Performance - Audi TTRS 8J
POWERFLEX POWERFLEX BLACK SERIES - AUDI TTRS MK2 8J (2009-2014) REAR DIFF REAR MOUNTING BUSH
This bush fits 4 wheel drive models only. OEM Part Number: 1K0599437 OEM Part Number: 1K0599438 Quantity per car 2 (Price is for amount in pack) INSTRUCTIONS/DRAWING
£90.00
-
POWERFLEX POWERFLEX BLACK SERIES - AUDI TTRS MK2 8J (2009-2014) REAR DIFF FRONT MOUNTING BUSH
This bush fits 4 wheel drive models only where the diff casing measures 30mm in width. The 30mm Differential casing mount is found on AWD 2004-2015 PQ35 platform vehicles. The OEM rubber mount must be part number 1K0 599 431 for this bush to replace. If in doubt, measure the height of the front casing mount before ordering. If the mount is 35mm in height and the OEM part number on your vehicle is 1K0 599 437 then use PFR85-524. OEM Part Number: 1K0599431 Size 30mm Price Ex. VAT: £30.95 Price Inc. VAT: £37.14 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING
£48.14
-
POWERFLEX POWERFLEX BLACK SERIES - AUDI TTRS MK2 8J (2009-2014) REAR ANTI ROLL BAR BUSH 19.6MM
Please check anti roll bar diameter before ordering Size 19.6mm Quantity per car 2 (Price is for amount in pack)
£55.87
-
POWERFLEX POWERFLEX BLACK SERIES - AUDI TTRS MK2 8J (2009-2014) REAR UPPER LINK INNER BUSH
OEM Part Number: 1K0501529 Quantity per car 2 (Price is for amount in pack)
£54.29
-
POWERFLEX POWERFLEX - AUDI TTRS MK2 8J (2009-2014) REAR SUBFRAME REAR MOUNTING BUSH
This bush fits 4 wheel drive models only up to 28.5.2012. OEM Part Number: 1K0505145K OEM Part Number: 1K0505145H Quantity per car 2 (Price is for amount in pack) INSTRUCTIONS/DRAWING
£119.66
-
POWERFLEX POWERFLEX - AUDI TTRS MK2 8J (2009-2014) REAR SUBFRAME FRONT MOUNTING BUSH
This bush fits 4 wheel drive models only up to 28.5.2012. OEM Part Number: 1K0505145J Quantity per car 2 (Price is for amount in pack) INSTRUCTIONS/DRAWING
£119.66
-
POWERFLEX POWERFLEX - AUDI TTRS MK2 8J (2009-2014) REAR DIFF REAR MOUNTING BUSH
This bush fits 4 wheel drive models only. OEM Part Number: 1K0599437 OEM Part Number: 1K0599438 Quantity per car 2 (Price is for amount in pack) INSTRUCTIONS/DRAWING
£80.78
-
POWERFLEX POWERFLEX - AUDI TTRS MK2 8J (2009-2014) REAR DIFF FRONT MOUNTING BUSH
This bush fits 4 wheel drive models only where the differential casing measures 30mm in width. The 30mm Differential casing mount is found on AWD 2004-2015 PQ35 platform vehicles. The OEM rubber mount must be part number 1K0 599 431 for this bush to replace. If in doubt, measure the height of the front casing mount before ordering. If the mount is 35mm in height and the OEM part number on your vehicle is 1K0 599 437 then use PFR85-524. OEM Part Number: 1K0599431 Size 30mm Price Ex. VAT: £28.45 Price Inc. VAT: £34.14 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING
£44.26
-
POWERFLEX POWERFLEX - AUDI TTRS MK2 8J (2009-2014) REAR ANTI ROLL BAR BUSH 19.6MM
Please check anti roll bar diameter before ordering Size 19.6mm Quantity per car 2 (Price is for amount in pack)
£51.12
-
POWERFLEX POWERFLEX - AUDI TTRS MK2 8J (2009-2014) REAR UPPER LINK INNER BUSH
OEM Part Number: 5Q0505323D OEM Part Number: 1K0501529 Quantity per car 2 (Price is for amount in pack)
£54.29
-
Airtec AIRTEC INTERCOOLER UPGRADE FOR AUDI TT RS 8J
