Performance - Audi TT MK3 8S

Revo Engine Mounts More power results in more movement during aggressive acceleration. The stock engine mounts, designed to favour comfort over performance, fail to manage axle hop and torque effectively requiring you to ease off in order to gain traction. Designed to significantly reduce this engine movement, Revo engine mounts use Dual Durometer technology to minimise noise, vibration and harshness levels (NVH) while drastically improving traction and acceleration. The engine, transmission and torque mounts have been CAD designed to offer OE quality fitment with the performance benefits and quality of a Revo product. Key Features Dramatically reduce engine movement Improved acceleration and torque Dual Durometer Technology Comes with removal tool for torque mount Engine & Transmission Mount The primary design goal of the engine and transmission mounts was to provide a management system for engine movement during vehicle operation with increased power/torque, in order to retain vehicle acceleration and tyre contact during aggressive driving. The aforementioned solution must also continue to dissipate the NVH naturally created by the drivetrain. To accomplish this, the bushing design of past Revo engine mounts was retained in the MQB engine and transmission mounts, allowing Revo engineers to focus their efforts on bushing stiffness/type to accomplish the task. Torque Mount Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting the mount does not require the sub-frame to be removed, reducing installation time and the need for axle re-alignment. A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. Materials, Manufacturing & Fitment Effective design and fitment plays a principal role in managing engine movement to ensure optimal acceleration and tyre contact with the road while dissipating NVH experienced from the drivetrain. Each component has been designed using CAD technology to ensure precision fitment and is supplied with class 12.9 hardware to replace the standard fixings. To ensure optimum strength and durability, brackets and housings are CNC machined from 6061-billet aluminium and finished with an anodised coating to protect from heat and corrosion. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructionsDownload the Revo MQB Engine Mount Instructions HERE Fitting instructionsDownload the Revo MQB Torque Mount Instructions HERE Fitting instructionsDownload the Revo MQB Transmission Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull kit includes engine mount, transmission mount , torque mount and torque mount installation tool Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards

Read more less

Following two years of extensive testing and development, Direnza is proud to present a revolution in engine mount design. Based on the findings of research into the limitations of conventional engine mounts, Direnza’s new design dramatically increases the strength of the connection between engine and vehicle chassis compared with stock mounts, significantly reducing a motor’s movement under load and during hard cornering. Created by automotive engineers using sophisticated CAD software, and honed with finite element analysis (FEA), Direnza’s new engine mounts noticeably improve throttle and turn-in response, as confirmed by professional drivers during road and track testing sessions. Enhancing the appearance of any engine bay, the mount bodies are manufactured from aircraft grade 6061-T6 aluminum anodized black, and are complemented by stiff poly bushings finished in contrasting red. As a special touch, the Direnza logo is machine-etched into the mount body. Fitment Audi A3 8V 2.0 TFSI 2012-onwards modelsAudi TT MK3 8S 2.0 TFSI 2014-onwardsSeat Leon 5F 2.0 TSI 2012-onwardsSkoda Octavia 5E 2.0 TSI 2013-onwardsVolkswagen Golf MK7 2.0T 2012-onwards Please note – Uprated engine mounts will increase vibrations felt through the cabin and as such are intended for track use Bolts included with this product must be checked for tightness before installation. Product Category Other Part Number DZEM050

Read more less

Following two years of extensive testing and development, Direnza is proud to present a revolution in engine mount design. Based on the findings of research into the limitations of conventional engine mounts, Direnza’s new design dramatically increases the strength of the connection between engine and vehicle chassis compared with stock mounts, significantly reducing a motor’s movement under load and during hard cornering. Created by automotive engineers using sophisticated CAD software, and honed with finite element analysis (FEA), Direnza’s new engine mounts noticeably improve throttle and turn-in response, as confirmed by professional drivers during road and track testing sessions. Enhancing the appearance of any engine bay, the mount bodies are manufactured from aircraft grade 6061-T6 aluminum anodized black, and are complemented by stiff poly bushings finished in contrasting red. As a special touch, the Direnza logo is machine-etched into the mount body. Fitment Audi A3 8V 2.0 TFSI 2012-onwards modelsAudi TT MK3 8S 2.0 TFSI 2014-onwardsSeat Leon 5F 2.0 TSI 2012-onwardsSkoda Octavia 5E 2.0 TSI 2013-onwardsVolkswagen Golf MK7 2.0T 2012-onwards Please note -Uprated engine mounts will increase vibrations felt through the cabin and as such are intended for track use Bolts included with this product must be checked for tightness before installation. Product Category Other Part Number DZTM008

