or anyone looking for that extra air intake power and sound on MQB, Mk7 and 2.0TSI vehicles. RACINGLINE CUP EDITION INTAKE The VWR Cold-Air Intake System kit delivers cold fresh air from outside the engine bay straight to your engine via a large-diameter free-flowing intake pipe. The intake uses an oversize domed High-Flow TriFoam™ air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow with lower restriction, to ensure that the largest volumes of the coolest possible air is available to the engine at all times. This maximizes efficiency and improves driveability and torque throughout the rev range – turbocharger spool dropped nearly 500 RPMs, reducing turbo lag and creating faster turbo response. TURBO INLET PIPE Another essential element to the airflow between intake and turbo is our Turbo Inlet Hose. Replace the restrictive standard plastic ‘bellows’ pipe with our free-flowing, ultra smooth reinforced silicone pipe. TURBO 90 INLET Release a valuable power increase comes from fitting our ‘thin wall’ Turbo 90 Inlet to replace the highly restrictive standard plastic MQB elbow. Compatible with all intake pipes and all factory turbos, and beautifully machined and gloss-anodised for a perfect, simple fitment. Optional TURBO MUFFLER DELETE A valuable part of your MQB car’s smooth breathing – replace the disruptive airflow of the stock part with our precisely-machined single-piece Turbo Muffler Delete. And, as a side benefit, you’ll get to hear your turbo working at last.   Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Audi TTS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

As part of our expanding VW product range, AIRTEC Motorsport is proud to launch our induction kit upgrade aimed at modified Golf R owners who want to improve the performance of their car with a simple, bolt-on modification for track or fast road use. AIRTEC Part No: ATIKVAG7 TECHNICAL DATA As part of our expanding VW and Audi product ranges, AIRTEC Motorsport is proud to launch our induction kit upgrade aimed at modified EA888 Gen 4 owners who want to improve the performance of their car with a simple, bolt-on modification for track or fast road use.   This freer-flowing induction kit replaces the car’s original air box and restrictive intake set up. It features our large cotton cone filter, a replacement aluminium intake pipe and new air box enclosure to significantly improve the car’s breathing by increasing the amount of cold air it can take in, therefore offering increases power, performance and sound. The filter is protected from warm air within the engine bay by a laser cut heat shield and the air box is force fed fresh air from the replacement guide, which utilises both of the front grille air intakes. The air box’s slotted lid helps to provide a heightened induction noise and the comprehensive fitting kit also includes a replacement Pro Hoses silicone coolant pipe that redirects underneath the air box to allow more space.   The kit fits neatly in place of the original to improve the look of the engine bay and comes with all fixtures, fittings and instructions for a direct, bolt-on installation.   Its improved air flow, performance, sound and visual gains, as well as its straightforward fitment make it an essential modification for all modified EA888 Gen 4 platform models.   Fitment 2021 onwards – VW Mk8 Golf R 2.0T2021 onwards – VW Mk8 GTI 2.0T2021 onwards – Audi 8Y A32021 onwards – Audi 8Y S3   Features: Comprehensive kit designed specifically for the EA888 Gen 4 platform Improved air flow for power and performance increases Large cotton cone air filter Aluminium intake pipe Laser cut heat shield helps protects from warm air Slotted lid for improved induction noise Utilises both front grille air intakes High quality powder-coated black finish Pro Hoses replacement silicone hose Detailed fitting instructions included AIRTEC Part No: ATIKVAG7

Read more less

Racingline Performance R600 Intake EA888 Gen.4 Cold Air Induction Kit The RacingLine R600 Intake is the world’s most sophisticated and best-selling MQB-platform cold air intake, with a choice of two filter element types. And now, introducing our new R600 EVO version for the latest MQB EVO models such as Golf 8, Audi S3 8Y etc. Looking for the most sophisticated cold-air intake available for your MQB or MQB ‘EVO’ 2.0 or 1.8 TSI? The R600 intake is our best selling system for this platform. Little wonder, as it combines OEM-standard design and quality with significant power gains on uprated cars. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part. Twin CFD-optimised front intakes extending across the front of the car help achieve lower intake temperatures and worthwhile power gains. Enormous airbox volume houses the filter, complete with thoughtful details like connection to the original factory drain tube, and an SAI connection for US cars. Your choice of filter unit, to suit different needs. Both are double the size of standard – rated right up to 600hp and beyond. TRIFOAM® or Pleated Cotton Filter? Foam – Faster, for longer – The highest airflow of all filter types, for the best possible power for more of the time. As a high performance part, regular maintenance is essential to keep it at its very best. Cotton – Fit and forget – A robust ‘fit and forget’ filter that will last for years. It gives great initial power output but doesn’t have the dust-loading capacity of Trifoam. Ideal for Stage 1, 2 and 3 Tuning The PU material used for its construction is the same as the original factory air box and engine-cover, textured to match into the exact same finish. But it’s not just the appearance that’s built to OEM standard. The mounting points use the factory system, ensuring simple and reliable fitment, with nice details such as the factory drain-hole being retained. Huge filter area = 43,200mm Huge power gains over 4000rpm Racingline Performance R600 filter area = 96,477 mm Hand built in the UK Confirmed Fitment 2.0 TSI MQB ‘EVO’ / EA888.4 engines NEW!VWR1200R600E Trifoam filter // VWR1200R601E Cotton filter VW Golf 8 GTI 2020+VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Arteon R 2.0 TSI 320ps 2020+VW Tiguan II 2.0 TSI 245ps 2021+VW Tiguan II R 2.0 TSI 320ps 2021+ Audi S3 8Y 2020+Audi A3 2.0 TSI 8Y 2020+ Cupra Leon IV 300 TSI FW2020+Cupra Leon IV 245 TSI FW 2020+Cupra Formentor 310PS 2020+Cupra Formentor 245PS 2020+ Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR1200R600E-PAR

Read more less

Racingline Cup Edition Intake System VWR12G7CUP The VWR Cold-Air Intake System kit delivers cold fresh air from outside the engine bay straight to your engine via a large-diameter free-flowing intake pipe. The intake uses an oversize domed High-Flow TriFoam™ air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow with lower restriction, to ensure that the largest volumes of the coolest possible air is available to the engine at all times. This maximizes efficiency and improves driveability and torque throughout the rev range – turbocharger spool dropped nearly 500 RPMs, reducing turbo lag and creating faster turbo response. Racingline Open Cone Intake The intake uses a fully formed black powder-coated aluminum shield which separates the high flow triple-layer filter from the hot air of the engine bay.  The shield extends not only up to the underside of the hood/bonnet, but also underneath the filter unit ensuring the best possible separation of cold, fresh air from the heated air of the rest of the under-bonnet area. As a race-bred intake system, you can hear the rich induction noise as soon as you first accelerate hard.  With the increased airflow from this system, you will also not miss the sound of the diverter valve opening when you lift between gears. Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Audi TTS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Arteon (2017-present) Volkswagen Golf Mk7 2012-present

Read more less