Performance - Audi TT MK3 8S

Racingline Performance Stainless Steel Braided Brake Line Set The ideal first upgrade for your Stock Braking System Racingline Performance Stainless Steel Brake Lines are engineered to replace the standard brake lines with a harder wearing hose that is less prone to expansion under high temperatures.These will not only give a better pedal feel than the standard brake lines, but also last much longer. Compatible with all DOT4 and Performance Brake Fluids This Kit consists of:– 2x Front Brake Lines– 2x Rear Brake Lines– 8x Banjo Washers IMPORTANT NOTES:– YOU WILL NEED TO RE-USE THE EXISTING BANJO BOLTS– THE REAR HOSES ARE ONLY SUITABLE FOR VEHICLE WITH ELECTRONIC HANDBRAKE   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR69G7KIT

Read more less

Racingline Gen.3B Silicone Intake Hose (Black) – 2.0T 190PS Engines The Racingline Performance High-Flow Turbo Inlet Pipe for Gen3 B has been engineered to increase air flow through to the turbocharger as the perfect compliment our Racingline Performance R602 Cold Air Intake or even the standard airbox. A simple fitment, it replaces the entire restrictive rear factory plastic ‘bellows’ pipe between the airbox and the turbocharger inlet pipe. This Turbo Inlet Pipe is a large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake.  There are solid turbo inlet pipes on the market, but without this compliance as the engine rocks under power, then something has to give – with a solid pipe it will either be your intake, or the pipe itself. Confirmed Applications VW Passat 2.0 TSI 190hp B8 2018+ 3G VW Arteon 2.0 TSI 190hp 2017+ VW Tiguan II 2.0 TSI 190hp 2018+ VW T-Roc 2.0 TSI 190hp 2017+ Audi A3 40TFSI 2.0 TSI 190hp 2016+ Audi Q2 40TFSI 2.0 TSI 190hp 2017+ Audi Q3 40TFSI 2.0 TSI 190hp 2018+ Audi TT 40TFSI 2.0 TSI 197hp 2018+ SEAT Leon III 2.0 TSI 190hp 2018+5F SEAT Ateca 2.0 TSI 190hp 2017+ SEAT Tarraco 2.0 TSI 190hp 2018+ Skoda Octavia III 2.0 TSI 190hp 2017+ 5E Skoda Superb III 2.0 TSI 190hp 2019+ 3V Skoda Karoq 2.0 TSI 190hp 2018+ Skoda Kodiaq 2.0 TSI 190hp 2018+ Looking for the MQB platform compatible R600 Intake? (Golf R/GTI, S3/TTS, Leon Cupra 280/290/300) IMPORTANT NOTES:– This intake will only fit 2.0TSI Gen3 B ‘190PS’ vehicles.– It is not compatible with the 220/230/245/265/280/290/300/310ps models. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12G7R602ITBLA

Read more less

Racingline Front Suspension Bush Kit – MQB Platform – VWR44G700 Keep your chassis composed by upgrading your bushings and mounts to a higher quality standard with a stiffer duromter polyurethane bushing. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR44G700

Read more less

Racingline DSG Oil Filter Housings The latest addition to the Racingline range of under-bonnet billet parts are these beautiful billet DSG Oil Filter Housings. This solves the issues of warping and leaking that affect the standard plastic items, and because of the heat conductivity of the aluminium (vs stock plastic), acts as a useful heat-soak to reduce gearbox oil temps. There are two different types of DSG filter housing, depending on your gearbox type 6-speed DQ250/DQ200: VWR19G708 7-speed DQ380/DQ381/DQ500: VWR19G709 Confirmed Applications VW Golf 7/7.5  2012+ 5GVW Golf 6 2008-12 5KVW Golf 5 2003-09 5GVW Passat & Arteon B8 2015+ 3GVW Polo 5 6R/6C Audi A3 2003-2012 8PAudi S3 2006-2012 8PAudi A3 2012+ 8VAudi S3 2013+ 8VAudi RS3 2015+ 8VAudi TT II 2006-2014 8JAudi TT 20 TFSI II 2006-2014 8JAudi TTS II 2008-2014 8JAudi TTRS II 2009-2014 8JAudi TT III 2014+ 8SAudi TTS III 2015+ 8S SEAT Leon Cupra III 2014+ 5F Skoda Octavia vRS III 2014+ 5ESkoda Superb 1.8 / 2.0 TSI 2015+ B8 3V Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR19G70-89

Read more less

Racingline Differential Magnetic Drain/Fill Plug – VWR180003 RacingLine Performance presents the Magnetic Plug Set for the Differentials and Transfer Box on MQB cars. The harder a car is driven, the higher its power, the greater the risk of minute metallic debris being carried by the oil.RacingLine’s new Magnetic Differential Sump Plug traps and removes those microscopic ferrous metal particles from your differential’s lubricating oil. Install couldn’t be simpler – choose the Magnetic Differential Sump Plug set at the next oil-change and simply screw the new plugs in! All Wheel Drive MQB Vehicles with Haldex Generation 5– TWO Plug Set’s per vehicle.– One plug set for Front Transfer Box.– One plug set for Rear Diff Final Drive. All Wheel Drive Vehicles with Haldex Generation 4– ONE Plug Set per vehicle for Rear Diff Final Drive. All Wheel Drive Vehicles with Haldex Generation 2– ONE Plug Set per vehicle for Rear Diff Final Drive. What’s in the Kit? Magnetic Differential Oil Drain Plug Non-Magnetic Oil Filler Plug 10x washers (enough for 5x Services) Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR180003