Read more less

REVO TORQUE MOUNT KIT More power results in more movement during aggressive acceleration. The stock torque mount is designed to offer comfort over performance and does not manage engine movement effectively. Designed to significantly reduce the loss of torque and drastically improve traction and acceleration, the Revo Torque mount has little to no effect on vibration and harshness levels (NVH) felt in the cabin. KEY FEATURES Dramatically reduce drivetrain movement Improved acceleration and torque Powerflex polyurethane bushings Simple and easy to install with the tool included Doesn't require sub-frame removal for installation   Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration.    FITTING KIT A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. This allows the OEM part to be removed and the Revo part to be installed without removing the sub-frame, reducing installation time and the need for axle re-alignment.      OEM COMFORT, AFTERMARKET PERFORMANCE  To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears.    VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 (8V) 2.0 TSI 2012 - 2019 Audi A3 (8Y) 2.0 TSI 2020 onwards Audi Q2 (GA) 2.0 TSI 2017 onwards Audi Q3 (F3) 2.0 TSI 2019 onwards Audi TT (MK3) 2.0 TSI 2014 onwards Audi TTS (MK3) 2.0 TSI 2014 onwards Audi  RS3 2.5TFSI 2016 onwards Seat Leon (MK3) 2.0 TSI 2012 - 2019 Skoda Octavia (Mk3) 2.0 TSI 2013 - 2019 VW Golf GTi (Mk7) 2.0 TSI 2012 - 2020 VW Golf R (Mk7) 2.0 TSI 2012 - 2020 VW Golf GTi (Mk8) 2.0 TSI 2020 onwards VW Golf R (Mk8) 2.0 TSI 2020 onwards   Notes: Simple replacement of the OEM part Lower torque mount kit includes torque mount and Installation Tool Full Mount Kit available, including Engine, Transmission and Torque mount  Performance Engines mounts will produce more vibrations at low RPM then softer OEM Mounts. Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

REVO ENGINE MOUNTS More power results in more movement during aggressive acceleration. The stock engine mounts, designed to favour comfort over performance, fail to manage axle hop and torque effectively requiring you to ease off to gain traction. Designed to significantly reduce this engine movement, Revo engine mounts use Powerflex bushings to minimise noise, vibration and harshness levels (NVH) while drastically improving traction and acceleration. The engine, transmission and torque mounts have been CAD designed to offer OE quality fitment with the performance benefits and quality of a Revo product. KEY FEATURES Dramatically reduce engine movement Improved acceleration and torque Powerflex polyurethane bushings Comes with a removal tool for torque mount   ENGINE & TRANSMISSION MOUNT The primary design goal of the engine and transmission mounts was to provide a management system for engine movement during vehicle operation with increased power/torque, to retain vehicle acceleration and tyre contact during aggressive driving. The aforementioned solution must also continue to dissipate the NVH naturally created by the drivetrain. To accomplish this, the bushing design of past Revo engine mounts was retained in the MQB engine and transmission mounts, allowing Revo engineers to focus their efforts on bushing stiffness/type to accomplish the task. TORQUE MOUNT Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting the mount does not require the sub-frame to be removed, reducing installation time and the need for axle re-alignment. A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible.   MATERIALS, MANUFACTURING & FITMENT Effective design and fitment play a principal role in managing engine movement to ensure optimal acceleration and tyre contact with the road while dissipating NVH experienced from the drivetrain. Each component has been designed using CAD technology to ensure precise fitment and is supplied with class 12.9 hardware to replace the standard fixings. To ensure optimum strength and durability, brackets and housings are CNC machined from 6061-billet aluminium and finished with an anodised coating to protect from heat and corrosion. POWERFLEX BUSHINGS Powerflex utilises a unique formula of polyurethane, custom-designed to ensure optimum fitment in the machined housings. After testing various amounts of compliance, our engineers were able to fine-tune the final bush to achieve a balance between performance and comfort. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Our specified durometers provide a stiffer mount to limit the engine movement without compromising on NVH (Noise Vibration Harshness) levels in the process.     OEM COMFORT, AFTERMARKET PERFORMANCE To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears.         VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards   Notes: Simple replacement of the OEM part Lower torque mount kit includes torque mount and Installation Tool The full kit includes engine mount, transmission mount, torque mount and torque mount installation tool Performance Engines mounts will produce more vibrations at low RPM then softer OEM Mounts. Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less