Performance - Audi TT MK3 8S

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Res-X Resonator Delete, MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro 034Motorsport is pleased to introduce the Res-X Resonator Delete for MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro Models! The 034Motorsport Res-X Resonator Delete for MkVII Volkswagen Golf R and 8V Audi A3/S3 Quattro unleashes a throaty growl that exudes the sound of performance and warns bystanders that this isn’t your average 4-cylinder. The new aggressive exhaust note is accomplished by removing the heavy factory resonator and replacing it with a ready-to-install 034Motorsport Res-X Resonator Delete. 2.0 TFSI The 034Motorsport Res-X Resonator Delete unleashes a throaty growl that exudes the sound of performance and warns bystanders that this isn’t your average 4-cylinder. The new aggressive exhaust note is accomplished by removing the heavy factory resonator and replacing it with a ready-to-install 034Motorsport Res-X Resonator Delete. No welding required! This is a true bolt-in exhaust upgrade that eliminates the quiet factory resonator for a deeper exhaust growl. Enjoy a more aggressive exhaust note with no noticeable drone inside the cabin at a fraction of the cost of more expensive cat-back systems. 8V Audi A3/S3 Quattro & MkVII Volkswagen Golf R Res-X Features 304 Stainless Steel Construction Deeper, Aggressive Exhaust Note No Added Drone Inside Cabin Lighter Than Factory Resonator Completely Reversible Installation What’s Included 034Motorsport Res-X Resonator Delete for MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro Exhaust Clamps For Bolt-In Installation x 2 Application Guide 2015 – Present Audi A3/S3 Quattro (8V – MQB) 2.0 TFSI 2015 – Present Volkswagen Golf R (MkVII – MQB) 2.0 TFSI Installation Instructions Click Here! 034-105-7041 – SUPPLIER_CODE 034-105-7041

Read more less

Active Valve Control (AVC) is available to support both vehicles equipped with factory valves on the exhaust as well as a growing range of upgrades Milltek Sport offers to have performance exhaust systems with Valve Control. Also with optional App control on selected models, via iPhone or Android smartphone app’s, AVC brings total control of the exhaust to the drivers finger tips, via full CAN BUS integration with built in safety controls, Milltek’s AVC enables the driver to choose when the valves open and close to tune the sound and volume of the exhaust.       All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and 

Read more less

Large Bore Downpipe and Hi-Flow Sports Cat-Fits both OE and Milltek Sport Cat Back Systems (Non-OPF/GPF Models Only) Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU726 Large Bore Downpipe and Hi-Flow Sports Cat-Fits both OE and Milltek Sport Cat Back Systems 76.2 3 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Large-bore Downpipe and De-cat-Fits both OE and Milltek Sport Cat Back Systems (Non-OPF/GPF Models Only) NOTE to Customers - Due to Design of Turbo Waste Gate fitting a decat can cause metallic rattle to be heard more than the OE Cat Downpipe Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU727 Large-bore Downpipe and De-cat-Fits both OE and Milltek Sport Cat Back Systems 76.2 3 Yes No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

The HJS tuning ECE Downpipes are specifically designed to be fully road legal within Europe (R103 compliant) while still providing the benefits of the High Flow Sports Cat. HJS ECE Cats do not require engine ECU software upgrades and will not trigger a check engine light, ranging between 200 to 300 cells and designed to fit with the OE cat back system or Milltek Sport cat back systems.       All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less

Fits both OE and Milltek Sport Cat Back Systems, Not required on Turbo Back System *** Not all vehicles come equipped with secondary cats, visual check recommended before ordering *** (Non-OPF/GPF Models Only) Part No. Description Tailpipe Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU588 Secondary Catalyst Bypass Pipes - Fits both OE and Milltek Sport Cat Back Systems Not required on Turbo Back System 76.2 3 No 3 No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Non Resonated (Louder) with Burnt Titanium Oval Trims Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU794 Cat Back Non Resonated (Louder) with Burnt Titanium Oval Trims 76.2 3 No No Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Non Resonated (Louder) with Cerakote Black Oval Trims {Re-uses Valve Motors from OE System} Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU731 Cat-back-Cat Back Non Resonated (Louder) with Cerakote Black Oval Trims 76.2 3 No No Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Non Resonated (Louder) with Polished Oval Trims {Re-uses Valve Motors from OE System} Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU732 Cat Back Non Resonated (Louder) with Polished Oval Trims 76.2 3 No No Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Non Resonated (Louder) with Titanium Oval Trims Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU793 Cat Back Non Resonated (Louder) with Titanium Oval Trims 76.2 3 No No Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Resonated (EC Approved) with Burnt Titanium Oval Trims Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU792 Cat Back Resonated (EC Approved) with Burnt Titanium Oval Trims 76.2 3 No Yes Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less