TECHNICAL DATA AIRTEC are proud to introduce the front mount intercooler upgrade for the Audi TT RS (8J). Designed to fit all models, this free-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. Featuring a huge 120mm core design together with high-flow, cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper and can be used with the original hoses. As with all AIRTEC products, the intercooler was tested back-to-back on the dyno against the OEM item. This showed a huge reduction in air charge temperatures over standard, as seen below: Rolling Road test results – Carried out at AmD Tuning on 11/04/2017 Standard Intercooler: Run 1 – Into intercooler: 117 degrees – Out of intercooler: 69 degrees Run 2 – Into intercooler: 117 degrees – Out of intercooler: 68 degrees Run 3 – Into intercooler: 119 degrees – Out of intercooler: 78 degrees AIRTEC Intercooler: Run 1 – Into intercooler: 116 degrees – Out of intercooler: 36 degrees Run 2 – Into intercooler: 117 degrees – Out of intercooler: 36 degrees Run 3 – Into intercooler: 118 degrees – Out of intercooler : 37 degrees The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 3-4 hours to complete. The intercooler is available in Pro-Series Black finish, with or without the AIRTEC logo. Please note, the original Audi crash bar will need modifying to fit this intercooler upgrade. If you feel your DIY skills are up to the job, this can be cut yourself. Or we can supply a pre-modified crash bar for a charge of £295. Option 1: Without optional Crash bar – If your DIY skills are up to scratch, why not give it ago yourself Requires existing crash bar to be cut and welded. Option 2: With Crash bar – Modified Crash bar comes powder coated and pre-cut ready to fit – (£295.00) Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black AIRTEC logo available at no extra charge Unbeatable value for money! Approximate Dimensions: Width: 540mm Height: 215mm Depth: 120mm AIRTEC part no: ATINTVAG19
£546.91 - £905.50
-
forge Motorsport High Capacity Piston Valve and Kit For Audi TTRS or RS3 (8P)
This valve kit was developed for those who have tuned, or plan to tune, their Audi TTRS or Audi RS3 in excess of 450hp, as it was observed that cars over 450bhp were randomly getting errors from the stock solenoid valve not functioning. Whilst the stock valve will operate as designed, with the boost level necessary for 450bhp, the stock valve couldn’t move the amount or volume of air it needed to, so the ECU was seeing too great a positive boost in the MAP readings between gearchanges and assuming the stock valve wasn’t functioning correctly. We looked closely at this issue, and noted that there would be no real fix for this as the size of the hole for the valve is too small in the stock elbow. We decided that we would re-design and produce our own elbow, allowing a much larger DV port, which in turn would allow fitment of a larger valve to take advantage of it. We also improved the internal flow of the elbow and removed restriction within the valve. With the engine management on this engine being MAP based rather than MAF based, which is unlike many other Audi engines, we have also incorporated the option into the kit, of being able to run as a recirculation valve or with an atmospheric discharge/blow off. We are pleased to say that this now solves all issues that owners were experiencing. In The Box:1 x FMARSDV Valve1 x Inlet Hard Pipe1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x T - piece6 x Cable Ties1 x 2000mm of 4mm Vacuum Tube2 x M6 x 30 Socket Cap Bolts2 x M6 x 16 Socket Cap Bolts1 x 25mm Blanking Plug2 x 35mm Hose Clamps1 x Straight Silicon Hose (25mm x 65mm)1 x Forge USB Instructions1 x Forge Keyring, Bottle Opener and Sticker If you are unsure if this product is suitable for your application, please contact us. Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
£420.22