Read more less

Racingline is excited to present to you the all new Billet Brake Fluid Reservoir Cap for your MQB! The Heavy Weight and Premium Black Finish featuring the Racingline Logo, will compliment the overall aesthetics of any engine bay! Features: Premium Billet Construction Precision Machined and OE Fitment Racingline Logo What’s Included: VWR Billet Brake Fluid Reservoir Cap Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR19G707

Read more less

The Racingline Performance Billet Coolant Cap is beautifully over-engineered in customary Racingline Performance fashion to give an exquisite feel and exceptional product experience. The Racingline Performance Billet Engine Coolant Cap provides a complete replacement for the plastic OEM version. We’re proud of the over-engineering that we’re put into this cap. Manufactured from CNC 5-axis machined billet 6061 aluminium and hard anodised in gloss black for a long lasting, high quality finish. An internal springing mechanism provides the click – and ensures absolute tightness when fitted, even with the heat soak from a high performance engine. A laser etched ÔRacingline’ is the finishing touch and seal of approval for this lovely upgrade. Fitting is pretty obvious – but you will need to gently remove the rubber seal from your factory oil cap and re-install on your new RacingLine Oil Cap before you use it for the first time. Then enjoy that ‘click’ time and again.   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR19G703

Read more less

Racingline Air Intake System Audi TT 2.0 TFSI 211ps (EA888 Gen 2) – VWR121020ML For IHI Turbos (no MAF sensor). Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR121020ML

Read more less

Racingline Adjustable Drop Links Our Adjustable Drop Links are an essential upgrade to any lowered or performance car. If you’ve lowered your car, our Adjustable Drop Links are an essential upgrade to zero the pre-load on your anti-roll bar geometry, plus add stiffness and precision by replacing the stock rubber joints with ball joints. The drop link attaches the front anti roll bar ends to the front damper.  The OEM links were made the length they are for a reason – to compliment the standard ride height. But when you lower ride height, the car will now be pulling your anti roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. These links were developed for our race cars to allow the anti roll bar to work the way it should. Adjusting the height of droplinks to the equivalent of the lowering amount is a must. Available in two lengths: 250mm for cars running standard ride height or with lowering springs. Or, 250mm length for cars running lower than this. VWR420000 – 250mm lengthOEM & Sport Springs VWR420001 – 200mm lengthLowered Coilover set-ups Confirmed Applications VW Polo 2009-2018 6R & 6CVW Polo 2017+ AW VW Golf 5 2005-2008 1KVW Golf 5 GTI & R32 2005-2008 1KVW Golf 6 2008-2014 5KVW Golf 6 GTI 2009-2014 5KVW Golf 6 R 2009-2014 5KVW Golf 7 2012+ 5GVW Golf 7 GTI 2013+ 5GVW Golf 7 R 2013+ 5GVW Golf 7 GTI ClubSport 2016+ 5G VW Passat 2.0 TSI B8 2015+ 3G VW Arteon 2.0 TSI 2017+VW Scirocco 2008+VW Jetta V GLI 2005-2011 1KVW Jetta VI GLI 2011+ 1B Audi A1 & S1 2015-2018 Audi A3 2003-2012 8PAudi S3 2006-2012 8PAudi A3 2012+ 8VAudi S3 2013+ 8VAudi RS3 2015+ 8VAudi TT II 2006-2014 8JAudi TTRS II 2009-2014 8JAudi TT III 2014+ 8SAudi TTRS III 2015+ 8S SEAT Ibiza Cupra 1.8 2017-2018 6JSEAT Leon Cupra/R II 2006-2012 1PSEAT Leon III 2012+ 5FSEAT Leon Cupra III 2014+ 5F Skoda Octavia II 2004-2013 1ZSkoda Octavia vRS II 2004-2013 1ZSkoda Octavia III 2013+ 5ESkoda Octavia vRS III 2014+ 5ESkoda Superb 1.8 / 2.0 TSI 2015+ B8 3V Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWRDROPLINK1

Read more less

Replacement Cotton Filter for the RacingLine R600 The less hassle alternative to Racingline’ Cotton Filter. How does it perform? Foam filters are still the optimum performance for performance, marginally. As the cotton surface becomes slowly contaminated it will start to restrict flow slightly but continue to function well for long periods of time compared to it’s form counterpart which requires cleaning and oiling before eventually deteriorating. Please note, this is a direct replacement filter for the RacingLine R600 Intake Kit, not compatible with the stock airbox. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12G7R601FO

Read more less

Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only) Part number: VWR29G7250 It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it. Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection. The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. What’s included in the kit Oil cooler mounting brackets AN10 210 series Nylon braided feed and return line Billet CNC thermostatic adaptor block Replacement, low-profile oil/water cooler AN10 10-row oil/air cooler core Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar.   Why fit a DSG Cooler Kit? Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation. Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues. Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection. The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

Read more less

A replacement filter for the Racingline Performance / Racingline Performance ‘R600’ Induction Kit Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Audi S3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less